Determination of adsorptive properties of clay/water system: methylene blue sorption

In this study, adsorption of methylene blue onto clay was investigated. The effect of adsorption time and temperature on the adsorption process was studied. To reveal the adsorptive characteristics of the clay studied, porosity and BET surface area measurements were made. It was observed that the adsorption capacity decreases with increasing temperature, and adsorption equilibrium was attained within 1 h. It was found that the data fit well to Langmuir, Halsey, Henderson, and Harkins-Jura models but experimental data deviate significantly from BET and Freundlich models at especially high concentrations. Furthermore, isosteric adsorption enthalpy and entropy are calculated as -7.99 kJ mol(-1) and 25.41 JK(-1)mol(-1), respectively.     

Polyfluorene Thin Films Synthesized by a Novel Plasma Polymerization Method

The synthesis of polyfluorene (PF) thin films by simultaneously superposing a continuous and pulsed discharge and the characterizations of these samples are presented. The double discharge plasma system is constructed by superposing two discharges; namely, a low pressure dc glow one and a high current pulsed one. The fluorene monomer in powder form was vaporized in the system at argon plasma without any modification, at 0.5 mbar operating pressure. The structure of the thin films was investigated via XPS, UV–visible, FTIR, XRD and SEM. The FTIR and the UV–visible results revealed that the fluorene structure was retained at the produced samples. Semi-conducting behavior was established, and upon the iodine doping, the optical energy band gap (E _g ) dropped down from 3.7 to 2.4 eV. The morphology of the synthesized PF thin films was amorphous, with granular structures of different sizes depending on the location of the substrate.     

Versatile light‐responsive organogels: Evaluation of their dye releasing and photoinitiation behaviors

Light‐responsive crosslinked structures were prepared by a straightforward quaternization strategy using chloride functional polystyrene copolymers and commercially available Michler's ketone with varying feed ratios. Resulting organogels demonstrated excellent solvent absorption and their swelling characteristics were altered by UV‐light irradiation. According to scanning electron microscope images, UV‐illuminated samples showed an obvious photodecomposition, which enhanced their solvent uptake capacity with increase of UV exposure. Additionally, release behavior of eosin Y as a model compound was determined by UV–vis and fluorescence spectrometers. Achieved photoactive gels were also employed as the reusable heterogeneous initiators for photoinduced free‐radical polymerization of methyl methacrylate. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1275–1282     

Development and validation of an LC‐MS/MS method for simultaneous quantitative analysis of free and conjugated bisphenol A in human urine

Bisphenol A (BPA) is an environmental endocrine‐disrupting chemicals that is widely used in common consumer products. There is an increasing concern regarding human exposure to BPA owing to the potential adverse effects associated with its estrogenic activity. For assessing environmental exposure to BPA, it is essential to have a sensitive, accurate and selective analytical method, especially one that can detect low BPA levels in complex sample matrices. In this study, we developed and validated an accurate, sensitive, and robust liquid chromatography–tandem mass spectrometry method for simultaneous quantification of free BPA and BPA β‐d ‐glucuronide (BPA‐gluc) concentrations in human urine with only a single injection. Calibration curves were linear over a concentration range of 1–100 ng/mL for BPA and 10–1000 ng/mL for BPA‐gluc. The levels of the analytes were determined quantitatively with HPLC/ESI‐MS/MS by using negative electrospray ionization in the select ion monitoring mode and a pentaflouraphenyl propyl column. The validated method was applied to the analysis of spot urine specimens collected from randomly selected healthy human subjects. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel ditopic ring-expanded N-heterocyclic carbene ligand-assisted Suzuki-Miyaura coupling reaction in aqueous media

A series of seven-membered ditopic ring-expanded N-heterocyclic carbene (dre-NHC) precursors, bearing sterically demanding and electron-rich aryl groups, were synthesised in moderate yields via the reaction of 1,2,4,5-tetrakis(bromomethyl)benzene with the corresponding N,N′-diarylformamidines in the presence of K₂CO₃ in acetonitrile under an air atmosphere. All new compounds were characterised by HRMS, NMR spectroscopy, and microanalysis, as well as X-ray crystallography for compound 1c. The development of an efficient catalytic system for the Suzuki-Miyaura coupling reaction of aryl chlorides with various boronic acids was also investigated using the in situ generated dre-NHC ligands.     

Low Reynolds number aerodynamics of free-to-roll low aspect ratio wings

The aerodynamics of thin, flat-plate wings of various planforms (rectangular, elliptical and Zimmerman) have been studied in free-to-roll experiments in a wind tunnel. Non-zero trim angles at low angles of attack, self-induced roll oscillations with increasing angle of attack and even autorotation in some cases were observed. The rectangular wings with round leading-edge had non-zero trim angles at low incidences due to the asymmetric development of the three-dimensional separation bubble at these low Reynolds numbers. With increasing angle of attack, the bubble increases in length and once reattachment is lost, large amplitude roll oscillations develop. The Strouhal number of the roll oscillations is of the order of 10⁻², which is in the same range as those expected for small aircraft experiencing atmospheric gusts. Velocity measurements revealed that variations in the strength of the vortices drove the rolling motion. At the mean roll angle, because of the time lag in the strength of the vortices, an asymmetric flow is generated, which results in a net rolling moment in the direction of the rolling motion.     

Thermal Decomposition Kinetics of Some Metal Complexes of 2,3-Hydroxyimino-4-phenyl-6-phenyazo-1-thia-4,5-diazacyclohexa-5-diene

The Ni(II), Cu(II) Co(II) and Zn(II) complexes of 2,3‐hydroxyimino‐4‐phenyl‐6‐phenyazo‐1‐thia‐4,5‐diaza‐ cyclohexa‐5‐diene (H₂L) were synthesized. Thermal behavior of these complexes was studied in dynamic nitrogen atmosphere by TA (thermogravimetric analysis), DTA (differential thermal analysis) and DTG (differential thermal gravimetry) techniques. The reaction order, the activation energies, the entropies, the enthalpies, the free energies, and the pre‐exponential factors of the thermal decomposition reactions were calculated from the thermogravimetric curves. The kinetic analysis of the thermogravimetric data was performed by using several methods such as MacCallum‐Tanner (MT), van Krevelen (vK), Madhusudanan‐Krishnan‐Ninan (MKN), Wanjun‐Yuwen‐Hen‐Cunxin (WYHC), Horowitz‐Metzger (HM) and Coats‐Redfern method (CR) based on the single heating rate. Most appropriate methods were determined for each decomposition step according to the least‐square linear regression. The Ni(II), Cu(II) Co(II) and Zn(II) complexes displayed one‐ or two‐stage decomposition pattern when heating in a dynamic nitrogen atmosphere and metal oxides remained as end products of the complexes. The characterization of the end products of the decomposition was performed by X‐ray diffraction.     

Synthesis of main chain polymeric benzophenone photoinitiator via thiol‐ene click chemistry and Its use in free radical polymerization

Main chain polymeric benzophenone photoinitiator (PBP) was synthesized by using “Thiol‐ene Click Chemistry” and characterized with ¹H NMR, FTIR, UV, and phosphorescence spectroscopies. PBP as a polymeric photoinitiator presented excellent absorption properties (ε₂₉₄ = 28,300 mol^?1L^?1cm^?1) compared to the molecular initiator BP (ε₂₅₂ = 16,600 mol^?1L^?1cm^?1). The triplet energy of PBP was obtained from the phosphorescence measurement in 2‐methyl tetrahydrofurane at 77 K as 298.3 kJ/mol and according to phosphorescence lifetime, the lowest triplet state of PBP has an n‐π* nature. Triplet–triplet absorption spectrum of PBP at 550 nm following laser excitation (355 nm) were recorded and triplet lifetime of PBP was found as 250 ns. The photoinitiation efficiency of PBP was determined for the polymerization of Hexanedioldiacrylate (HDDA) with PBP and BP in the presence of a coinitiator namely, N‐methyldiethanolamine (MDEA) by Photo‐DSC. The initiation efficiency of PBP for polymerization of HDDA is much higher than for the formulation consisting of BP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Rhodium- and palladium-catalyzed 1,5-substitution reactions of 2-en-4-yne acetates and carbonates with organoboronic acids

Two methods involving the rhodium-catalyzed reaction of 2-en-4-yne acetates and the palladium-catalyzed reaction of 2-en-4-yne carbonates with organoboronic acids were investigated; both afforded exclusively the (E)-configured vinylallenes. The coordinative interaction of the rhodium with the acetate group promoted the δ-elimination of Rh(I)-OAc from the alkenylrhodium intermediate II in both syn and anti modes, with the syn-elimination being the major path. DFT calculations revealed that a conformer of this intermediate (II), which can lead to the (E)-configured vinylallene product via the syn-elimination mode, is energetically the most favorable conformer. The rhodium-catalyzed procedure is not applicable to reactions involving (E)-configured enyne acetates, because the geometry of the alkenylrhodium intermediate that is derived from the corresponding (E)-enyne acetate would not allow such coordinative interaction to occur. The palladium-catalyzed method, which proceeds through formation of the σ-vinylallenylpalladium intermediate, B, is suitable for both the (E)- and (Z)-configured enyne carbonates and appears to have a wider scope for both organoboronic acids and enyne substrates. The palladium-catalyzed reaction of an enantiomerically enriched enyne carbonate proceeded with racemization.     

An extensive FPGA-based realization study about the Izhikevich neurons and their bio-inspired applications

This study is aimed at analysing damping and gyroscopic effects on the stability of parametrically excited continuous rotor systems, taking into account both external (non-rotating) and internal (rotating) damping distributions. As case-study giving rise to a set of coupled differential Mathieu–Hill equations with both damping and gyroscopic terms, a balanced shaft is considered, modelled as a spinning Timoshenko beam loaded by oscillating axial end thrust and twisting moment, with the possibility of carrying additional inertial elements like discs or flywheels. After discretization of the equations of motion into a set of coupled ordinary differential Mathieu–Hill equations, stability is studied via eigenproblem formulation, obtained by applying the harmonic balance method. The occurrence of simple and combination parametric resonances is analysed introducing the notion of characteristic circle on the complex plane and deriving analytical expressions for critical solutions, including combination parametric resonances, valid for a large class of rotors. A numerical algorithm is then developed for computing global stability thresholds in the presence of both damping and gyroscopic terms, also valid when closed-form expressions of critical solutions do not exist. The influence on stability of damping distributions and gyroscopic actions is then analysed with respect to frequency and amplitude of the external loads on stability charts in the form of Ince–Strutt diagrams.