Characterization of sulfate-reducing bacteria in yeast industry waste by microcalorimetry and PCR amplification

Sulfate-reducing bacteria (SRB) were isolated from anaerobic sludge of yeast factory wastewater treatment plant by cultivation on Postgate C medium. Microcalorimetry was used to monitor the anaerobic digestion processes and to measure the growth rates of sulfate-reducing bacteria. The maximum growth rates determined by microcalorimetry and ATP analysis were different—μ_max(dQ/dt) = 0.165 ± 0.008 h⁻¹ and μ_max(N_ATP) = 0.207 ± 0.013 h⁻¹. Experiments on the cultivation of SRB from yeast industry wastewater treatment plant in batch culture showed that during the first 20 h the concentration of sulfate decreased from 78.3 mM down to 62.2 mM while the increase of sulfide production was negligible. Perceptible amount of sulfide (7.82 mM) appeared on the 33.5 h of fermentation together with a peak on the power–time curve and considerable increase in the cell count (1.26 × 10⁹). First steps of sulfate metabolism (activation of sulfate by ATP sulfurylase, production of H₂) are accompanied by endothermic heat effects, therefore the values of thermal power remain moderate until the evolution of sulfide starts. The influence of green microalgae Chlorococcum sp. (preparation Biotreat 100) on the growth characteristics of microorganisms was also studied. Identification of one SRB strain was started by sequencing of PCR-amplified 16S rRNA gene. Two sets of primers were used for PCR amplification, both specific for domain Bacteria but giving different gene fragments. PCR-products were purified with JETQUICK kit according to the manufacturer instructions.     

Planar Chromatography of Some 1-Arylpiperazines Behaving as Dopaminergic Ligands

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of fourteen 1-arylpiperazine derivatives has been studied by thin-layer chromatography on both silica...     

Parameter determination of a thermal desorption model

A new method for the analysis of thermal desorption spectra is presented, based on the experimental peak maximum functions for temperatureT _m(β) and pressureP _m(β) and a rigorous mathematical treatment. The resonant heating rate β_r is determined, satisfyingT _m(β_r)=T _r, whereT _r is the resonant temperature defined byA exp(−E _d/(RT _r))=1. Desorption energyE _d and frequency factorA can be determined simultaneously with relatively high robustness towards statistical experimental errors as demonstrated by computer-simulated thermal desorption spectra.     

Influence of the activation temperature on structural and textural properties of NiMo/Al2O3 hydrodesulfurization catalysts

Investigations of a commercial NiMo/Al₂O₃ hydrodesulfurization (HDS) catalyst are directed towards optimization of the activation procedure of HDS catalyst concerning active phase formation and thermal stability. Structural and textural data obtained with XRD, IR-FTIR, XPS and LTNA reveal that the optimal temperature for the formation of active species on the catalyst surface and an appropriate pore structure is 300°C.     

Electron Probe Microanalysis of HfO2 Thin Films on Conductive and Insulating Substrates

Quantitative electron probe microanalysis of highly insulating materials is a complicated problem, partially solved by coating samples with grounded thin conductive layers or using novel scanning electron microscopy (SEM) techniques, such as low-voltage and/or variable pressure SEM. In this work, some problems of quantitative X-ray microanalysis of thin HfO₂ films, in particular the possibility to determine mass thickness correlated to the density of the layer material, are discussed. For comparison, Al₂O₃, Ta₂O₅ and TiO₂ films grown onto both semiconductive Si and insulating quartz substrates were also analysed. All the films studied were synthesized by atomic layer deposition method.     

Early reactions of light-induced protochlorophyllide and chlorophyllide transformations analyzed in vivo at room temperature with a diode array spectrofluorometer

The steps of protochlorophyllide (Pchlide) photoreduction and subsequent chlorophyllide (Chlide) transformations which occur in the seconds to minutes time-scale were studied using a diode array spectrofluorometer in dark-grown barley leaves. The intensity of the excitation light was varied between 3 and 2,500 micromol m(-2) s(-1) and a series of fluorescence spectra were recorded at room temperature in the seconds and minutes time scales. In certain experiments, 77-K emission spectra were measured with the same equipment. The high quality of the spectra allowed us to run spectral resolution studies which proved the occurrence, at room temperature, of multiple Pchlide and Chlide forms found previously in 77-K spectra. The comparison of the 77-K and room-temperature spectra showed that the fluorescence yields of the nonphotoactive 633-nm Pchlide form and of the Chlide product emitting at 678 nm were temperature independent. The fluorescence intensity of aggregated NADPH-pigment-POR complexes (photoactive 656-nm Pchlide and 693-nm Chlide forms) were strongly increased at 77 K, while that of the NADP(+)-Chlide-POR (684-686-nm Chlide form) was much less affected by temperature. Information was obtained also about the dynamics of the transformation of pigment forms in the light at different photon densities. At low light intensities, the phototransformation of the 642-644-nm Pchlide form was faster than that of the 654-656-nm form. The relative amplitudes of Gaussian components related to different Chlide forms found after exposure to a constant amount of photons strongly depended on the light intensity used. Strong quenching of all Chlide components occurred upon prolonged exposure to high intensity light. These effects are discussed by considering the interconversion processes between different forms of the pigment-protein complexes, their relative fluorescence yields and energy migration processes.     

Microwave-assisted "libraries from libraries" approach toward the synthesis of allyl- and C-cyclopropylalkylamides

Cascade reactions of internal and terminal alkynes, zirconocene hydrochloride, dimethylzinc, and phosphinoyl imines (prepared in one step from aldehydes and diphenylphosphinoyl amide) lead to allylic phosphinoyl amides after aqueous workup. Microwave acceleration allows the completion of this one-pot reaction sequence in 10 min. These allylic amides can be converted into a variety of derivatives, including carbamates and sulfonamides, or reacted prior to workup with diiodomethane to give novel C-cyclopropylalkylamides. A solution-phase "libraries from libraries" approach was used to generate an intermediate 20-member library which was subsequently expanded to a 100-member library by a series of N-functionalizations. The biological activity was evaluated in an assay for competitive binding to the estrogen receptor (ERalpha), revealing three potent lead compounds of a new structural type.