A gas chromatographic determination of residues of eleven insecticides and two metabolites on olive tree leaves

A gas chromatographic (GC) method was developed and statistically validated for the simultaneous determination of residues of pyrethroid, endosulfan, and organophosphorus insecticides and some of their metabolites on olive tree leaves. Pesticide residues were extracted by static extraction with acetone-dichloromethane. After evaporation of the extract to dryness and redissolution in acetone, the organophosphorus insecticides were determined by GC with nitrogen-phosphorus detection. Another portion of the extract, after solvent change to acetonitrile, was cleaned up on an Alumina-N cartridge and analyzed for insecticides sensitive to electron-capture detection (ECD), i.e., pyrethroids and endosulfan and its metabolite. Recoveries of the organophosphorus insecticides ranged from 80.7 to 93.3% with relative standard deviations (RSDs) of < or = 7.2%; recoveries of the ECD-sensitive insecticides ranged from 71.6 to 89.5% with RSDs of < or = 11.6%. The method was used to analyze 26 samples of olive tree leaves from organic olive groves all over Greece, and the results confirmed the viability of the method for routine analysis. Residues of fenthion and fenthion sulfoxide were found in one and 3 samples, respectively, and their identities were confirmed by GC with mass spectrometry.     

Efficient Chemoselective Oxidation of Phenylmethanols to Aldehydes with Iodosobenzene

Summary. Primary phenylmethanols are selectively and efficiently oxidized to the corresponding aldehydes by the system C₆H₅IO/(C₆H₅)₄PBr/CH₂Cl₂, T = 298 K under aerobic conditions. The use of the relatively stable iodosobenzene, an iodine(III) compound, in place of the usually employed and potentially explosive iodine(V) reagents, the easy work-up procedure, and the facile recycling of solvent and oxidant provides a convenient and environmentally benign oxidation method.     

Catalytic Reduction of Hydrazine to Ammonia with MoFe(3)S(4)-Polycarboxylate Clusters. Possible Relevance Regarding the Function of the Molybdenum-Coordinated Homocitrate in Nitrogenase

The catalytic function of the previously synthesized and characterized [(L)MoFe(3)S(4)Cl(3)](2)(-)(,3)(-) clusters (L = tetrachlorocatecholate, citrate, citramalate, methyliminodiacetate, nitrilotriacetate, thiodiglycolate) and of the [MoFe(3)S(4)Cl(3)(thiolactate)](2)(4)(-) and [(MoFe(3)S(4)Cl(4))(2)(&mgr;-oxalate)](4)(-) clusters in the reduction of N(2)H(4) to NH(3) is reported. In the catalytic reduction, which is carried out at ambient temperature and pressure, cobaltocene and 2,6-lutidinium chloride are supplied externally as electron and proton sources, respectively. In experiments where the N(2)H(4) to the [(L)MoFe(3)S(4)Cl(3)](n)()(-) catalyst ratio is 100:1, and over a period of 30 min, the reduction proceeds to 92% completion for L = citrate, 66% completion for L = citramalate, and 34% completion for L = tetrachlorocatecholate. The [Fe(4)S(4)Cl(4)](2)(-) cluster is totally inactive and gives only background ammonia measurements. Inhibition studies with PEt(3) and CO as inhibitors show a dramatic decrease in the catalytic efficiency. These results are consistent with results obtained previously in our laboratory and strongly suggest that N(2)H(4) activation and reduction occur at the Mo site of the [(L)MoFe(3)S(4)Cl(3)](2)(-)(, 3)(-) clusters. A possible pathway for the N(2)H(4) reduction on a single metal site (Mo) and a possible role for the carboxylate ligand are proposed. The possibility that the Mo-bound polycarboxylate ligand acts as a proton delivery "shuttle" during hydrazine reduction is considered.     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.     

The fully deprotonated anion of 1,3,5-benzene-triphosphonic acid: 1H, 31P,and 13C{1H} NMR and some comments on corresponding [AX]3 and AXX′2 spin systems and spectra

Abstract

The fully deprotonated anion of 1,3,5-benzene-triphosphonic acid 1,3,5-C₆H₃[PO₃^2?]₃ gives rise to deceptively simple ¹H and ³¹P NMR spectra due to a corresponding [AX]₃ spin system. The ¹³C{¹H} NMR spectrum reveals two ¹³C isotopomers which are identified via AXX′₂ systems. Results from analysis and iteration are described.     

Unsaturated polyamides and polyesters prepared from 1,4-bis(2-carboxyvinyl)benzene and 4-hydroxycinnamic acid

Various unsaturated polyamides and polyesters were prepared from the reactions of 1,4-bis(2-carboxyvinyl)benzene acid chloride with aromatic diamines and bisphenols, respectively. In addition, various unsaturated homo- and copolyesters were synthesized from 4-hydroxycinnamic acid and 4-hydroxybenzoic acid. They were heat-cured to thermally stable resins. The polymers were characterized by inherent viscosity measurements, FT-IR, x-ray, DTA, TMA, TGA, and isothermal gravimetric analysis. The water absorption as well as the solubility behavior of the polymers was also investigated. © 1996 John Wiley & Sons, Inc.     

A proposal for a convertible stadium roof structure derived from Watt-I linkage

In this paper, a novel convertible stadium roof structure is introduced, which has been derived from a special geometric configuration of Watt-I linkage, a 1-DoF mechanism used in robot technologies as anthropomorphic fingers. The proposed structure can offer a wide range of different shape configurations according to the environmental conditions and spatial needs, thus offering several aesthetic and functional advantages over existing solutions. This paper serves as a feasibility investigation of this concept, mainly from geometric and structural point of view. To that affect, first kinematic analysis and geometric design of this linkage are introduced. Then, structural analyses of the proposed structure with realistic dimensions and loading conditions are performed in three different geometric configurations, in order to discuss strength and stiffness limitations. Finally, potential cover materials and actuators are briefly discussed.     

Evaluating the impact of functional groups on membrane-mediated CO2/N2 gas separations using a common polymer backbone

Polymeric membranes have shown tremendous promise for the separation of CO₂ from flue gas streams. However, few systematic studies have been conducted to better understand the impact that chemical functionalities have on membrane-based gas separation performance. To address this gap, we herein describe the synthesis and gas separation performance of a series of vinyl-addition polynorbornenes bearing various CO₂-philic functional groups. To facilitate direct comparison between functional groups, each material was designed to maintain a common polymer backbone. Though the incorporation of CO₂-philic moieties within a dense polymeric membrane is frequently hypothesized to enhance CO₂ solubility, and thereby increase CO₂/N₂ selectivity, our results demonstrate that the incorporation of CO₂-philic groups onto a common polymer backbone do not necessarily result in increased gas separation performance. Experimental and computational results demonstrate that the incorporation of amidoxime groups onto a polynorbornene backbone increase CO₂/N₂ selectivity, whereas commonly employed ethereal side chains only increased permeability.