Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Symmetric Markov chains in ℤd: How fast can they move?

Summary Consider a reversible Markov chain X _n which takes values in a subset of ^d. If the steps of the chain are uniformly bounded and the invariant measure satisfies a mild regularity condition, Varopoulos, Carne and Kesten have obtained estimates on \lambda n^{1/2} )$$ " align="middle" border="0"> which exhibit a Gaussian tail in but blow up as n. Following Kesten's approach we derive bounds which are uniform in n in some special cases. Our main result, however, is an example which shows that in general the estimates of Varopoulos, Carne and Kesten are essentially best possible.Research partially supported by an S.E.R.C. (U.K.) visiting fellowship and an operating grant from N.S.E.R.C. of Canada     

Strong, low-energy two-photon absorption in extended amine-terminated cyano-substituted phenylenevinylene oligomers

Three quadrupolar oligophenylenevinylenes with five rings in the conjugated backbone, terminal donor groups, and various acceptors and/or donors along the backbone were synthesized and their two-photon spectroscopic properties investigated. These chromophores exhibit large two-photon absorption cross sections over a wide wavelength range and two distinct peaks, the strongest of which (deltamax > 3600 GM) is observed at 960-970 nm, a wavelength close to twice the value of the linear absorption maximum (2lambda(1)max). The findings on these chromophores are compared with those for analogous molecules with shorter conjugation length, for which the main two-photon band is at significantly shorter wavelength than 2lambda(1)max.     

Preparation of polymer colloids by chemical reactions in aerosols. I. Poly(p-tertiarybutylstyrene)

A procedure was developed by which polymer colloids can be prepared by polymerizing aerosol droplets of monomers with an initiator in the vapor state. This work describes the formation of poly(p-tertiarybutylstyrene) particles by exposing the corresponding monomer droplets to trifluoromethanesulfonic acid. It was found that the monomer-to-initiator mass ratio is the critical factor in determining the uniformity and morphology of the particles. Under ideal conditions spheres of narrow size distribution are obtained. Otherwise porous particles or soft particles with whiskers may develop. The aerosol was prepared in a falling film generator, but other procedures for producing monomer droplets may be used.     

Aerobic alcohol oxidation catalyzed by a new, oxygen-bridged heterometallic compound [PPh4][Ru(N)Me2(μ2-O)2Pd((−)-sparteine)]

The reaction between the new hydroxy compound [PPh₄][Ru(N)(OH)₂Me₂] and Pd(OSiMe₃)₂((−)-sparteine) produces (Me₃Si)₂O, H₂O and a new heterobimetallic compound [PPh₄][Ru(N)Me₂(μ₂-O)₂Pd((−)-sparteine)] in good yield. The Ru/Pd bimetallic compound catalyzes the oxidation of aryl and allyl alcohols to the corresponding carbonyl compound in air and the rearrangement of allylic alcohols unsaturated aldehydes. It also oxidizes PPh₃ to O-PPh₃ under O₂.     

The equilibrium properties and folding kinetics of an all-atom Go model of the Trp-cage

The ultrafast-folding 20-residue Trp-cage protein is quickly becoming a new benchmark for molecular dynamics studies. Already several all-atom simulations have probed its equilibrium and kinetic properties. In this work an all-atom Go model is used to accurately represent the side-chain packing and native atomic contacts of the Trp-cage. The model reproduces the hallmark thermodynamics cooperativity of small proteins. Folding simulations observe that in the fast-folding dominant pathway, partial alpha-helical structure forms before hydrophobic core collapse. In the slow-folding secondary pathway, partial core collapse occurs before helical structure. The slow-folding rate of the secondary pathway is attributed to the loss of side-chain rotational freedom, due to the early core collapse, which impedes the helix formation. A major finding is the observation of a low-temperature kinetic intermediate stabilized by a salt bridge between residues Asp-9 and Arg-16. Similar observations [R. Zhou, Proc. Natl. Acad. Sci. U.S.A. 100, 13280 (2003)] were reported in a recent study using an all-atom model of the Trp-cage in explicit water, in which the salt-bridge stabilized intermediate was hypothesized to be the origin of the ultrafast-folding mechanism. A theoretical mutation that eliminates the Asp-9-Arg-16 salt bridge, but leaves the residues intact, is performed. Folding simulations of the mutant Trp-cage observe a two-state free-energy landscape with no kinetic intermediate and a significant decrease in the folding rate, in support of the hypothesis.     

The remarkable ability of lithium ion to reverse the stereoselectivity in the conjugate addition of Li[BuCuI] to a chiral N-crotonyl-2-oxazolidinone

[reaction: see text] The influence of lithium ions on the conjugate addition of the monoorganocuprate reagent, Li[BuCuI], to a chiral crotonate has been investigated. The results show that iodotrimethylsilane (TMSI) is crucial for the asymmetric conjugate addition of the copper reagent, but only in THF or when 12-crown-4 is used. The reaction is thought not to involve any halosilane in any critical steps in the organocopper mechanisms conducted in Et(2)O.     

Synthesis of some dibenzodiazepinone derivatives as potent and m2-selective antimuscarinic compounds

Two series of 5-[[4-[4-(dialkylamino)butyl]-l-cyclohexyl]acetyl], and 5-[(dialkylamino)acyl]-10,11-dihydro-5H- dibenzo[b,e][1,4]diazepin-11-ones were synthesized as potential m2-selective ligands 1,2. Their affinity and selectivity for the muscarinic cholinergic receptor m-AChR subtypes were determined. Replacing a nitrogen with CH in the piperidine ring of 5-[[4-[4-(dialkylamino)butyl]-l-piperidinyl]acetyl]-10,11-dihydro-5H-dibenzo-[b,e][1,4]diazepin-11-ones 3 significantly altered the affinity and selectivity to the muscarinic receptor subtypes.