Explicit limits for nonperiodic homogenization and reduction of dimensionLimites explicites pour l'homogénéisation non-périodique et la réduction de dimension

The aim of this Note is to give explicit limit expressions, for diffusion equations involving a small parameter ε, describing both nonperiodic homogenization and reduction of dimension. We consider two kinds of reduction of dimension: the case of plates and the case of thin cylinders. In particular, we give the limit diffusion equation for stratified plates. This is completely explicit and requires no special assumption, except stratification. In the case of thin cylinders, the formulae are less explicit, but we also indicate some simple applications to fibered materials. To cite this article: B. Gustafsson, J. Mossino, C. R. Acad. Sci. Paris, Ser. I 334 (2002) 977–982.     

Corrigendum to “EuBaFe2O5+w: Valence mixing and charge ordering are two separate cooperative phenomena” [J. Solid State Chem. 180 (2007) 148-157]

An error in the expression for the Fe²⁺, Fe³⁺ valence-mixing probability in RBaFe₂O_5+w is acknowledged and correct formula is derived. The new formula slightly improves the least-squares fit to the experimental concentrations of the Mössbauer component Fe^2.5+ as a function of the oxygen-nonstoichiometry parameter w for R=Eu.     

Pure-silica optical waveguides, fiber couplers, and high-aspect ratio submicrometer channels for electrokinetic separation devices

A new fabrication procedure for integration of ultraviolet transparent pure-silica planar waveguides, fiber couplers and high-aspect ratio submicrometer channels is presented. Only a single photolithographic mask step is required. The channels are 80-90 microm deep and the width can be reduced to about 0.5 microm, corresponding to a height-to-width ratio of more than 150. The core of the waveguides consists of pure silicon dioxide, which is favorable over doped silica, due to the absence of absorption centers associated with the dopants. This furthermore improves the long-term stability of the waveguides, because of an increased radiation resistance of the glass. The propagation loss decreases from 1.0 dB/cm at 200 nm to 0.2 dB/cm at 800 nm, which, to our knowledge, is the lowest propagation loss reported for integrated planar waveguides in the ultraviolet wavelength region to date. The effective optical path length is 1.2 mm for an absorbance cell with a nominal length of 1.0 mm, indicating effective suppression of stray light. The limit of detection for paracetamol when present in the entire channel network was determined to 3 microg/mL. Finally, the applicability of the fabricated devices for capillary electrophoresis was evaluated by separation of caffein, paracetamol and ketoprofone using absorbance detection at 254 nm.     

Preparation of 1-ferrocenyl-2-methyl-1-propylamine,a highly effective chiral template in asymmetrically induced synthesis

The 1-ferrocenyl-2-methyl-1-propylamine (2a)is the most effective chiral template in asymmetrically induced peptide synthesis by stereoselective four component condensation (4CC). Two routes for the synthesis of this amine via its N,N-dimethyl derivative (12a) an described. One route involves the conversion of 12a into the corresponding azide 14a by treatment with methyl iodide/sodium azide in diglyme/water and subsequent reduction of the azide. The preferred other route consists of treating 12a with thioglycolic acid/formic acid to yield the carboxymethylmercapto derivative 9a and transformation of the latter into 2a with aqueous ammonia/ammonium chloride/mercuric chloride. Some related reactions are also discussed.     

Cation influence on the structure and electron density of water in some Men+·H2O complexes

The cation influence on the water molecule in the Li⁺·H₂O, Be²⁺·H₂O, Mg²⁺·H₂O and A1³⁺·H₂O complexes has been studied by means of quantum-mechanical ab initio calculations. A number of general trends are noted. (1) The calculated equilibrium water O-H distances increase with increasing binding energies, i.e. in the order Li⁺, Mg²⁺, Be²⁺, Al³⁺. The H-O-H angles differ by about ±1 ° from the calculated equilibrium angle for the free H₂O molecule; the variation has no systematic trend. (2) The electron density redistribution accompanying the change in the internal H₂O geometry in these complexes is considerably smaller than the redistribution brought about by the direct influence of the external field. (3) The harmonic O-H stretching force constant decreases with increased cation-water bonding. (4) The qualitative features of the density changes are very similar for the four complexes. The magnitudes of the interactions follow the relation Li⁺ < Mg²⁺ < Be²⁺ Al³⁺. An increased polarization of the H₂O molecule occurs with electron migration from the H atoms towards the O atom and an accumulation of electron charge approximately at the centre of the Meⁿ⁺—O bond, especially in Be²⁺·H₂O and A1³⁺·H₂O. An electron deficiency is found in the lone-pair region.     

Independent component analysis yields chemically interpretable latent variables in multivariate regression

This work shows that independent component analysis (ICA) can be used to obtain statistically independent and, therefore, chemically interpretable latent variables (LVs) in multivariate regression. Two novel algorithms based on ICA are introduced and compared with two classical methods on simulated data: principal component regression and partial least-squares regression. All methods compared yield accurate predictions, but only those based on ICA yield LVs that are chemically interpretable. Practical limitations of ICA-based regression with respect to the underlying assumptions, sample size, and measurement noise are discussed and illustrated by means of simulations.     

Chiral bidentate aminophosphine ligands: synthesis, coordination chemistry and asymmetric catalysis

Chiral aminophosphines Ph2PN(R)(CH2)nN(R)PPh2 1-4 [n= 2, R = CH(CH3)(Ph) 1; n= 3, R = CH(CH2CH3)(Ph) 2, n= 2, R = CH(CH3)(1-naphthyl) 3; n= 2, R = CH(CH3)(C6H11) 4] were synthesized by the reaction of ClPPh2 with the appropriate easily accessible enantiopure amine building blocks. For compounds 1 and 2, the corresponding selenides 5 and 6 were prepared to determine the electronic character of the phosphine moieties. By reaction of 1 with either PdCl2(cod) or PdCl(CH3)(cod) the cis-complexes 7 and 8 were obtained. The molecular structure for complex 7, cis-[PdCl2(1)], was determined by X-ray crystallography. Reaction of PtCl2(cod) with 1 or 2 yielded the corresponding monomeric cis-isomers 9 and 10. The rhodium derivative [RhCl(CO)(1)] (11) was obtained as a mixture of cis and trans-isomers. Preliminary results in the rhodium catalyzed hydroformylation of styrene and vinyl acetate, with ee's up to 51% and high regioselectivities, showed the potential of these chiral aminophosphines for homogeneous catalysis.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

Computer-Assisted Solution of Chemical Problems—The Historical Development and the Present State of the Art of a New Discipline of Chemistry

The topic of this article is the development and the present state of the art of computer chemistry, the computer-assisted solution of chemical problems. Initially the problems in computer chemistry were confined to structure elucidation on the basis of spectroscopic data, then programs for synthesis design based on libraries of reaction data for relatively narrow classes of target compounds were developed, and now computer programs for the solution of a great variety of chemical problems are available or are under development. Previously it was an achievement when any solution of a chemical problem could be generated by computer assistance. Today, the main task is the efficient, transparent, and non-arbitrary selection of meaningful results from the immense set of potential solutions—that also may contain innovative proposals. Chemistry has two aspects, constitutional chemistry and stereochemistry, which are interrelated, but still require different approaches. As a result, about twenty years ago, an algebraic model of the logical structure of chemistry was presented that consisted of two parts: the constitution-oriented algebra of be- and r-matrices, and the theory of the stereochemistry of the chemical identity group. New chemical definitions, concepts, and perspectives are characteristic of this logic-oriented model, as well as the direct mathematical representation of chemical processes. This model enables the implementation of formal reaction generators that can produce conceivable solutions to chemical problems—including unprecedented solutions—without detailed empirical chemical information. New formal selection procedures for computer-generated chemical information are also possible through the above model. It is expedient to combine these with interactive methods of selection. In this review, the Munich project is presented and discussed in detail. It encompasses the further development and implementation of the mathematical model of the logical structure of chemistry as well as the experimental verification of the computer-generated results. The article concludes with a review of new reactions, reagents, and reaction mechanisms that have been found with the PC-programs IGOR and RAIN.