Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

Magnetisation reversal in media with perpendicular anisotropy

In this paper, we discuss two key aspects of magnetisation reversal in magnetic thin films with perpendicular anisotropy. Firstly, a study has been made of the additional field required to erase data written perpendicular to a thin film recording disk as the linear data density is increased. It has been found that an increase in data density from 40 to 360 kfci results in an increase of 1.25 kOe in the field required to erase the data. Secondly, the effect of varying the level of exchange coupling by co-sputtering CoCrPt samples with SiO₂ has been studied using a characterisation technique that is independent of the self-demagnetising field. It has been found that the samples are fully exchange de-coupled when the film contains >9.8% SiO₂ and the activation volume of reversal remains constant for higher levels of SiO₂.     

Reduced inorganic phosphorus in the natural environment: significance, speciation and determination

It is commonly assumed that phosphorus occurs almost exclusively in the environment as fully oxidized phosphate (primarily H₂PO₄⁻ and HPO₄²⁻, where the oxidation state of phosphorus is +V). Recent developments in the field of microbiology and research on the origin of life have suggested a possibly significant role for reduced, inorganic forms of phosphorus in bacterial metabolism and as evolutionary precursors of biological phosphate compounds. Reduced inorganic forms of phosphorus include phosphorus acid (H₃PO₃, P(+III)), hypophosphorus acid (H₃PO₂, P(+I)) and various forms of phosphides (P(−III)). Reduced phosphorus has been detected in anaerobic sediments, sewage treatment facilities and in industrial and agricultural processes.Microbiological evidence suggests a significant role for reduced phosphorus species in metabolic processes and raises interesting questions regarding the biogeochemistry of this nutrient in the environment. However, the paucity of data on the presence and cycling of reduced phosphorus compounds in the environment requires attention in order to elucidate the role of these compounds in natural systems. This paper discusses the significance of reduced phosphorus in the natural environment, its speciation and methods of detection.     

Vibration intervals for tritiated H+3 and D+3

Ab initio calculated values of fundamental vibrational frequencies and zero-point energies are presented for HTD⁺, D₂T⁺, T₂D⁺, H₂T⁺, T₂H⁺ and T⁺₃.     

Multi-walled carbon nanotubes coated by multi-layer silica for improving thermal conductivity of polymer composites

Silica has been non-covalently coated on multi-walled carbon nanotubes (MWCNTs) using the sol–gel chemistry, where tetraethoxy silane (TEOS) was used to form an inorganic silica layer immediately next to surface of MWCNTs and octyl triethoxy silane was coated over the TEOS. Transmission electron microscopy (TEM) measurements show that the diameter of MWCNTs increases with increasing the number of coating layer, indicating that the silica has been coated on MWCNTs. Quantitative analysis from thermogravimetric analysis (TG) also indicates that the inorganic and organic silica has been successfully coated on MWCNTs. Further, quantitative analysis found that the amount of silica measured by TG agrees well with the increase of thickness of coated MWCNTs obtained from TEM, indicating that little or no free silica exists in the system. The thermal conductivity of epoxy/MWCNTs composite was studied and the results show that the thermal conductivity of the composite is improved by coating MWCNTs in this manner and increases with increasing the number of coatings.     

A parallel computational method for simulating two‐phase gel dynamics on a staggered grid

We develop a parallel computational algorithm for simulating models of gel dynamics where the gel is described by two phases, a networked polymer and a fluid solvent. The models consist of transport equations for the two phases, two coupled momentum equations, and a volume‐averaged incompressibility constraint. Multigrid with Vanka‐type box‐relaxation scheme is used as preconditioner for the Krylov subspace solver (GMRES) to solve the momentum and incompressibility equations. Through numerical experiments of a model problem, the efficiency, robustness and scalability of the algorithm are illustrated. Copyright © 2008 John Wiley & Sons, Ltd.     

Competing interaction effects in recording media

In this work we present a study of the effects of easy axis alignment on coupling effects in recording media. We have studied both particulate and thin film media representing both flexible and rigid disc materials. The texture in the systems has been determined via measurements of the angular dependence of remanence and the coupling determined using the well-established ΔM technique. In particulate media only dipolar coupling is present whereas in thin films intergranular exchange effects also occur. In our thin film samples the exchange coupling is weak so that dipolar effects dominate. We find that the dipolar effects in both systems increase with texture, increasing their dominance over exchange effects.