Stable all-optical formation of Bose–Einstein condensate using pointing-stabilized optical trapping beams

By stabilizing the beam pointing of optical trapping beams, we have succeeded in stable formation of Bose–Einstein condensate (BEC) of ⁸⁷Rb with all-optical method. The thermal effect of acousto-optic modulator (AOM) is usually one of the most serious problems to induce beam-pointing instability, especially for high power CO₂ laser. By passing the beam through AOM twice, we have improved the beam pointing from about 4.8 mrad to less than 0.4 mrad, which has been experimentally confirmed to be small enough to stably form BEC at the crossed region of CO₂ lasers as well as to perform experiments using an optical lattice which might have been affected by beam-pointing instability. PACS 32.80.Pj; 42.79.Jq; 03.75.Mn     

Identification of Al(III) species in a solution containing equimolar concentrations of Al(III) and citric acid using varying-temperature 27Al NMR spectrometry.

27Al NMR spectra of an equimolar (10 mM) Al(III)-citrate system were obtained at different temperatures. The linewidths of the signals decreased in the spectra recorded at elevated temperatures, which enabled us to unequivocally identify the resonance lines. From the spectrum recorded at 65 approximately C, a mononuclear Al(III)-citrate complex was identified at a solution pH of 3.0 in addition to trinuclear Al(III)-citrate complex, which dominated at pH 4.0.     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Effects of various thiol molecules added on morphology of dendrimer-gold nanocomposites

Interactions between poly(amidoamine) dendrimer (PAMAM)-gold nanocomposites and alkanethiols and between the former nanocomposites and thiol-modified poly(amidoamine) dendrons in ethyl acetate were investigated by adding alkanethiols, such as 1-propanethiol and 1,3-propanedithiol, and thiol-modified poly(amidoamine) dendrons, generations 0.5 and 2.5 (G0.5-SH and G2.5-SH). The PAMAM dendrimers with surface methyl ester groups used were generations 1.5 and 5.5 (G1.5 and G5.5). The mean particle sizes of PAMAM-gold nanocomposites were about 2.1 for G1.5 and 2.4 nm for G5.5. In both nanocomposite systems where 1-propanethiol and 1,3-propanedithiol were added, the mean particle size was about 4 nm, twice that of the systems where these thiols were not added. Increasing the addition of 1,3-propanedithiol made the average particle size smaller for both nanocomposites systems. To compare with alkanethiol, thiol-modified poly(amidoamine) dendron with a highly branched structure on one side was synthesized. Using G2.5-SH as a protective agent, dendron-gold nanocomposites with mean diameters of 3 to 4 nm were obtained. The difference in particle size was seen only when the combination of PAMAM-gold nanocomposites and thiol-modified dendron was less sterically dense, modified dendron (G0.5-SH). The mechanisms for morphology changes in the dendrimer-gold nanocomposites by the addition of these thiols are discussed.     

FLAVIN-PHOTOSENSITIZED MONOMERIZATION OF DIMETHYLTHYMINE CYCLOBUTANE DIMER IN THE PRESENCE OF MAGNESIUM PERCHLORATE

We have investigated the photosensitized monomerization of the cis,syn -cyclobutane dimer of 1,3-di-methylthymine using riboflavin tetraacetate and a 5-deazaflavin derivative as photosensitizer. Although little monomerization of the dimer is induced by photoexcitation of the flavins in the absence of any additives, the flavins can function as an efficient photosensitizer in the presence of magnesium perchlorate. Mechanistic studies involving spectroscopic, quantum-yield and flash-photolysis measurements demonstrated that the photosensitized monomerization exclusively proceeds through electron transfer from the dimer to the triplet flavins complexed with Mg²⁺. The effects of magnesium perchlorate are compared with those on the chloranil-photosensitized monomerization and also with the effects of HClO₄ on the flavin-photosensitized reaction.     

Synthetic study of optically active 3-azabicyclo[3.3.0]octane-2,6,8-tricarboxylic acid

Synthesis of (1R,2S,5S,6R,8S)-3-azabicyclo[3.3.0]octane-2,6,8-tricarboxylic acid (2) from trans-4-hydroxy-L-proline (5) was attempted. A Diels-Alder reaction of 3,4-dehydroproline derivative 9 and cyclopentadiene afforded a single stereoisomer 11. The Diels-Alder adduct was smoothly converted to the hydrochloride of 2 (24) via RuO(4) oxidation. Although some racemization of the material or product was observed during the synthetic processes, the amino acid 24 proved to be optically pure.