Fluorescent-based single-strand conformation polymorphism/heteroduplex capillary electrophoretic mutation analysis of the P53 gene.

Fluorescent-based single-strand conformation polymorphism (F-SSCP) analysis with capillary electrophoresis (CE) is the most common method for the detection of mutation because of its high sensitivity and resolution. In this study, we prepared an inexpensive linear polyacrylamide (LPA), and successfully applied it to CE-SSCP analysis and tandem CE-SSCP/heteroduplex analysis (HA) of the P53 gene on an ABI capillary genetic analyzer. A comparison of the sieving capabilities of a homemade LPA and commercial polydimethylacrylamide (PDMA) demonstrates that the homemade LPA has a higher resolution, a shorter analysis time, and is more suitable for tandem SSCP/HA than commercial PDMA. To show the usefulness, mutations of P53 gene exon 7 - 8 in 37 tumor samples were investigated by using homemade LPA. The results indicate that 10 mutations were found in 9 of 37 cases; the majority of P53 mutations were missense mutations, and 70% were located in exon 7, which plays an important role in neoplastic progression in human tumorigenesis.     

Applications of homemade kit in mutation detection of genes

With the accomplishment of Human Genome Project (HGP), single nucleotide polymorphism (SNP) and mutation detection in human genome are becom-ing a new researching focus. These researches can help us to understand the phenotype diversity of indi-vidual, disease susceptibility and drug resistance of different colonies. Traditional method used for muta-tion detection is slab gel electrophoresis, which re-mains labor-intensive and time-consuming because of the requirement of radioactivity or te…     

A bias-compensated fractional order normalized least mean square algorithm with noisy inputs

Numerical Algorithms - This paper comes up with a stable bias-compensated fractional order normalized least mean square (BC-FONLMS) algorithm with noisy inputs. This kind of bias-compensated...     

Atom Transfer Radical Polymerization of MMA Initiated by 2‐(4‐chloromethyl‐phenyl)‐benzoxazole and Fluorescent Property of PMMA

Atom transfer radical polymerization (ATRP) of MMA was conducted using 2‐(4‐chloromethyl‐phenyl)‐benzoxazole as initiator, CuCl as catalyst, and PMDETA as ligand. The results show that the polymerization is a first order reaction with respect to monomer concentration. The polymerization displayed living character as evidenced by a liner increase of monomer weight with conversation and a relatively narrow distribution (Mn/Mw range from 1.30 to 1.45). The structure of PMMA was analyzed by ¹H‐NMR and proved the polymerization could be controlled to some degree. The optical property of the initiator was well preserved in the resulting PMMA, and the end‐functionalized PMMA exhibited fluorescent emission at 360 nm whether in DMF solution or in film state.     

Preparation of Fluorescent Polystyrene via ATRP with Dimethylamino Chalcones as Initiator

4‐(3‐(4‐(Dimethylamino)phenyl)acryloyl)phenyl‐2‐bromo‐2‐methylpropanoate (APPBr) was used for the heterogeneous atom transfer radical polymerization (ATRP) of styrene (St) with copper(I) bromide/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA) catalytic system. The functional end group was characterized via UV‐Vis and ¹H NMR spectra. The polymerization showed a first‐order kinetic characteristic and each of the obtained polymers had well‐controlled molecular weight and relatively low polydispersity index (PDI). Furthermore, the obtained end‐functionalized polystyrene (PS) in solution showed strong green‐light emission which is further affected by mixing different metal cations. In particular, the fluorescent intensity of the polymer was decreased in the presence of Ag⁺, Cu²⁺ and Fe³⁺.     

Validation of a Reference Gene (BdFIM) for Quantifying Transgene Copy Numbers in Brachypodium distachyon by Real-Time PCR

Brachypodium distachyon has been proposed as a new model system for gramineous plants with a sequenced genome and an efficient transformation system. Many transgenic B. distachyon plants have been generated in recent years. To develop a reliable fast method for detecting transgenic B. distachyon and quantifying its transgene copy numbers, a species-specific reference gene is of great priority to be validated both in qualitative PCR and quantitative real-time PCR detection. In this study, we first proved that the BdFIM (B. distachyon fimbrin-like protein) gene is a suitable reference gene in qualitative PCR and quantitative real-time PCR for B. distachyon. Fourteen different B. distachyon varieties were tested by both qualitative and quantitative PCRs, and identical amplification products of BdFIM were obtained with all of them, while no amplification products were observed with samples from 14 other plant species, suggesting that BdFIM gene was specific to B. distachyon. The results of Southern blot analysis revealed that the BdFIM gene was low copy number in seven tested B. distachyon varieties. In conclusion, the BdFIM gene can be used as a reference gene, since it had species specificity, low heterogeneity, and low copy number among the tested B. distachyon varieties. Furthermore, the copy number of inserted sequences from transgenic B. distachyon obtained by real-time PCR methods and Southern blot confirmed that the BdFIM gene was an applicable reference gene in B. distachyon.     

Flash memory effects based on styrene/maleimiade copolymers with pendant azobenzene chromophores

Two styrene/maleimiade copolymers with pendant azobenzene chromophores, poly(styrene-1-(4-phenylazo-phenyl)-pyrrole-2,5-dione) (PS-DP) and poly((4-vinyl-benzyl)-9H-carbazole-1-(4-phenylazo-phenyl)-pyrrole-2,5-dione) (PVCz-DP), were synthesized. The polymeric memory devices based on each of the two polymer films (ITO/Polymer/Al) show similar rewritable flash memory behaviors but different transition voltages. By introduction of carbazole groups in the polymer side chains, the voltage difference from OFF to ON state of ITO/PVCz-DP/Al is reduced obviously in comparison with that of ITO/PS-DP/Al, which is beneficial to the protection of devices. Both ITO/PS-DP/Al and ITO/PVCz-DP/Al show high stability under a constant stress or continuous read pulses voltage of 1.0 V. The memory mechanism is governed by space-charge limited conduction (SCLC) on the basis of the I–V curves of these fabricated memory devices. With excellent flash memory characteristics and simple processability, the memory devices fabricated with these two styrene/maleimiade copolymers have potential applications for the future electronic memory devices.     

HPLC-AFS联用测定海产品中砷的形态

建立了高效液相色谱-原子荧光分光光度法测定海产品中无机砷(As V,AsⅢ)、有机砷(DMA,MMA,AsB)含量的方法.样品经含10％(体积分数)HC1的提取液振荡提取、离心分离、二路形态分析预处理、高效液相色谱分离,用原子荧光光度计检测As(Ⅲ),DMA,MMA,As(v);四路条件(过氧化氢氧化和开启紫外灯)形态分析预处理装置处理,高效液相色谱分离,原子荧光光度计测定AsB.As(Ⅲ)线性范围为0～100.00 μg/L,r2=0.9997;DMA线性范围为0～100.00 μg/L,r2=0.9993;MMA线性范围为0～100.00 μg/L,r2=0.9990;As(Ⅴ)线性范围为0～100.00 μg/L,r2=0.999 1;AsB线性范围为0～200.00 μg/L,,r2=0.9994.3个样品加标回收率为As(Ⅲ)86.7％～89.4％,DMA 111.2％～117.0％,MMA 109.7％～111.6％,As(Ⅴ) 83.8％～90.7％,AsB 88.3％～90.4％.用该方法测定虾仁(干)5个价态测定结果的相对标准偏差为3.07％～9.93％(n=6).5个价态的检出限(S/N=2)为As(Ⅲ)0.29 μg/L,DMA 0.36 μg/L,MMA 0.27 μg/L,As(V) 0.56 μg/L,AsB l.46 μg/L.该方法适用于海产品中As(Ⅲ),DMA,MMA,As(V),AsB含量的测定.     

Narrowband blue emission with insensitivity to the doping concentration from an oxygen-bridged triarylboron-based TADF emitter: nondoped OLEDs with a high external quantum efficiency up to 21.4%

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve narrowband emission and high efficiency in nondoped organic light-emitting diodes (OLEDs) remain a big challenge. Herein, we successfully design and synthesize two blue TADF emitters by directly incorporating carbazole fragments into an oxygen-bridged triarylboron acceptor. Depending on the linking mode, the two emitters show significantly different photophysical properties. Benefitting from the bulky steric hindrance between the acceptor and terminal pendants, the blue emitter TDBA-Cz exhibited a high photoluminescence quantum yield (PLQY) of 88% in neat films and narrowband emission. The corresponding non-doped blue device exhibited a maximum external quantum efficiency (EQE) of 21.4%, with a full width at half maximum (FWHM) of only 45 nm. This compound is the first blue TADF emitter that can concurrently achieve narrow bandwidth and high electroluminescence (EL) efficiency in nondoped blue TADF-OLEDs.

A donor–acceptor TADF emitter showed narrowband high-efficiency blue emission by fine molecular modulation. The corresponding OLEDs exhibited a maximum EQE of 21.4% and a small FWHM of 45 nm, representing the most efficient nondoped blue TADF-OLEDs.     

Rapid detection of pesticide residues in Chinese herbal medicines by molecularly imprinted membrane electrospray ionization mass spectrometry

Chinese herbal medicines(CHMs) play an increasingly important role in the field of medicine and affects public health in the world.Although more and more strict has been employed to ensure the quality and safety of CHMs,pesticide residues in CHMs remain a serious issue and are the bottleneck for the global development of CHMs.In this work,we applied molecularly imprinted membrane electrospray mass spectrometry(MIM-ESI MS) for rapid detecting 4 classes of pesticide residues in CHMs,including organophosphorus(OPP),carbamates,pyrethroids and neonicotinoids in CHMs.Compared with our previous ambient ionization method MESI,MIM-ESI is capable of achieving a ～50-fold increase in the detection limit of conventional analytical methods owing to the specificity recognition and unique enrichment of MIM.The optimal experimental conditions were determined,and the method was further validated for its sensitivity and specificity.Our data showed that MIM-ESI MS is applicable for the direct quantitation of pesticide residues in CHMs.This detection technology may help to ensure the quality of CHMs in the future.