Experimental investigation on heat transfer behavior of the novel ternary eutectic PCM embedded with MWCNT for thermal energy storage systems

Journal of Thermal Analysis and Calorimetry - In this paper, the variation of thermophysical properties such as the thermal conductivity, thermal energy storage capacity, viscosity, and phase...     

Generation of 0.2-TW 5.5-fs optical pulses at 1 kHz using a differentially pumped hollow-fiber chirped-mirror compressor

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The spectral broadening at the hollow-fiber compressor was optimized by adjusting gas pressure, laser intensity, and laser chirp, covering from 540 nm to 950 nm. PACS 42.65.Jx; 42.65.Re     

Synthesis and antimycobacterial activity of some beta-carboline alkaloids

In view of the attributed medicinal properties of beta-carboline alkaloids, some new O-acyl derivatives of beta-carboline alkaloid--harmol, were prepared and tested for possible antimycobacterial activity against Mycobacterium tuberculosis H37Rv.     

Adsorptive Behavior of Methylene Blue onto Sawdust of Sour Lemon,Date Palm,and Eucalyptus as Agricultural Wastes

In the present study, to remove methylene blue (MB) from aqueous solution, some agricultural residues and cheap bioadsorbents such as sawdust of palm trees, eucalyptus, and sour lemon were used. To do this, significant parameters like contact time, temperature, pH, initial concentration, and adsorbent dosage were checked. The results affirmed that the best conditions for MB adsorption from aqueous solution were obtained such as the temperature of 25?°C, pH of 8, adsorbent dosage of 2g/L, contact time of 120?minutes, and dye concentration of 5?mg/l which under these conditions the adsorption efficiencies determined were 95.8, 93.4, and 92.8% using sawdust of palm tree, eucalyptus, and sour lemon, respectively. Also, the equilibrium behavior of adsorbents showed that the Freundlich model could better predict the adsorption behavior of the process due to having a larger correlation coefficient (R²). The maximum biosorption capacities by Langmuir isotherm model were also obtained 54, 53.5, and 52.4?mg/g for sawdust of palm trees, eucalyptus, and lemon, respectively, which were significant amounts. In addition, kinetic behavior of adsorption showed that pseudo-second-order model can describe the kinetics of the adsorption process better than the pseudo-first-order model. Moreover, kinetic, equilibrium, and thermodynamic behaviors of adsorption affirmed that the biosorption process was desirable, physisorption, spontaneous, and exothermic.     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.     

Radiation-induced decoloration of oxazine in ethanolic solution

The decoloration yield of oxazine 720 in ethanolic solution was studied as a function of dose rate and concentration of the dye. Linear response for G values to a dose of 1.68 KGy was observed for various dye concentrations. The effect of various organic substances in the radiolysis of the dye was studied and the results were interpreted in terms of scavenging reactions.     

Solvent‐assisted anionic ring opening polymerization of glycidol: Toward medium and high molecular weight hyperbranched polyglycerols

Hyperbranched polyglycerols (HPGs) are globular structures with a large number of functionalizable hydroxyl groups and have excellent in vitro and in vivo biocompatibility profiles comparable to polyethylene glycol. This work introduces a facile method for the synthesis of medium molecular weights (M_ws) (50–300 kDa) HPGs, which has been difficult to synthesize with low polydispersity, with the assistance of solvents by ring opening polymerization. The influence of different solvents (1,4‐dioxane, tetrahydropyran (THP), ethylene glycol diethyl ether (EGDE) and decane), solvent to glycidol ratio, concentration of glycidol and the time of polymerization on M_w and polydispersity of HPGs has been studied. The M_w and polydispersity of HPGs are significantly affected by the nature of the polymerization phase (homogeneous or heterogeneous) and chemical structure of the solvent. The differences in the solvation of the potassium cations and change in the nucleophilicity of the alkoxide anion in various solvents may be responsible for the changes in M_w and PDI of the HPG. The M_w of the HPG decreases in the order 1,4‐dioxane > THP > EGDE >decane. The microstructure, solution and thermal properties of the HPG do not depend on the nature of solvent. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2614–2621