Spectrophotometric determination of ciprofloxacin in pure form and in tablets through charge-transfer complexation reactions

Three simple, quick and sensitive spectrophotometric methods are described for the determination of ciprofloxacin. The methods are based on the reaction of this drug as ann-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 7,7,8,8,-tetracyanoquinodimethane (TCNQ) andp-chloranil (CL) as -acceptors to give highly coloured complex species. The coloured products are quantitated spectrophotometrically at 460, 843 and 550 nm for DDQ, TCNQ and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5–50, 1.5–15 and 20–200 g ml^–1 ciprofloxacin, but the concentration ranges for best accuracy are 10–48, 2.5–15 and 35– 195 g ml^–1 of drug for DDQ, TCNQ and CL, respectively. The relative standard deviations are less than 1.5%. Applications of the suggested methods to ciprofloxacin tablets are presented and compared with the USP method. The stability constants of the 11 DDQ and CL complexes were 1.086 × 10⁴ and 2.581 × 10⁴ lmol^–1, respectively, whereas for the 12 TCNQ complex it was 3.62 × 10⁸1. mol^–1.     

Some polyhydroxy azo–azomethine derivatives of salicylaldehyde: Synthesis, characterization, spectroscopic, molecular structure and antimicrobial activity studies

Some new substituted polyhydroxy azo–azomethine compounds were prepared by reaction of tris(hydroxymethyl)aminomethane with (E)-2-hydroxy-5-(phenyldiazenyl) benzaldehyde and its substituted derivatives. The structures of azo and azo–azomethine compounds were determined by IR, UV–vis, ¹H NMR and ¹³C NMR spectroscopic techniques, and/or X-ray diffraction studies. According to IR spectra, all azo–azomethine compounds adopt keto form in solid state. UV–vis analysis has shown the presence of keto–enol tautomerism in solution for all azo–azomethine compounds, except that for nitro substituted derivative, enol form is dominantly favored in solution. At the same time, above mentioned derivative compounds were studied in vitro for their antimicrobial properties. Among the phenylazosalicylaldehyde series compound tested, 4-phenylazosalicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde, 4-(2-chlorophenylazo)salicylaldehyde, 4-(4-fluorophenylazo)salicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde and 4-(4-ethylphenylazo)salicylaldehyde showed a weak antimicrobial activity only against gram positive bacteria. On the contrary, phenylazosalicylaldehyde series compounds were reacted tris(hydroxmethyl)aminomethane, that exhibited a strong antimicrobial activity against gram positive bacteria, yeast and mould. Moreover, while the 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol did not show an inhibition on tested microorganism, the addition of phenyldiazine groups to 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol resulted in a strong increases in antimicrobial activity.     

Thermal analysis of pharmaceutical compounds

Some sulphonamides are evaluated by means of thermal analysis. Use is made of their characteristic endothermic DTA peaks (melting peaks), where the area changes linearly with variations in the amount of sulphonamides. The method is suitable for the determination of 30–100 mg of sulphathiazole, sulphisomidine, sulphaguanidine, sulphacetamide sodium and sulphamethoxypyridazine with reasonable accuracy. As for sulphisoxazole, two peaks are used for its determination: an endothermic one to determine 30–100 mg, and an exothermic one to determine 6–30 mg.

---

Zusammenfassung Einige Sulphonamide wurden durch thermische Analyse bestimmt, wobei von der linearen Abhängigkeit der Fläche der charakteristischen endothermen DTA-Peaks (Schmelzpeaks) von der Menge der Sulphonamide Gebrauch gemacht wurde. Mit der Methode können 30–100 mg Sulphathiazol, Sulphisoimidin, Sulphaguanidin, Natrium-Sulphacetamid und Sulphamethoxypyridazin mit ausreichender Genauigkeit bestimmt werden. Bei der Bestimmung von Sulphisooxazol wurde ein endothermer Peak für Mengen von 30–100 mg und ein exothermer für geringere Mengen von 6–30 mg herangezogen.

---

. - ( ), . 30–100 , , , . , — 30 100 , — 6 30 .

     

Reversible $$G^k$$ G k -codes with applications to DNA codes

Designs, Codes and Cryptography - In this paper, we give a matrix construction method for designing DNA codes that come from group matrix rings. We show that with our construction one can obtain...     

A 1H NMR study of 1,4-bis(N-hexadecyl-N, N-dimethylammonium)butane dibromide/sodium anthranilate system: spherical to rod-shaped transition

The effect of addition of sodium anthranilate to 5 mM micellar solutions of gemini surfactant 1,4-bis(N-hexadecyl-N,N-dimethylammonium)butane dibromide is investigated by ¹H NMR. The solubilization site of anthranilate anion near the micellar surface is inferred. In the micelles, the An⁻ ions intercalate among the surfactant headgroups producing morphological changes.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Oxidation of cyclohexane catalyzed by metal-ion-exchanged zeolites

The ion-exchange rates and capacities of the zeolite NaY for the Cu(II), Co(II), and Pb(II) metal ions were investigated. Ion-exchange equilibria were achieved in approximately 72 h for all the metal ions. The maximum ion exchange of metal ions into the zeolite was found to be 120 mg Pb(II), 110 mg Cu(II), and 100 mg Co(II) per gram of zeolite NaY. It is observed that the exchange capacity of a zeolite varies with the exchanged metal ion and the amount of metal ions exchanged into zeolite decreases in the sequence Pb(II) > Cu(II) > Co(II). Application of the metal-ion-exchanged zeolites in oxidation of cyclohexane in liquid phase with visible light was examined and it is observed that the order of reactivity of the zeolites for the conversion of cyclohexane to cyclohexanone and cyclohexanol is CuY > CoY > PbY. It is found that conversion increases by increase of the empty active sites of a zeolite and the formation of cyclohexanol is favored initially, but the cyclohexanol is subsequently converted to cyclohexanone.     

Complex formation constants and thermodynamic parameters for La(III) and Y(III)L-serine complexes

Summary The stoichiometric stability constants for La(III) and Y(III)L-serine complexes were determined by potentiometric methods at different ionic strengths adjusted with NaClO₄ and at different temperatures. The overall changes in free energy (G ^o), enthalpy (H ^o), and entropy (S ^o) during the protonation ofL-serine and that accompanying the complex formation with the metal ions have been evaluated.

---

Komplexbildungskonstanten und thermodynamische Parameter für La(III)- und Y(III)-L-Serin-Komplexe

Zusammenfassung Die stöchiometrischen Komplexbildungskonstanten für La(III)- und Y(III)-L-Serin-Komplexe wurden mittels potentiometrischer Methoden bei verschiedenen Ionenstärken (mit NaClO₄ adjustiert) und bei verschiedenen Temperaturen bestimmt. Die Änderungen in der freien Energie (G ^o), Enthalpie (H ^o) und Entropie (S ^o) während der Protonierung und der Komplexbildung mit den Metallionen wurden ermittelt.