Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Complexation of Ni (II) and Zn(II) ions by 3-(1-naphthyI)-2-mercaptopropenoic acid

The complexation equilibria between Ni(II) and Zn(II) metal ions with 3-(1-naphthyl)-2-mercaptopropenoic acid (H₂NMP) were studied by glass electrode potentiometry, at 25 °C and 1.0 mol·dm^–3 in NaClO₄ as constant ionic medium in 50% (v/v) water-ethanol solutions. Formation constants for the complexes Ni(NMP), Ni(NMP) ₂ ^2– , Zn(NMP) and Zn(NMP) ₂ ^2– , refined by the MINIGLASS program, are reported.     

DNase activity ofMicrococcal endonuclease insolubilized on corn cob

The endonuclease from S. aureus has been immobilized on ground maize cob, previously activated with tosyl chloride. Pretreatment of the support on acid before tosylation yielded the best insoluble enzyme derivatives. The catalytic activity has been evaluated as percent of total hydrolysis attained in a batch reactor using DNA as a model substrate. The derivatives prepared are very resistant to high temperatures under conditions of catalysis (24 h at 45 degrees C). For these long reaction times, the extent of hydrolysis in the presence of small amounts of organic solvent (dimethyl sulfoxide at 2 percent) is larger than in plain buffer (Tris). This type of derivative could be very useful for the removal of nucleic acids from single-cell protein concentrates.     

The crystal structure of eudesma-4(15),7(11)-dien-8α, 12-olide: a sesquiterpene lactone fromTrattinickia rhoifolia Willd

The title compound, formula C₁₅H₂₀O₂, is orthorhombic, P2₁2₁2₁ witha=8.747(2),b=12.025(3),c=12.554(3)Å,Z=4, andD _m =1.32(2)g/ml. The structural analysis shows that the compound corresponds to eudesma-4(15),7(11)-dien-8,12-olide, a sesquiterpene lactone previously isolated fromAster umbellatus but whose crystal structure was unknown.     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

Parallel and multiplexed bead-based assays and encoding strategies

Advances in high throughput screening (HTS), together with the rapid progress in combinatorial chemistry, genomic and proteomic sciences have dramatically stimulated the development of a variety tools to enable the drug discovery process to become more efficient. Major future challenges in HTS include obtaining high density and good quality data based on assays that are rapid, reliable, inexpensive, sensitive, simple and miniaturised. This paper reviews the development and role of bead-based assays for HTS including DNA and single nucleotide polymorphism (SNP) assays, particularly from a multiplex perspective and evaluating the recent advances in bead-based arrays. The encoding strategies that are commonly used in bead-based assays are highlighted, while the importance of magnetic beads in genomic and proteomic purifications is discussed. In conclusion, bead-based assays offer a powerful promising approach for many aspects of drug discovery.     

Molecular dynamics simulations of the surface tension of ionic liquids

We report molecular dynamics computer simulations of the surface tension and interfacial thickness of ionic liquid-vapor interfaces modeled with a soft core primitive model potential. We find that the surface tension shows an anomalous oscillatory behavior with interfacial area. This observation is discussed in terms of finite size effects introduced by the periodic boundary conditions employed in computer simulations. Otherwise we show that the thickness of the liquid-vapor interface increases with surface area as predicted by the capillary wave theory. Data on the surface tension of size-asymmetric ionic liquids are reported and compared with experimental data of molten salts. Our data suggest that the surface tensions of size-asymmetric ionic liquids do not follow a corresponding states law.