Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

Retracted: A new class of copper(I) complexes with imine-containing chelators which show potent anticancer activity

Seven novel complexes (C₁–C₇) were synthesized by the interaction between Cu(I) metal cation, L₁, L₂, L₃, X and PPh₃, where L₁–L₃ are derivatives of ((pyridine-2-ylmethylene)amino)phenol imine ligands and X = Cl⁻, Br⁻, I⁻, NCS⁻. All the complexes were characterized using infrared, ¹H NMR and ³¹P NMR spectroscopies. The crystal structures of C₁–C₇ were also determined using single-crystal X-ray diffraction. The organization of the crystal structures and the intermolecular interactions are discussed. The supramolecular assemblies are driven by cooperative π…π interactions and hydrogen bonds, followed by CH…π linkages. The potential anticancer effect of C₁–C₇ was assessed for human glioblastoma cells using several anticancer experiments, which showed that these complexes have marked anticancer property against U87 cells. It was also found that the minimum and maximum anticancer effects are shown by C₃- and C₄-treated samples, respectively. Furthermore, theoretical approaches were used to investigate the nature of metal–ligand interactions which suggest a closed-shell and electrostatic character for Cu…N, Cu…P and Cu…X bonds.     

Proving and Probing the Presence of the Elusive C−H⋅⋅⋅O Hydrogen Bond in Liquid Solutions at Room Temperature

Hydrogen bonds (H bonds) play a major role in defining the structure and properties of many substances, as well as phenomena and processes. Traditional H bonds are ubiquitous in nature, yet the demonstration of weak H bonds that occur between a highly polarized C−H group and an electron-rich oxygen atom, has proven elusive. Detailed here are linear and nonlinear IR spectroscopy experiments that reveal the presence of H bonds between the chloroform C−H group and an amide carbonyl oxygen atom in solution at room temperature. Evidence is provided for an amide solvation shell featuring two clearly distinguishable chloroform arrangements that undergo chemical exchange with a time scale of about 2 ps. Furthermore, the enthalpy of breaking the hydrogen bond is found to be 6–20 kJ mol⁻¹. Ab-initio computations support the findings of two distinct solvation shells formed by three chloroform molecules, where one thermally undergoes hydrogen-bond making and breaking.     

A Triple Pore Network Model (T-PNM) for Gas Flow Simulation in Fractured,Micro-porous and Meso-porous Media

Transport in Porous Media - In this study, a novel triple pore network model (T-PNM) is introduced which is composed of a single pore network model (PNM) coupled to fractures and micro-porosities....     

Two‐dimensional prediction of time dependent,turbulent flow around a square cylinder confined in a channel

This paper presents two‐dimensional and unsteady RANS computations of time dependent, periodic, turbulent flow around a square block. Two turbulence models are used: the Launder–Sharma low‐Reynolds number k–ε model and a non‐linear extension sensitive to the anisotropy of turbulence. The Reynolds number based on the free stream velocity and obstacle side is Re=2.2×10⁴. The present numerical results have been obtained using a finite volume code that solves the governing equations in a vertical plane, located at the lateral mid‐point of the channel. The pressure field is obtained with the SIMPLE algorithm. A bounded version of the third‐order QUICK scheme is used for the convective terms. Comparisons of the numerical results with the experimental data indicate that a preliminary steady solution of the governing equations using the linear k–ε does not lead to correct flow field predictions in the wake region downstream of the square cylinder. Consequently, the time derivatives of dependent variables are included in the transport equations and are discretized using the second‐order Crank–Nicolson scheme. The unsteady computations using the linear and non‐linear k–ε models significantly improve the velocity field predictions. However, the linear k–ε shows a number of predictive deficiencies, even in unsteady flow computations, especially in the prediction of the turbulence field. The introduction of a non‐linear k–ε model brings the two‐dimensional unsteady predictions of the time‐averaged velocity and turbulence fields and also the predicted values of the global parameters such as the Strouhal number and the drag coefficient to close agreement with the data. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of 3,5-diazabicyclo [5.1.0] octenes. A new platform to mimic glycosidase transition states

All-cis 1-hydroxymethyl 2,3 bis-aminomethyl cyclopropane was used to construct the first 3,5-diazabicyclo [5.1.0]-3-octenes. This system has the interesting ability to exist in a conformation that resembles a snapshot of a glycoside hydrolysis reaction with respect to charge and geometric analogy to an oxocarbenium ion, and the positioning of the departing aglycon. The cis-configured cyclopropane core was synthesized by Cu-catalyzed intramolecular cyclopropanation of benzyl protected cis-2-butene-1,4-diol diazoacetate ester. Serial functionalization to bis-aminomethyl cyclopropanes and subsequent cyclization to amidines lead to the target bicyclic compounds in good overall yields. Several glycosidases were surveyed for the inhibitory potential of these transition state analogs, and amongst them, selective competitive inhibitors with micromolar K_i values were identified.     

Radio labeling,quality control and biodistribution of <Superscript>99m</Superscript>Tc-cefotaxime as an infection imaging agent

Cefotaxime, a cephalosporin antibiotic, used to treat bacterial infections was investigated to label with ^99mTc. Labeling was performed using sodium dithionite as a reducing agent at 100 °C for 10 min and radiochemical analysis involved ITLC and HPLC methods. The stability of labeled antibiotic was checked in the presence of human serum at 37 °C up to 24 h. The maximum radiolabeling yield was 92 ± 2%. Bacterial binding assay was performed with S. aureus and the in vivo distribution was studied in mice. Images showed minimal accumulation in non-target tissues, with an average target/non-target ratio of 2.89 ± 0.58.