A hydrogen-bonding receptor that binds cationic monosaccharides with high affinity in methanol

A dicarboxylate host (1) binds cationic monosaccharides such as D-glucosamine HCl (2), D-galactosamine-HCl (3), and D-mannosamine-HCl (4) with high affinity (K1 = 8.0 x 10(4)-2.0 x 10(5) M(-1)) in methanol. In circular dichroism (CD) spectroscopy a positive exciton-coupling band was observed near 290 nm; this indicates that the saccharides are recognized by multiple point interactions. Since the corresponding neutral monosaccharides are not significantly bound, one may conclude that complex formation is primarily due to the electrostatic interaction between NH3+ in the guest and one carboxylate in the host and secondarily due to hydrogen-bonding interactions of OH groups with the other carboxylate and/or nitrogen bases. Molar ratio plots and Job plots indicate that host 1 and cationic monosaccharide guests form CD-active, pseudo-cyclic 1:1 complexes at low guest concentration followed by the formation of CD-silent, acyclic 1:2 1-saccharide complexes at high guest concentration. The possible binding modes are discussed in detail on the basis of molecular mechanics calculations and chemical shift changes in 1H NMR spectra. The results of competition experiments with several cationic reference compounds bearing fewer OH groups than 2-4 are consistent with the proposed binding model. Thus, the present study is a rare example of saccharide recognition in a protic solvent, where in general, hydrogen-bonding interactions are rarely useful because of strong solvation energy. These are apparently the strongest saccharide complexes involving noncovalent interactions between host and guest. We believe that the findings are significant as a milestone toward development of new saccharide recognition systems ultimately useful in aqueous solution.     

Host-guest complexation effect of 2,3,6-tri-O-methyl-β-cyclodextrin on a C60-porphyrin light-to-photocurrent conversion system

In a light-to-photocurrent conversion system based on a C₆₀-porphyrin bilayer prepared by electrostatic alternate adsorption, porphyrin units in a porphyrin polymer have been isolated by cyclodextrin utilizing the host-guest interaction. In this system, a high quantum yield was achieved by suppression of self-quenching of porphyrin units.     

Thermodynamic Insight into the Origin of a Calix[n]arene-[60]fullerene Interaction and its Application to a Porphyrin-[60]fullerene Energy Transfer System

The calixarene-fullerene interaction,which causes only a slight change in the absorptionspectra, has been substantiated by calorimetricmeasurements: the H° values arecomparable with those obtained from the associationconstants estimated by a spectroscopic method. Furthermore, we determined the association constantbetween homooxacalix[3]arene and [60]fullerenederivatives with a porphyrin moiety by fluorescencespectra.     

Importance of single electron-transfer in singlet oxygen reaction in aqueous solution : Oxidation of electron-rich thioanisoles

Oxidation of substituted thioanisoles by chemically generated singlet oxygen was investigated in polar aqueous media. The formation of the superoxide ion was observed during sulphoxidation of 4-hydroxythioanisole (4) in phosphate buffer at pH 7.5. Control experiments indicated that the superoxide ion was formed by a direct reaction between singlet oxygen and 4. The kinetics of the trapping reaction by diphenylsulphoxide indicated the involvement of a single intermediate. The overall rate constants of the reaction of thioanisoles with singlet oxygen in methanol-water (1:1) are one order of magnitude larger than those in benzene. On the basis of these results, a mechanism involving a charge-transfer complex has been proposed for the reaction of electron-rich thioanisoles with singlet oxygen, whereby the charge-transfer complex would produce persulphoxide directly or dissociate to the cation radical and superoxide ion in polar aqueous media.     

A direct transformation of bicyclic keto esters to N-formimidoyl thienamycin

A convenient direct transformation of $\text{p}$-nitrobenzyl 6-(1′-hydroxyethyl)-1-azabicyclo-(3.2.0)heptane-3,7-dione-2-carboxylate to $\text{N}$-formimidoyl thienamycin utilizing the silylated derivative of $\text{N}$-formimidoyl cysteamine is described.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Charge-transfer phenomena in novel,dual-component,sugar-based organogels

The synthesis of a new saccharide-based gelator (2) containing a donor moiety has been described. Gelation experiments of a dual-component gel consisting of a saccharide-based gelator bearing an acceptor group (1) and of 2 have been performed in a variety of organic solvents and water. Moreover, gelation tests at different molar ratios of 1 and 2 have been performed in water, octanol, and diphenyl ether. In these last two solvents a gel color change was observed, from colorless to yellow, upon cooling of the sample to room temperature. This phenomenon was further investigated by UV-visible spectroscopy, which revealed the presence of charge-transfer interactions in the gel, in octanol. Temperature-dependence UV spectroscopy confirmed that such interactions occur in the gel but not in the corresponding solution sample. Furthermore, T(gel) measurements show that dual-component gels of 1 and 2 present increased thermal stability at a 50:50 ratio of the two gelators, in dependence of the solvent. Transmission electron microscopy (TEM) images of the single-component gels in diphenyl ether revealed that they consist of a fibrous network, while the dual-component gel presents a novel, helical, fibrous-bundle structure.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.