Aging of concrete buildings and determining the pH value on the surface of concrete by using a handy semi-conductive pH meter.

A new method was devised for measuring the pH of a concrete surface by pHBOY-P2 with a piece of filter paper by extracting the pH value from concrete. This is a simple and inexpensive method that does not damage the concrete building, and is easy to apply on concrete samples for monitoring. By using the method mentioned above, a drastic decrease of the pH value of concrete bridges and buildings has investigated. The method is environmentally friendly to detect the pH value change of concrete as an environmental sample investigation.     

Direct determination of benzamides in serum by column-switching high-performance liquid chromatography.

A column-switching high-performance liquid chromatographic method with fluorescence detection was developed for the simultaneous determination of four benzamide-type anti-psychotic drugs: sulpiride, tiapride, sultopride and metoclopramide in human serum. In this method, a TSKgel Super-ODS column was used as an analytical column, and a TSKgel G 2000SW was prepared as a pretreatment column. Under the optimized analytical conditions, four benzamide-type anti-psychotic drugs were eluted within 18 min. The detection limits (S/N = 3) for sulpiride, tiapride, sultopride and metoclopramide are 1 ng/ml, 4 ng/ml, 2 ng/ml and 0.5 ng/ml, respectively. Finally, the method was applied to the determination of sulpiride in human serum samples obtained after a single oral dose of sulpiride.     

Rapid determination of molar ratios in binary systems by 14 mev neutron activation analysis

The 14 MeV neutron activation analysis method was applied for the rapid and non-destructive determination of the molar ratios of iron(III) oxide and zinc oxide in zinc ferrites. Iron was detected as⁵⁶Mn produced from⁵⁶Fe by the (n, p) reaction, and zinc as the sum of the coincidence counts of the annihilation radiations of the positrons emitted from⁶³Zn and⁶⁴Cu produced from⁶⁴Zn by the (n, 2n) and (n, p) reactions respectively. The ratios of the counts of⁵⁶Mn and the sum of the coincidence counts were not linearly related to the molar ratios of iron(III) oxide and zinc oxide in zinc ferrites. However, by corrections of the mutual contributions to the counts, linear relations were obtained between the ratios of the counts and the molar ratios when the corrected sum of the coincidence counts was used as an internal standard. The experimental and theoretical slopes of the analytical lines agreed within a difference of approximately 10%. The deviations between the results of the activation analysis and those of the chemical analysis were less than 5% of the chemical results.     

Evaluation of thallium-201 myocardial emission computed tomography based on a comparison with postmortem findings

The correlative study of myocardial perfusion assessed by 201Tl myocardial ECT with the pathological finding of the heart was performed in 10 autopsied cases with mean age of 77 years old (range: 60-90 y). In 6 cases with myocardial infarction (MI) 7 perfusion defects were observed, that was, 3 in anteroseptal wall, 1 in anterolateral wall and 3 in posterior wall on the images of SPECT. Seven MIs were also found in postmortem examination. Six MIs were observed at autopsy corresponding to perfusion defect on SPECT images. In one myocardial perfusion defect at inferoposterior portion on SPECT, a non-transmural MI was found at anteroseptum. In one case with valvular disease a false positive result was obtained at posterior wall where neither myocardial necrosis nor fibrosis was observed at autopsy. This case had aortic stenosis due to bicuspid aortic valve by autopsy. The ventricle was divided into 16 segments in each of 4 short axial images to evaluate extent of MI. SPECT for extent of MI showed sensitivity of 81.9%, specificity of 96.0% and diagnostic accuracy of 92.5%. False negative segment was apt to be observed at the surrounding of non-transmural MI or basal half of left ventricle (LV) with transmural MI, while false positive segment was at posterior portion of basal half of LV. It was concluded that myocardial ECT was useful for evaluation of the site and extent of MI.     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

Purification of enzymes by high-speed gel filtration on TSK-GEL SW columns

The purification of enzymes was investigated by high-speed gel filtration on TSK-GEL G3000SWG columns packed with porous silica gel deactivated by chemically bonded hydrophilic compounds. Crude β-galactosidase from bacterial cells and commercial urease were purified ca. 15-fold in a single gel filtration. These enzymes were eluted within an hour from the column and the recoveries of enzymatic activity were almost 100% although the operation was carried out at room temperature (22°). Samples up to 100 mg could be applied to the column without loss of separation efficiency.     

Photoinduced electron-transfer systems consisting of electron-donating pyrenes or anthracenes and benzimidazolines for reductive transformation of carbonyl compounds

Photoinduced electron-transfer reactions of several ketone substrates were studied to evaluate the utilities of 1,6-bis(dimethylamino)pyrene (BDMAP), 1,6-dimethoxypyrene (DMP), 9,10-bis(dimethylamino)anthracene (BDMAA), and 9,10-dimethoxyanthracene (DMA) as electron-donating sensitizers cooperating with 2-aryl-1,3-dimethylbenzimidazolines. BDMAP and DMP generally led higher conversion of ketones and better yield of reduction products compared to BDMAA and DMA.     

Synthesis of branched polysaccharides by polymerization of 6-O-t-butyldimethylsilyl-D-glucal through stereoregular haloglycosylation

In this letter, we report synthesis of branched polysaccharide 2 by glycosylation of glucal-type monomer 1 with two free hydroxy groups at position 3 and 4. Monomer 1 polymerized with N-halosuccinimide promoter in acetonitrile solvent at room temperature--50 degrees C. The product was isolated as a petroleum ether insoluble fraction. The structure was determined by 1H and 13C NMR spectra as well as elemental analysis to be a polysaccharide consisting of 2-halo-2-deoxy-alpha-D-mannoside units, indicating that the polymerization proceeded via stereoregular glycosylation manner. The molecular weights determined by GPC with DMF were 3,300-4,000. The degree of branching was estimated by the NMR data of the product from the reaction of 2 with 3,5-dinitrobenzoyl chloride.     

Novel polysiloxane formation process from dimethyldiethoxysilane in the presence of oxalic acid

Polysiloxane formation in dimethyldiethoxysilane (DMDES)-ethyl alcohol (EtOH(D))-oxalic acid (OA) (DMDES:EtOH(D):OA=1:2:0.5) and DMDES-dimethylsulfoxide (DMSO)-OA (DMDES:DMSO:OA=1:2:0.5) systems was investigated by gas chromatography-mass spectrometry and ²⁹Si-nuclear magnetic resonance. While the DMDES-EtOH(D)-OA system was homogeneous, the DMDES-DMSO-OA system consisted of two immiscible phases. In both systems, ethoxy-terminated linear oligomers ((EtO)Me₂SiO(Me₂SiO)_nSiMe₂(OEt); n=0–4, Et = C₂H₅, Me = CH₃) and cyclic tetramer ((Me₂SiO)₄) were identified. The reaction mechanism for polysiloxane formation is discussed.