Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Synthesis of bridged heteroaromatic compounds as reference standards for coal degradation products

The synthesis of 2-naphthyl 2′-dibenzothienyl ether, 1-(1′-naphthyl)-2-(4″-acridinyl)ethane and a series of naphthylethyldibenzothiophenes is reported.     

Syntheses of 1-, 2-, 3- and 4-acridinecarbaldehydes

The four acridinecarbaldehydes, namely, acridine-1-carbaldehyde, acridine-2-carbaldehyde, acridine-3-carbaldehyde, and acridine-4-carbaldehyde have been synthesized for the first time.     

Sulfur nitride in organic chemistry. 9. The reaction of tetrasulfur tetranitride with benzyl ketones. Preparation of 3,4-disubstituted-1,2,5-thiadiazoles

The reaction of tetrasulfur tetranitride ( 1 ) with various aryl and alkyl benzyl ketones ( 2a-o ), oxindole ( 11 ), benzyl α-pyridyl ketone ( 12 ) and α-phenacylpyridine ( 13 ) afforded the corresponding 1,2,5-thiadiazoles ( 3a-n, 11 and 14 ). The scope and limitations of the above reaction were investigated and the evidences suggesting the radical anion mechanism are presented.     

Isolation and structure determination of six glucocerebrosides from the starfish Luidia maculata

Two new glucocerebrosides, luidiacerebroside A (2) and B (6), were isolated from the cerebroside molecular species obtained from the less polar fraction of the CHCl3/MeOH extract of the starfish Luidia maculata using HPLC. Four known cerebrosides, CE-2b (1), astrocerebroside B (3), acanthacerebroside B (4), and CE-3-2 (5) have also been isolated and characterized. The structures of these cerebrosides were determined on the basis of chemical and spectroscopic evidence. Mass spectrometry of dimethyl disulfide derivatives was useful for the determination of the double-bond position in the long-chain base.     

Preparation of AB polyacylthioureas and related copolyacylthioureas

Reaction of sulfinylaminobenzoyl chlorides with lead thiocyanate gave sulfinylaminobenzoyl isothiocyanates (SBIs), from which were derived aminobenzoyl isothiocyanate hydrochlorides (ABIHs). AB polyacylthioureas (PATUs) with inherent viscosities of up to 0.28 dL/g were obtained by treating the SBI with an equivalent of water in N-methyl-2-pyrrolidone (NMP). Low-temperature solution polyaddition of the ABIH afforded AB PATU with inherent viscosities of up to 0.66 dL/g, which were further increased to as high as 0.75 dL/g by adding lithium bases to the polymerization mixtures. Polyaddition of isophthaloyl diisothiocyanate with intermediate diamines formed by hydrolyzing the adducts of SBI and aromatic diamines afforded copolyacylthioureas with inherent viscosities of up to 1.15dL/g. The copolymers were generally soluble in NMP, whereas solubilities of the AB PATU in analogous solvents were relatively low. Thermogravimetric analyses in both air and nitrogen exhibited weight losses of 5% at 204–236°C for AB PATU and at 170–192°C for the copolymers.     

Iron-catalysed green synthesis of carboxylic esters by the intermolecular addition of carboxylic acids to alkenes

Iron triflate, in situ-formed from FeCl3 and triflic acid, or FeCl3 and silver triflate efficiently catalyse the intermolecular addition of carboxylic acids to various alkenes to yield carboxylic esters; the reaction is applicable to the synthesis of unstable esters, such as acrylates.     

Revisiting the Rate-Limiting Step of the ANS–Protein Binding at the Protein Surface and Inside the Hydrophobic Cavity

8-Anilino-1-naphthalenesulfonic acid (ANS) is used as a hydrophobic fluorescence probe due to its high intensity in hydrophobic environments, and also as a microenvironment probe because of its unique ability to exhibit peak shift and intensity change depending on the surrounding solvent environment. The difference in fluorescence can not only be caused by the microenvironment but can also be affected by the binding affinity, which is represented by the binding constant (K). However, the overall binding process considering the binding constant is not fully understood, which requires the ANS fluorescence binding mechanism to be examined. In this study, to reveal the rate-limiting step of the ANS–protein binding process, protein concentration-dependent measurements of the ANS fluorescence of lysozyme and bovine serum albumin were performed, and the binding constants were analyzed. The results suggest that the main factor of the binding process is the microenvironment at the binding site, which restricts the attached ANS molecule, rather than the attractive diffusion-limited association. The molecular mechanism of ANS–protein binding will help us to interpret the molecular motions of ANS molecules at the binding site in detail, especially with respect to an equilibrium perspective.     

Colorimetric Calibration of Video Cameras Using Two Color Constancy Models

Colorimetric calibration of color imaging devices is important to realize device independent color reproductions. However the calibration for digital or video cameras is difficult because a color image is acquired for unknown objects under various unknown illuminants. An experiment was carried out based on two computational color constancy models, the finite-dimensional linear model and the spectral sharpening model, to estimate colorimetric values using image data of a color chart captured by video camera. We estimated the colorimetric values by using a single reference reflectance with known spectral reflectance in a color chart under an unknown illuminant. The accuracy was evaluated by color differences in CIELAB color space and was compared on three different color charts under three different illuminants including a fluorescent lamp. It was confirmed that the two computational models do not require prior knowledge of illuminants and surfaces. The finite-dimensional linear model gave more accurate results than the spectral sharpening model in the simulations and experiments.