Parallel processing of remotely sensed data: Application to the ATSR-2 instrument

Massively parallel computational paradigms can mitigate many issues associated with the analysis of large and complex remotely sensed data sets. Recently, the Beowulf cluster has emerged as the most attractive, massively parallel architecture due to its low cost and high performance. Whereas most Beowulf designs have emphasized numerical modeling applications, the Parallel Image Processing Environment (PIPE) specifically addresses the unique requirements of remote sensing applications. Automated, parallelization of user-defined analyses is fully supported. A neural network application, applied to Along Track Scanning Radiometer-2 (ATSR-2) data shows the advantages and performance characteristics of PIPE.     

Reactions of Diethyl [(3-Bromomethyl-2-Thienyl)-Methylene]Propanedioate with Hydrazines: Syntheses of Dihydropyridazines,Pyridazines and O-Dimethylaminomethylarenecarbonitriles

Facile syntheses of dihydropyridazines, pyridazines, and o-dimethylaminomethylarenecarbonitriles have been achieved by the retro-malonate addition reaction. Bromoalkylidenemalonates 1,7, and 10 were treated with hydrazine to give dihydropyridazines 4, 8, and 11 in quantitative yields. DDQ or air oxidation of 4, 8, and 11 gave pyridazines 5, 9, and 12, Alternatively, treatment of 1, 7, and 10 with 1,1-dimethylhydrazine afforded o-dimethylaminomethylarenecarbonitriles 6,13, and 14 in good yields.     

Remarks on the exoticU-meson

In expectation of imminent result from the new hyperon beam experiment at CERN concerning the exoticU-meson at 3.1 GeV, we propose a detailed program of experimental tests to check the suggestion thatU is a \(qq\bar q\bar q\) “M-diquonium” state. Apart from some very characteristic decay modes, theU is expected to occur together with several analogous states with various quantum numbers to which it is intimately related.     

Simultaneous determination of ampicillin, cefoperazone, and sulbactam in pharmaceutical formulations by HPLC with beta-cyclodextrin stationary phase

An accurate and reproducible method for the simultaneous determination of ampicillin (AMP), sulbactam (SUL), and cefoperazone (CFP) in pharmaceutical formulations by using HPLC with beta-CD stationary phase was developed. It involved the use of the added tetraethylammonium acetate (TEAA) reagent, pH, and methanol as the significant parameters to find the optimum separation condition. A high resolution and selectivity of analytes was obtained by running the mobile phase in methanol-5 mM TEAA buffer = 35:65 (v/v, pH 4.5) at 280 nm. The mean recoveries ranged from 96.6 to 103.3% for AMP in the synthetic mixture, 97.6 to 103.0% for SUL, and 97.0 to 104.0% for CFP. The low LOD (<1.8 microg/mL) and low CV (<0.9%) assured that this method was sensitive and reproducible. The assay of analytes in commercial products exhibited that it was convenient and reproducible for routine analyses of these components in sterilized H(2)O, saline, or 5% dextrose injection solutions.     

A Flexible Photoactive Titanium Metal–Organic Framework Based on a [TiIV3(μ3‐O)(O)2(COO)6] Cluster

The synthesis of titanium–carboxylate metal–organic frameworks (MOFs) is hampered by the high reactivity of the commonly employed alkoxide precursors. Herein, we present an innovative approach to titanium‐based MOFs by the use of titanocene dichloride to synthesize COK‐69, the first breathing Ti MOF, which is built up from trans‐1,4‐cyclohexanedicarboxylate linkers and an unprecedented [Ti^IV₃(μ₃‐O)(O)₂(COO)₆] cluster. The photoactive properties of COK‐69 were investigated in depth by proton‐coupled electron‐transfer experiments, which revealed that up to one Ti^IV center per cluster can be photoreduced to Ti^III while preserving the structural integrity of the framework. The electronic structure of COK‐69 was determined by molecular modeling, and a band gap of 3.77 eV was found.     

A novel yellow emitting phosphor Dy3+, Bi3+ co-doped YVO4 potentially for white light emitting diodes

Novel Y1 x yVO4:xDy3+,yBi3+(0.01 ≤ x ≤ 0.05,0 ≤ y ≤ 0.20) phosphors for light emitting diode(LED) were successfully synthesised by solid-state reaction.The calculation results of electronic structure show that YVO4 has a direct band gap with 3 eV at G.The top of the valence band is dominated by O 2p state and the bottom of the conduction band is mainly composed of O 2p and V 3d states.An efficient yellow emission under near-ultraviolet(365 nm) excitation is observed.Compared with the pure YVO4:Dy3+ samples,the Dy3+,Bi3+ co-doped samples show a more intensive emission peak(at 574 nm) and a new broad emission band(450-770 nm),due to the 4F9/2 6H13/2 transition of Dy3+ and the emission of the VO3 4 Bi3+ complex respectively.The optimum chromaticity index of Y1 x yVO4:xDy3+,yBi3+(0.01 ≤ x ≤ 0.05,0 ≤ y ≤ 0.20) is(0.447,0.497),which indicates that YVO4:Dy3+,Bi3+ has higher colour saturation than the commercial phosphor YAG:Ce3+.The effects of concentration of Dy3+,Bi3+,electric states and the photoluminescence properties are discussed in details.     

Hydrothermal Synthesis and Vacuum Ultraviolet-Excited Luminescence Properties of Novel Dy^3＋-doped GdPO4 White Light Phosphors

Novel Dy^3＋-doped GdPO4 white light phosphors with a monoclinic system are successfully synthesized by the hydrothermal method at 240℃. The strong absorption at around 147nm in the excitation spectrum is assigned to the host absorption. It is suggested that the vacuum ultraviolet excited energy is transferred from the host to the Dy^3＋ ions. The f - d transition of the Dy^3＋ ion is observed to be located at 182nm, which is consistent with the calculated value using Dorenbos＇s expression. Under 147nm excitation, Gd0.92PO4：0.08Dy^3＋ phosphor exhibits two emission bands located at 572 nm （yellow） and 478 nm （blue）, which correspond to the hypersensitive transitions ^4 F9/2-^6 H13/2 and ^4 F9/2-^6 H15/2. The two emission bands lead to the white light. Because of the strong absorption at about 147nm, Gd0.92PO4：0.08Dy^3＋ under vacuum ultraviolet excitation is an effective white light phosphor, and has promising applications to mercury-free lamps.     

节能灯用BaMgAl10O17:Eu2+,Mn2+荧光粉的劣化机理研究

对节能灯用BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺荧光粉的热劣化和紫外辐照劣化机理进行了对比研究. 发现热处理和紫外辐照处理均对BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺产生明显的发光劣化作用. 研究结果表明：热劣化主要涉及到Eu²⁺ 的氧化及其格位偏移, 而紫外辐照劣化与上述过程无关. 紫外辐照劣化主要源自高能紫外辐照使Eu²⁺ 处于更加不稳定的状态, 从而降低Eu²⁺ 的直接吸收和发射强度.     

An efficient preparation of vinamidinium hexafluorophosphate salts

Substituted acetic acids or acetyl chlorides react with phosphorus oxychloride in DMF to yield the vinamidinium salts 3a-j in moderate to excellent recrystallized yields (28-90%). The cations are conveniently isolated as their hexafluorophosphate salts, which are easily handled nonhygroscopic solids. The nitro compound 3l is prepared in 91% yield by nitration of the parent vinamidinium 3k. The X-ray crystal structure is reported for the 2-phenyl isomer 3e and displays minimal overlap of the two pi-systems.