Polystyrene-bound diethanolamine based ionic liquids for chemical fixation of CO2

Polystyrene-bound diethanolamine based ionic liquids (PS-DHEEAB and PS-THEAB) were synthesized and applied for the chemical fixation of CO₂ into cyclic carbonates without any additional co-catalyst and solvent. The effect of the catalysts with different number of hydroxyl group in the cation of the IL on the reaction was systematically investigated. Highest activity and selectivity were achieved in the presence of polystyrene supported diethanolamine ethyl bromide (PS-DHEEAB) in comparison with other catalysts employed. The catalyst was tough in stability and also found to be extended to a variety of terminal epoxides and aziridines. The relationship between high catalytic reactivity and the –OH functional groups was proposed.     

Ultrafast Fluorescence Spectroscopy via Upconversion and Its Applications in Biophysics

In this review, the experimental set-up and functional characteristics of single-wavelength and broad-band femtosecond upconversion spectrophotofluorometers developed in our laboratory are described. We discuss applications of this technique to biophysical problems, such as ultrafast fluorescence quenching and solvation dynamics of tryptophan, peptides, proteins, reduced nicotinamide adenine dinucleotide (NADH), and nucleic acids. In the tryptophan dynamics field, especially for proteins, two types of solvation dynamics on different time scales have been well explored: ~1 ps for bulk water, and tens of picoseconds for “biological water”, a term that combines effects of water and macromolecule dynamics. In addition, some proteins also show quasi-static self-quenching (QSSQ) phenomena. Interestingly, in our more recent work, we also find that similar mixtures of quenching and solvation dynamics occur for the metabolic cofactor NADH. In this review, we add a brief overview of the emerging development of fluorescent RNA aptamers and their potential application to live cell imaging, while noting how ultrafast measurement may speed their optimization.     

Rational Design of Cyclometalated Iridium(III) Complexes for Three-Photon Phosphorescence Bioimaging

Compared to 2PE (two-photon excitation) microscopy, 3PE microscopy has superior spatial resolution, deeper tissue penetration, and less defocused interference. The design of suitable agents with a large Stokes shift, good three-photon absorption (3PA), subcellular targeting, and fluorescence lifetime imaging (FLIM) properties, is challenging. Now, two Ir^III complexes (3PAIr1 and 3PAIr2) were developed as efficient three-photon phosphorescence (3PP) agents. Calculations reveal that the introduction of a new group to the molecular scaffold confers a quadruple promotion in three-photon transition probability. Confocal and lifetime imaging of mitochondria using Ir^III complexes as 3PP agents is shown. The complexes exhibit low working concentration (50 nm ), fast uptake (5 min), and low threshold for three-photon excitation power (0.5 mW at 980 nm). The impressive tissue penetration depth (ca. 450 μm) allowed the 3D imaging and reconstruction of brain vasculature from a living specimen.     

Engineering the Charge-Transfer State to Facilitate Spin–Orbit Charge Transfer Intersystem Crossing in Spirobis[anthracene]diones

Spiro conjugation has been proposed to dictate the efficiency of charge transfer, which could directly affect the spin–orbit charge transfer intersystem crossing (SOCT-ISC) process. However, this process has yet to be exemplified. Herein, we prepared three spirobis[anthracene]diones, in which two benzophenone moieties are locked in close proximity and differentially functionalized to fine-tune the charge transfer state. Its feasibility for SOCT-ISC was theoretically predicted, then experimentally evaluated. Through fine-tuning the spiro conjugation coupling and varying the solvent dielectric constants, ISC rate constants were engineered to vary in a dynamic range of three orders of magnitude, from 7.8×10⁸ s⁻¹ to 1.0×10¹¹ s⁻¹, which is the highest ISC rate reported for SOCT-ISC system to our knowledge. Our findings substantiate the key factors for effective SOCT-ISC and offer a new avenue for the rational design of heavy atom free triplet sensitizers.     

高韧性合金钢断裂韧性及疲劳裂纹扩展门槛值的联合试验方法

在柴油机曲轴、连杆等关键零部件的可靠性设计和失效评估中,断裂韧性及疲劳裂纹扩展门槛值分别是衡量材料抵抗裂纹失稳扩展和裂纹开始扩展的重要指标．但是,对于高韧性合金材料,难以通过常规试验所推荐的厚度确定平面应变断裂韧性,而门槛值的测定通常不但非常耗时,且难以直接应用于不同循环特性的实际结构．本文针对高韧性合金钢34CrNi3MoA,提出一种将断裂韧性和疲劳裂纹扩展门槛值试验合二为一的试验方法,即用同一个试件可以同时测定门槛值和断裂韧性．利用断裂韧性关于试件厚度的渐近特性,以几种较薄试件的试验,确定平面应变状态下的断裂韧性．试验结果还表明,裂纹扩展门槛值的试件厚度依存性可以忽略,并给出了任意循环特性（应力比）下的门槛值计算公式．     

双材料应力分析中的镜像点方法

提出一种分析各类双材料中任一点受集中力作用问题的方法.通过将结合界面或其自由表面看作镜面,将应力函数或位移函数设定成固定于受载点及其镜像点上的局部坐标系下的形式,利用界面连续条件和Dirichlet的单值性原理,所有应力函数或位移函数就可由无限体中集中力的解或半无限体表面集中力的解的应力函数求得.这种方法不仅可适用于单一界面的情况,也可使用于多个界面并存的情况,并且也可适用于具有自由表面的结合材料.这一方法可应用于各类结合材料、涂层薄膜材料、板材等.     

Fabrication of silicon microwire arrays for?photovoltaic?applications

A?novel method of combining photolithography, wet chemical etching and oxidation process was proposed to fabricate large area of silicon microwire (SiMW) arrays. The dimensions of the SiMWs can be easily controlled by photomask and etching conditions. Solar cells based on the heterojunction between SiMW and double-walled carbon nanotubes (DWNTs) were constructed. The initial test on the DWNT/SiMW shows efficiency (??) of?0.59%. By adding a few drops of HBr/B₂ electrolyte, the efficiency was improved to 1.96% with J _sc=19.2?mA/cm² and V _oc=0.35?V, FF=29.2%, showing the potential of SiMWs in photovoltaic applications.     

精细积分法在电报方程求解中的应用

将精细积分法应用到了二维的电报方程的数值计算之中。实例计算表明，该方法具有简单、计算精度高、无条件稳定、不需要进行复杂、费时的频域一时域转换及卷积积分，直接时域分析，处理非零初始值容易等优点。与传统的ＦＦＴ法及ＮＩＬＴ法相比，其效率更高，功能更强。     

一类具有资源约束和优先加工顺序约束极小化加权总完工时间调度优化问题研究

本文针对工件间具有链状优先约束和relocation资源约束的极小化加权总完工时间调度优化问题展开研究.针对这一NP难问题,利用relocation约束的性质和贪婪算法的思想,设计了一个多项式近似算法,并证明了当链不可中断,每个链具有相同工件数和工件间具有相同加工时间时,2为该算法的紧界.