Optimal dynamic control of predator–prey models

Central European Journal of Operations Research - This paper combines work to use a decision support tool for sustainable economic development, while acknowledging interdependent dynamics of...     

Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Up to isometries,a deformation is a continuous function of its metric tensorAux isométries près,une déformation est une fonction continue de son tenseur métrique

If the Riemann–Christoffel tensor associated with a field of class $\text{C}{}^2$ of positive definite symmetric matrices of order three vanishes in a connected and simply connected open subset $\text{Ω?}\text{R}{}^3$, then this field is the metric tensor field associated with a deformation of class $\text{C}{}^3$ of the set $\text{Ω}$, uniquely determined up to isometries of $\text{R}{}^3$. We establish here that the mapping defined in this fashion is continuous, for ad hoc metrizable topologies. To cite this article: P.G. Ciarlet, F. Laurent, C. R. Acad. Sci. Paris, Ser. I 335 (2002) 489–493.     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

Crystal structure and magnetic properties of two new cobalt selenite halides: Co5(SeO3)4X2 (X=Cl, Br)

Two new isostructural cobalt selenite halides Co₅(SeO₃)₄Cl₂ and Co₅(SeO₃)₄Br₂ have been synthesized. They crystallize in the triclinic system space group P−1 with the following lattice parameters for Co₅(SeO₃)₄Cl₂: a=6.4935(8) Å, b=7.7288(8) Å, c=7.7443(10) Å, α=66.051(11)°, β=73.610(11)°, γ=81.268(9)°, and Z=1. The crystal structures were solved from single-crystal X-ray data, R1=3.73 and 4.03 for Co₅(SeO₃)₄Cl₂ and Co₅(SeO₃)₄Br₂, respectively. The new compounds are isostructural to Ni₅(SeO₃)₄Br₂.Magnetic susceptibility measurements on oriented single-crystalline samples show anisotropic response in a broad temperature range. The anisotropic susceptibility is quantitatively interpreted within the zero-field splitting schemes for Co²⁺ and Ni²⁺ ions. Sharp low-temperature susceptibility features, at T_N=18 and 20 K for Co₅(SeO₃)₄Cl₂ and Co₅(SeO₃)₄Br₂, respectively, are ascribed to antiferromagnetic ordering in a minority magnetic subsystem. In isostructural Ni₅(SeO₃)₄Br₂ magnetically ordered subsystem represents a majority fraction (T_N=46 K). Nevertheless, anisotropic susceptibility of Ni₅(SeO₃)₄Br₂ is dominated at low temperatures by a minority fraction, subject to single-ion anisotropy effects and increasing population of S_z=0 (singlet) ground state of octahedrally coordinated Ni²⁺.     

Topochemically Controlled Redox Reactions in the System In/Sn/Cl

The difference in reactivity of the two modifications of InCl in solid state reactions with SnCl₂ is discussed. It is explained on the basis of semi‐empirical and ab initio calculations giving the density of states diagrams of InCl and the energies of possible disproportionation reactions. Their general features are discussed on the basis of a simple bonding picture for open‐packed structures involving inert pair elements. A detailed analysis of the DOS distribution allows to pinpoint the observed redox instability to a specific structural feature of α‐InCl.     

Arithmetic functions with linear recurrence sequences

We obtain asymptotic formulas for all the moments of certain arithmetic functions with linear recurrence sequences. We also apply our results to obtain asymptotic formulas for some mean values related to average orders of elements in finite fields.