Synthesis,characterization, and curing kinetics of novel ladder‐like polysilsesquioxanes containing side‐chain maleimide groups

Two ladder‐like polysilsesquioxanes (LPS) containing side‐chain maleimide groups have been synthesized successfully by reacting N‐(4‐hydroxyphenyl)maleimide (HPM) with LPS containing 100 mol % of chloropropyl groups (Ladder A ) and 50 mol % of each methyl and chloropropyl group (Ladder B ). HPM was synthesized by reacting maleic anhydride with 4‐aminophenol, and the resulting amic acid was imidized using p‐toluenesulfonic acid as a catalyst (Scheme 1 ). The LPSs were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), proton‐decoupled ¹³C NMR, ²⁹Si NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Characterization indicated that these polymers had ordered ladder‐like structures with possible defects. These polymers were soluble in common solvents at ambient temperature, which suggested that they were not crosslinked. Both the polymers and the HPM were cured, and their kinetics were followed by dynamic DSC. The Ozawa and Kissinger methods were used to calculate activation energies for curing. Curing increased the temperature at which both 5% weight loss and maximum rate of weight loss were observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4036–4046, 2004     

Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

Pyrolysis chemical ionization mass spectrometry of cellulose ethers

Pyrolysis ammonia chemical ionization (PyCI) mass spectrometry was performed on hy-droxyethyl-, hydroxypropyl-,methyl-, hydroxypropylmethyl-, and ethylhydroxyethyl cel-luloses. The mass peaks in the PyCI mass spectra of these cellulose ethers could be assigned to the ions of pyrolytic dissociation products which form via the [2 + 2 + 2] cycloreversion and the E_i elimination pyrolysis pathway. Structural information about the residual amount of nonderivatized cellulose, the relative chain length distributions of the substituents in hydroxyalkyl celluloses, and the end-capping of hydroxyalkyl substituents by alkyl groups in the mixed cellulose ethers is obtained. Interference of secondary pyrolysis products in the PyCI mass spectra is found to be of minor importance, especially in the lower mass regions. © 1995 John Wiley & Sons, Inc.     

A study of electrostatic spring softening for dual-axis micromirror

Electrostatic spring softening is an important characteristic of electrostatically actuated dual-axis micromirror, since it lowers the resonant frequencies. This paper presents an approach based on approximating the electrostatic forces by the first-order Taylor's series expansion to investigate this characteristic. The dual-axis micromirror studied in this paper has three motion modes, two torsional (about x- and y-axis, respectively) and one translational (about z-axis). The stiffnesses of all these modes are softened by a DC bias voltage applied to the mirror plate. The resonant frequencies are lowered with the increment of the bias voltage. The relationship of the bias voltage and the resonant frequencies of all the motion modes is derived. The analytical results show that the resonant frequency curves are affected by the capacitor geometries, i.e. the gap between the mirror plate and the electrodes and the electrodes size. The lowering curves drop slowly when the bias voltage is small. While for large bias voltage, the lowering curves drop rapidly. The experiment results are consistent with those obtained by the analytical approach.     

Analytical pyrolysis of carbohydrates: I. Chemical interpretation of matrix influences on pyrolysis-mass spectra of amylose using pyrolysis-gas chromatography-mass spectrometry

Inorganic additives, viz. Na₂CO₃, NaOH, HCl, ZnC₂, NaH₂PO₄, Na₂HPO₄, NaCl. MgSO₄ and sea salt, to the pyrolysis matrix change the pyrolysis-mass spectrum of amylose significantly. Carbonyl compounds, acids and their lactones, furans, pyranones anhydrosugars and aromatic substances are found in different ratios under the various conditions, as determined by pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS).Carbonyl compounds, acids and lactones are released from alkaline and neutral matrices. Furans and anhydrohexoses are particularly formed under neutral and acidic conditions. Pyranones are specific for phosphate matrices. Unsaturated hydrocarbons and aromatic substances arise from strongly alkaline or dehydrating matrices. Degradation pathways are proposed for various compound categories.The results of pyrolysis-mass spectrometry and Py-GC-MS are highly compatible.     

Syntheses and spectroscopic properties of energy transfer systems based on squaraines

The purpose of this project was to prepare fluorescent dyes that could absorb energy at relatively short wavelengths, and fluoresce in the near-IR region. To achieve this, copper- and palladium-mediated C-N couplings were used to prepare the ‘cassettes’, i.e the carbazole derivative 3b and the carbazole-, phenothiazine-, and phenoazine-squaraines 4b-d. These compounds have carbazole, phenothiazine, and phenoazine donor-components that absorb around about 300-320 nm, and squaraine acceptor-parts that fluoresce in the range 650-700 nm. The efficiencies of energy transfer from the donor to the acceptor, and the overall quantum yields of the cassettes were determined.     

Dynamical systems theory for music dynamics

We show that, when music pieces are cast in the form of time series of pitch variations, the concepts and tools of dynamical systems theory can be applied to the analysis of temporal dynamics in music. (i) Phase space portraits are constructed from the time series wherefrom the dimensionality is evaluated as a measure of the global dynamics of each piece. (ii) Spectral analysis of the time series yields power spectra ( approximately f(-nu)) close to red noise (nu approximately 2) in the low frequency range. (iii) We define an information entropy which provides a measure of the local dynamics in the musical piece; the entropy can be interpreted as an evaluation of the degree of complexity in the music, but there is no evidence of an analytical relation between local and global dynamics. These findings are based on computations performed on eighty sequences sampled in the music literature from the 18th to the 20th century. (c) 1995 American Institute of Physics.     

Liquid-liquid-liquid microextraction of aromatic amines from water samples combined with high-performance liquid chromatography

A simple preconcentration and clean-up liquid-liquid-liquid microextraction of aromatic amines is described in this paper. The compounds were extracted from 2.0 ml aqueous samples (donor phase) into an organic phase, layered on the donor phase, and then back extracted to a microdrop of aqueous receiving phase, suspended in the organic phase. After extraction, the microdrop was injected into the HPLC system directly for analysis. Optimal conditions of the extraction were donor phase (a1): 2 ml of water sample adjusted to pH 13 with NaOH-NaCl; organic phase (o), 150 microl ethyl acetate; and receiving phase (a2) of 2 microl aqueous solution at pH 2.1. The a1-->o extraction time was 15 min and for o-->a2, 30 s. 18-Crown-6 ether, which can complex with amine, was added to the aqueous receiving phase to improve the extraction performance. Enrichment factors ranged from 218 (for 4-nitroaniline) to 378 (for 4-chloro-2-aniline). The calibration curve for these anilines was linear within the range 2.5 ng/ml-2.5 microg/ml (r2=0.998). Detection limits ranged from 0.85 to 1.80 ng/mi (at S/N=3). This procedure can be a selective preconcentration method for aromatic amines present in water samples.     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.