An NMR-Based Approach to the Measurement of High Log K HL Values at Low Ionic Strength. 31P NMR Study of 1,2-Diaminoethane-N,N,N′,N′-tetra(methylenephosphonic Acid) Protonation Equilibrium at pH > 12

A sequential NMR based approach is proposed for measurements of high log K values at low ionic strength. [³¹P] NMR technique is used to determine the protonation constants of 1,2-diaminoethane-N,N,N,N-tetra(methylenephosphonic acid) (EDTPH, H₈L) at 25°C in 0.1 mol-dm^–3 KNO₃ and at 37°C in 0.15 mol-dm^–3 NaCl at pH 11–14. For equilibrium L + H HL log K are found to be 13.3 (0.1) and 12.9 (0.1), respectively.     

Synthesis and spectroscopic characterization of a new family of Ni(4) spin clusters

A new family of tetranuclear Ni complexes [Ni(4)(ROH)(4)L(4)] (H(2)L = salicylidene-2-ethanolamine; R = Me (1) or Et (2)) has been synthesized and studied. Complexes 1 and 2 possess a [Ni(4)O(4)] core comprising a distorted cubane arrangement. Magnetic susceptibility and inelastic neutron scattering studies indicate a combination of ferromagnetic and antiferromagnetic pairwise exchange interactions between the four Ni(II) centers, resulting in an S = 4 spin ground state. Magnetization measurements reveal an easy-axis-type magnetic anisotropy with D approximately -0.93 cm(-)(1) for both complexes. Despite the large magnetic anisotropy, no slow relaxation of the magnetization is observed down to 40 mK. To determine the origin of the low-temperature magnetic behavior, the magnetic anisotropy of complex 1 was probed in detail using inelastic neutron scattering and frequency domain magnetic resonance spectroscopy. The spectroscopic studies confirm the easy-axis-type anisotropy and indicate strong transverse interactions. These lead to rapid quantum tunneling of the magnetization, explaining the unexpected absence of slow magnetization relaxation for complex 1.     

Quantitation of perfluoroalkyl acids,parabens and cotinine from single low volume serum sample by validated analytical method

ABSTRACT

In this paper, we present the results of an analytical method that has been recently developed, validated and successfully applied in a biomonitoring approach. In the environmental pollutant studies it is desirable that the analytical method can determine multiple classes of compounds from a single, small volume sample. The presented analytical method with a simple sample pre-treatment allows the quantitation of 13 perfluoroalkyl acids (PFAAs), 6 parabens and cotinine (used as nicotine biomarker) from a single, small volume of 100 µL serum sample by liquid chromatography-triple quadrupole mass spectrometer (LC-MS/MS). The limits of quantitation (LOQ) for PFAAs, parabens and cotinine were 0.10–0.50, 0.20–0.80 and 0.10 ng/mL, respectively. Besides sensitivity the method has excellent trueness/accuracy and repeatability. The trueness of the method for the determination of PFAAs ranged from 95% to 106% and the repeatability (as RSD %) from 0.6% to 5.6%. The accuracy and RSD for parabens were 73–120% and 1.3–9.7%, respectively, and 100–106% and 1.3–3.5 % for cotinine. Biomonitoring data reveals the presence of several PFAAs and parabens in serum samples of Finnish population. The total concentrations for PFAAs and parabens were from 2.0 to 33 ng/mL and from <LOQ to 1100 ng/mL, respectively. Nearly all non-smokers had the serum cotinine concentration below 1.0 ng/mL, which can be suggested as the cut point for cotinine concentration to identify smoking.     

Wettability conversion on the liquid flame spray generated superhydrophobic TiO2 nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer

Titanium dioxide (TiO₂) is a photoactive material with various interesting and useful properties. One of those is the perfect wettability of TiO₂ surface after ultraviolet (UV) illumination. Wettability of a solid surface plays an important role in the field of printing, coating, and adhesion among others. Here we report on a superhydrophobic and photoactive liquid flame spray (LFS) generated TiO₂ nanoparticle coating that can be applied on web-like materials such as paper and board in one-step roll-to-roll process. The LFS TiO₂ nanoparticle coated paper and board were superhydrophobic instantly after the coating procedure because of spontaneously accumulated carbonaceous overlayer on TiO₂, and thus there was no need for any type of separate hydrophobization treatment. The highly photoactive LFS TiO₂ nanoparticle coating could be converted steplessly from superhydrophobic to superhydrophilic by UV-illumination, and the coating gave strong response to natural daylight illumination even in the shade. The superhydrophobic LFS TiO₂ coated surface can be used as an intelligent substrate, where photo-generated hydrophilic patterns guide the fluid setting and figure formation. Our study reveals that the wettability changes on the LFS TiO₂ surface were primarily caused by the photocatalytic removal of the carbonaceous material from TiO₂ during the UV-illumination and spontaneous accumulation of the carbonaceous material on the surface of the metal oxide during storage in the dark. The latter mechanism was found to be a temperature activated process which could be significantly speeded up by heat treatment. If other mechanisms such as surface oxidization, increment of hydroxyl groups, or charge separation played a role in the wetting phenomena on TiO₂, their effect was rather secondary as the removal and accumulation of the carbonaceous material dominated the wettability changes on the surface. Our study gives valuable information on the complex issue of photo-induced wettability changes on TiO₂.     

Monitoring bisphenol A and estrogenic chemicals in thermal paper with yeast-based bioreporter assay

Bioluminescent Saccharomyces cerevisiae yeast-based bioreporters were used to monitor bisphenol A and other estrogenic chemicals in thermal paper samples collected mainly from Finland on two occasions in 2010/2011, and 2013. The bisphenol A-targeted (BPA-R) and the human oestrogen receptor (hERα) bioreporters were applied to analyse both non-treated and extracted paper samples. Bisphenol A was readily bioavailable to the yeast bioreporters on the non-treated paper samples without any pre-treatment. Detected concentrations ranged from a detection limit of 9–142 μg/g to over 20 mg/g of bisphenol A equivalents in the thermal papers. Low bisphenol A like activities were detected in many samples, and were considered to be caused by residual bisphenol A or other types of bisphenols, such as bisphenol S. Most of the thermal paper samples were toxic to the yeast bioreporters. The toxicity did not, however, depend on the bisphenol A concentration of the samples. The yeast bioreporters were demonstrated to be a robust and cost-efficient method to monitor thermal paper samples for their bisphenol A content and estrogenicity. Thermal paper was considered as a potential BPA source for both human exposure and environmental emission.     

Switchable water absorption of paper via liquid flame spray nanoparticle coating

Surface wetting/anti-wetting and liquid absorption are relevant properties of many porous solids including paper and other cellulose-based materials. Here we demonstrate how surface wetting by water and water absorption of commercially available kraft paper can be altered by thin nanoparticle coatings fabricated by liquid flame spray in facile and continuous one-step process. Surface wettability and absorption properties of paper increased with silica and decreased with titania (TiO₂) nanoparticle coatings. Moreover, the water-repellent (superhydrophobic) TiO₂ nanoparticle coated paper could be switched to superhydrophilic and water absorbing by ultraviolet illumination. The experiments revealed that although surface wetting and liquid absorption of nanoparticle coated paper are strongly related to each other, they are two distinct phenomena which do not necessarily correlate. We propose wetting regimes on the nanoparticle coated paper samples on the basis of the experimental observations.     

Multigraft copolymer superelastomers: Synthesis morphology, and properties

The synthesis of well-defined multigraft copolymers having a polydiene backbone with polystyrene side chains is briefly reviewed, with particular focus on controlling branch point spacing and branch point functionality. Use of living anionic polymerization and chlorosilane linking chemistry has led to the synthesis of series of materials having regularly spaced trifunctional (comb), tetrafunctional (centipede), and hexafunctional (barbwire) branch points. The morphologies of these materials were characterized by transmission electron microscopy and small-angle X-ray scattering, and it was found that the morphologies were controlled by the local architectural asymmetry associated with each branch point. Mechanical properties studies revealed that such multigraft copolymers represent a new class of thermoplastic elastomers (TPEs) with superior elongation at break and low residual strains as compared to conventional TPEs.     

Dilation theorems for positive definite operator kernels having majorants

Dilation theorems for Banach space valued stochastic processes and operator valued positive definite kernels are considered. It is shown, e.g., that a Banach space valued stochastic process X can be dilated to another process Y, if and only if the covariance kernel of Y is a majorant of the covariance kernel of X. Positive definite operator kernels having majorants of certain special type are characterized.     

Using a custom-FPGA architecture to extend the scale of atomistic magnetic spin simulations

New computational solutions are required to understand how atomic-scale properties affect magnetic behaviour at micrometer dimensions. We describe a field-programmable-gate-array (FPGA) based simulation of a dilute antiferromagnet with a large number of Ising spins using Glauber dynamics. The simple atomic model qualitatively reproduces experimental findings when scaled up to sufficiently large spatial dimensions, and provides insight into the finite size thresholds separating nanoscale from microscale behaviour. A real-time visualisation module was used to study the dynamics of the fractal domain structure and non-exponential relaxation mechanism. A performance comparison with contemporary GPU and CPU implementations suggests that a FPGA route is a competitive alternative.