Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Experimental investigation on heat transfer behavior of the novel ternary eutectic PCM embedded with MWCNT for thermal energy storage systems

Journal of Thermal Analysis and Calorimetry - In this paper, the variation of thermophysical properties such as the thermal conductivity, thermal energy storage capacity, viscosity, and phase...     

Two-photon revival-collapse phenomenon in the evolution of the quadrature squeezing of the four-photon Jaynes-Cummings model

We prove that the revival-collapse phenomenon occurring in the atomic inversion of the two-photon Jaynes-Cummings model, when the mode is initially prepared in the coherent state and the atom is in the excited state, can be obtained from the evolution of the quadrature squeezing of the four-photon Jaynes-Cummings model.     

Generation of 0.2-TW 5.5-fs optical pulses at 1 kHz using a differentially pumped hollow-fiber chirped-mirror compressor

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The spectral broadening at the hollow-fiber compressor was optimized by adjusting gas pressure, laser intensity, and laser chirp, covering from 540 nm to 950 nm. PACS 42.65.Jx; 42.65.Re     

Laser pulse heating of steel surface and flexural wave analysis

Laser gas-assisted material processing finds wide application in industry. The modelling of heating, elastic response of the substrate material, and the wave analysis gives insight into the laser workpiece interaction. In the present study, laser gas-assisted heating of steel is considered. The normal component of the thermal stress is taken as the source of load for the flexural wave generation in the material. The flexural wave generated is simulated and the wave characteristics are analyzed at four locations at the workpiece surface. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and heat transfer while finite element and spectran element methods are used when solving the stress and wave equations. It is found that the normal component of the stress is tensile. The dispersion effect of the workpiece material, interference of the reflected beam, and partial overlapping of second mode of the travelling wave enable to identify a unique pattern in the travelling wave in the substrate.     

Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

Synthesis and antimycobacterial activity of some beta-carboline alkaloids

In view of the attributed medicinal properties of beta-carboline alkaloids, some new O-acyl derivatives of beta-carboline alkaloid--harmol, were prepared and tested for possible antimycobacterial activity against Mycobacterium tuberculosis H37Rv.     

Multigrid solution of the Poisson—Boltzmann equation

A multigrid method is presented for the numerical solution of the linearized Poisson–Boltzmann equation arising in molecular biophysics. The equation is discretized with the finite volume method, and the numerical solution of the discrete equations is accomplished with multiple grid techniques originally developed for twodimensional interface problems occurring in reactor physics. A detailed analysis of the resulting method is presented for several computer architectures, including comparisons to diagonally scaled CG, ICCG, vectorized ICCG and MICCG, and to SOR provided with an optimal relaxation parameter. Our results indicate that the multigrid method is superior to the preconditioned CG methods and SOR and that the advantage of multigrid grows with the problem size. © 1993 John Wiley & Sons, Inc.     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.     

Solvent extraction of lanthanum(III), europium(III) and lutetium(III) with fluorinated 1-phenyl-3-methyl-4-benzoyl-5-pyrazolones into chloroform

A series of chelating reagents, 1-phenyl-3-methyl-4-(2-fluorobenzoyl)-5-pyrazolone, 1-phenyl-3-methyl-4-(3-fluorobenzoyl)-5-pyrazolone and 1-phenyl-3-methyl-4-(4-fluorobenzoyl)-5-pyrazolone, has been synthesized. The extraction of Ln(III), (Ln = La, Eu and Lu) into chloroform with these reagents at 30 +/- 1 degrees has been studied. The composition of the complexes extracted has been determined by the slope method, and the extraction constants K(ex), were measured. The presence of the fluorine atom in the reagents does not make the K(ex), values much different from those obtained with the parent pyrazolone.