Extractive spectrophotometric determination of Cobalt(II) in synthetic and pharmaceutical samples using Cyanex 923.

Cyanex 923 has been proposed as a sensitive analytical reagent for the direct extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a blue-colored complex with Cyanex 923 in the organic phase. The maximum absorbance of the complex is measured at 635 nm. Beer's law was obeyed in the range 58.9 - 589.0 microg of cobalt. The molar absorptivitiy and Sandell's sensitivity of the complex was calculated to be 6.79 x 10920 l mol(-1) cm(-1) and 0.088 microg cm(-2), respectively. The nature of the extracted species was found to be Co(SCN)2 x 2S. An excellent linearity with a correlation coefficient value of 0.999 was obtained for the Co(II)-Cyanex 923 complex. Stability and regeneration of the reagent (Cyanex 923) for reuse is the main advantage of the present method. The method was successfully applied to the determination of cobalt in synthetic mixtures and pharmaceutical samples was found to give values close to the actual ones. Standard alloy samples, such as high-speed tool BCS 484 and 485, have been tested for the determination of cobalt for the purpose of validating the present method. The results of the proposed method are comparable with atomic absorption spectrometry and were found to be in good agreement.     

Kinetics of proton transfer in a green fluorescent protein: A laser-induced pH jump study

The sub-millisecond protonation dynamics of the chromophore in S65T mutant form of the green fluorescent protein (GFP) was tracked after a rapid pH jump following laser-induced proton release from the caged photolabile compoundo-nitrobenzaldehyde. Following a jump in pH from 8 to 5 (which is achieved within 2 μs), the fluorescence of S65T GFP decreased as a single exponential with a time constant of ∼90 μs. This decay is interpreted as the conversion of the deprotonated fluorescent GFP chromophore to a protonated non-fluorescent species. The protonation kinetics showed dependence on the bulk viscosity of the solvent, and therefore implicates bulk solvent-controlled protein dynamics in the protonation process. The protonation is proposed to be a sequential process involving two steps: (a) proton transfer from solvent to the chromophore, and (b) internal structural rearrangements to stabilize a protonated chromophore. The possible implications of these observations to protein dynamics in general is discussed     

Cooperative Strategies for Solving the Bicriteria Sparse Multiple Knapsack Problem

For hard optimization problems, it is difficult to design heuristic algorithms which exhibit uniformly superior performance for all problem instances. As a result it becomes necessary to tailor the algorithms based on the problem instance. In this paper, we introduce the use of a cooperative problem solving team of heuristics that evolves algorithms for a given problem instance. The efficacy of this method is examined by solving six difficult instances of a bicriteria sparse multiple knapsack problem. Results indicate that such tailored algorithms uniformly improve solutions as compared to using predesigned heuristic algorithms.     

Molecular simulation study of effect of molecular association on vapor-liquid interfacial properties

Vapor-liquid interfacial properties of square-well associating fluids are studied via transition-matrix Monte Carlo simulation. Results for one-site and two-site association models are presented. Coexistence properties, surface tension, cluster distribution, density profile, and orientation profile are presented. Molecular association affects the interfacial properties and cluster fractions more than it affects the bulk densities. We observe that the surface tension exhibits a maximum with respect to association strength. This behavior is in agreement with the recent study of Peery and Evans for one site system using a square-gradient approach.     

Molecular simulation study of the effect of pressure on the vapor-liquid interface of the square-well fluid

We examine a model system to study the effect of pressure on the surface tension of a vapor-liquid interface. The system is a two-component mixture of spheres interacting with the square-well (A-A) and hard-sphere (B-B) potentials and with unlike (A-B) interactions ranging (for different cases) from hard sphere to strongly attractive square well. The bulk-phase and interfacial properties are measured by molecular dynamics simulation for coexisting vapor-liquid phases for various mixture compositions, pressures, and temperatures. The variation of the surface tension with pressure compares well to values given by surface-excess formulas derived from thermodynamic considerations. We find that surface tension increases with pressure only for the case of an inert solute (hard-sphere A-B interactions) and that the presence of A-B attractions strongly promotes a decrease of surface tension with pressure. An examination of density and composition profiles is made to explain these effects in terms of surface-adsorption arguments.     

Thermoanalytical properties of monobasic nitrilotriacetate salts of alkaline earth metals and zinc

Monobasic metal nitrilotriacetate hydrated salts, MH[N(CH₂COO)₃].xH₂O, have been prepared by the reaction of nitrilotriacetic acid with metal carbonate. DTA studies of these salts both in N₂ and air reveal that these salts initially undergo dehydration and then, through acetate intermediates, decompose to oxycarbonates or oxides.     

Effectiveness of radiation processing in elimination of Campylobacter from poultry meat

Campylobacter, a common poultry intestine commensal, is a well known cause of human gastric illnesses across the globe. Consumption of contaminated poultry meat is a major cause of Campylobacter related infections. In the present study, radiation sensitivity of indigenous strains of C. jejuni and C. coli isolated from poultry was evaluated. The decimal reduction dose (D₁₀) values of different Campylobacter isolates at 0-4 °C in saline and blood broth were in the range of 0.120-0.210 kGy and 0.170-0.234 kGy, respectively. D₁₀ values in chicken meat homogenate for Campylobacter were in the range of 0.110-0.190 kGy. Chicken meat samples were inoculated with C. jejuni and exposed to gamma radiation to study the effectiveness of radiation treatment in elimination of Campylobacter. Radiation treatment with a dose of 1 kGy could achieve complete elimination of 10⁵ CFU of Campylobacter/g in poultry meat samples. No recovery of Campylobacter was observed, even after enrichment and selective plating in 1 kGy treated chicken meat samples stored at 4 °C up to 7 days. Present study shows that irradiation of poultry meat with 1 kGy can ensure safety of poultry meat.     

Patterning Flexible Substrates Using Surface Relief Structures in Azobenzene Functionalized Polymer Films

A novel method for maskless micro-patterning of polymeric substrates is presented. First, an azobenzene functionalized polymer film is spin-coated on a Poly (ethylene terephthalate) (PET) sheet. Then surface relief structures are optically inscribed on the polymer film by interference of laser beams. The patterned azobenzene functionalized film is then etched in the plasma chamber such that the gratings are transferred to the PET substrate. Finally, any remaining azobenzene functionalized polymer is dissolved away using an appropriate solvent. This method of patterning can be broadly applied to a variety of flexible/polymeric substrates and the resolution is not limited by the substrate thermo-mechanical properties.     

Synthesis and Characterization of a Thiophene Copolymer for Photovoltaic Application

A soluble thiophene copolymer having polar and non polar side groups was synthesized and its photovoltaics performance was investigated. The synthesized copolymer was characterized using Nuclear Magnetic Resonance (NMR) and optical spectroscopy. Dye sensitized solar cells were fabricated using this copolymer as sensitizer. An open-circuit voltage of 0.50V, a short-circuit current density of 1.195 mA/cm² and an overall power conversion efficiency of 0.3% were measured.