Mechanical properties of clay‐reinforced polyamide

Intercalated and exfoliated nanocomposites were prepared by extrusion and injection of polyamide‐6 and highly swollen or slightly swollen montmorillonite, respectively. The microstructure of the nanocomposites has been studied previously. In this article, we investigated the influence of the preferential orientation of the montmorillonite sheets on the mechanical properties of the nanocomposites. Dynamic mechanical analysis and tensile tests showed that the elastic modulus depends mainly on the filler loading. A parallel coupling could well account for the behavior of the nanocomposites. The calculated elastic and storage moduli of montmorillonite were set to 140 and 40 GPa, respectively. Compression tests were performed to study the anisotropy of the mechanical properties. The elastic modulus and flow strain were sensitive to the filler orientation. A Tandon–Weng approach was applied to consider the geometry of the filler. In all low‐deformation tests, no significant difference between intercalated and exfoliated systems was observed. Finally, the influence of the dispersion and exfoliation state of the filler on the ultimate properties of the nanocomposites (tensile tests) is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 272–283, 2002     

The synthesis and chemistry of some bis-aziridinylketones and their spectral study

The synthesis and spectral characteristics of certain bis(1-alkyl-3-phenyl-2-aziridinyl)ketones are reported. The reactions of 1,2,4,5-tetrabromo-1,5-diphenyl-3-pentanone ( 2 ) with primary amines are assumed to have a mechanism similar to that of a simple dibromo-ketone. The so-called cis, cis- or trans, trans-configurations of the bis-aziridinylketones were determined by ¹H and ¹³C nmr spectra.     

cis- and trans-N-nitroso-2,4-diphenylazetidines

The synthesis of cis- and trans-2,4-diphenylazetidines as well as that of their N-nitroso derivatives is described. The “abnormal” reduction of the N-nitrosamines gives a cis-trans mixture of the expected 1,2-diphenylcyclopropanes. However, no stereochemical correlations could be made owing to the base-induced isomerization of the starting N-nitrosamines during the course of the reaction.     

Trioxatriangulenium (TOTA+) as a robust carbon-based Lewis acid in frustrated Lewis pair chemistry

We report the reactivity between the water stable Lewis acidic trioxatriangulenium ion (TOTA⁺) and a series of Lewis bases such as phosphines and N-heterocyclic carbene (NHC). The nature of the Lewis acid–base interaction was analyzed via variable temperature (VT) NMR spectroscopy, single-crystal X-ray diffraction, UV-visible spectroscopy, and DFT calculations. While small and strongly nucleophilic phosphines, such as PMe₃, led to the formation of a Lewis acid–base adduct, frustrated Lewis pairs (FLPs) were observed for sterically hindered bases such as P(^tBu)₃. The TOTA⁺–P(^tBu)₃ FLP was characterized as an encounter complex, and found to promote the heterolytic cleavage of disulfide bonds, formaldehyde fixation, dehydrogenation of 1,4-cyclohexadiene, heterolytic cleavage of the C–Br bonds, and interception of Staudinger reaction intermediates. Moreover, TOTA⁺ and NHC were found to first undergo single-electron transfer (SET) to form [TOTA]·[NHC]˙⁺, which was confirmed via electron paramagnetic resonance (EPR) spectroscopy, and subsequently form a [TOTA–NHC]⁺ adduct or a mixture of products depending the reaction conditions used.

Frustration at carbon! Herein, we present a frustrated Lewis pair system derived from a water stable carbon-based Lewis acid, trioxatriangulene (TOTA⁺), and a variety of Lewis bases, which successfully promotes bond cleavage and molecule fixation.     

Synthesis and structure–property relationship of carbazole‐alt‐benzothiadiazole copolymers

A series of four π‐conjugated carbazole‐alt‐benzothiadiazole copolymers (PCBT) were prepared by Suzuki cross‐coupling reaction between synthesized dibromocarbazoles as electron‐rich subunits and 4,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)?2,1,3‐benzothiadiazole as electron‐deficient subunits. The subunits were directly linked through 2,7‐ or 3,6‐ positions of the carbazole. In addition, the carbazole monomers have been N‐substituted by a branched or a linear side‐chain. The chemical structure of the copolymers and their precursors was confirmed by NMR and IR spectroscopies, and their molar masses were estimated by SEC. Thermal analysis under N₂ atmosphere showed no weight loss below 329°C, and no glass transition was observed in between 0 and 250°C. The band gaps of all PCBTs evaluated by optical spectroscopies and by cyclic voltammetry analysis were consistent with expectations and ranged between 2.2 and 2.3 eV. Finally, 2,7 and 3,6 linkages were shown to influence optical properties of PCBTs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2059–2068     

Indirect hydrogen analysis by gas chromatography coupled to mass spectrometry (GC–MS)

Gas chromatography (GC) is an analytical tool very useful to investigate the composition of gaseous mixtures. The different gases are separated by specific columns but, if hydrogen (H₂) is present in the sample, its detection can be performed by a thermal conductivity detector or a helium ionization detector. Indeed, coupled to GC, no other detector can perform this detection except the expensive atomic emission detector. Based on the detection and analysis of H₂ isotopes by low‐pressure chemical ionization mass spectrometry (MS), a new method for H₂ detection by GC coupled to MS with an electron ionization ion source and a quadrupole analyser is presented. The presence of H₂ in a gaseous mixture could easily be put in evidence by the monitoring of the molecular ion of the protonated carrier gas. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 3-methyl-7-[2-(dimethylaminoethyl)oximino]-5-arylcyclopenta [F] Benzoxazolinones,Potential Ligands of the 5HT1D Receptors

The synthesis of 3-methyl-7-[2-(dimethylaminoethyl)oximino]-5-arylcyclopenta [f] benzoxa-zolinones, potential ligands of the 5HT_1D receptors is described through a 4 steps reaction strategy from 3-methyl-6-acetyl benzoxazolinone.     

Supramolecular Complexes of Multivalent Cholesterol‐Containing Polymers to Solubilize Carbon Nanotubes in Apolar Organic Solvents

Copolymers of 2‐ethylhexyl acrylate (EHA) and cholesteryloxycarbonyl‐2‐hydroxymethacrylate (CEM) were prepared by reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Supramolecular complexes of these copolymers with carbon nanotubes (CNTs) were soluble in THF, toluene, and isooctane. The colloidal solutions remained stable for months without aggregation. The rationale for the choice of CEM was based on the high adsorption energy of cholesterol on the CNT surface, as computed by DFT calculations. Adsorption isotherms were experimentally measured for copolymers of various architectures (statistical, diblock, and star copolymers), thereby demonstrating that 2–5 cholesterol groups were adsorbed per polymer chain. Once the supramolecular complex had dried, the CNTs could be easily resolubilized in isooctane without the need for high‐power sonication and in the absence of added polymer. Analysis by atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) indicated that the CNTs were devoid of bundles. The supramolecular complexes could also be employed in an inverse emulsion polymerization of 2‐hydroxyethylmethacrylate (HEMA) in isooctane and dodecane, thereby leading to the formation of a continuous polymeric sheath around the CNTs. Thus, this technique leads to the formation of very stable dispersions in non‐polar organic solvents, without altering the fundamental properties of the CNTs.