Long-Term Changes in a Heat Exchanger Steel

The steel ASTM A213 P22 is used for superheater outlet header in power plants. During duty cycles lasting over tens of years the temperature is of the order of 545°C and the pressure 125 atm. The microscopic changes in these steels are hard to analyze under working conditions, but they are believed to be responsible for the appearance of creeps in such devices. Investigation of the microscopic modifications will help to predict future failures due to creeps, increasing the reliability and saving a lot of money.We report the investigation of such changes in ASTM A213 P22 steel in use for 30 years as a Superheater header at Haifa power station. The analysis has been carried out using Mössbauer Spectroscopy, X-ray diffraction and optical microscopy. As a result it seems that the morphology and phase change of the carbide phases M₃C/M₇C₃ and M₂₃C₆ are the most prominent changes leading to the material failures.     

Buckling of laminated plates - A simple finite element based on higher-order theory

A four-noded rectangular element with seven degrees of freedom at each node is developed for buckling analysis of laminated plate structures having any number of layers with a constant thickness of individual layers. The displacement model is so chosen that it can explain adequately the parabolic distribution of transverse shear stresses and the non-linearity of in-plane displacements across the thickness. A geometrical stiffness matrix is developed using in-plane stresses. A wide range of plates from thick to thin are examined under uniaxial loading conditions. The results are compared with the existing analytical and numerical solutions. The present formulations confirm its applicability for buckling analysis of a wide range of plates.     

The application of Hölder exponent to traffic congestion warning

In this paper, we applied multifractal modeling techniques to analyze the traffic data collected from the Beijing Yuquanying. The results indicated that multifractal characteristics obviously exist in the traffic system; the degree of fractality of these traffic data tends to increase as the traffic system becomes congested; the Hölder exponent that measures the local rate of fractality may be used as indicators to predict the presence of the traffic congestion.     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%).     

Phase diagram of softly repulsive systems: the Gaussian and inverse-power-law potentials

We redraw, using state-of-the-art methods for free-energy calculations, the phase diagrams of two reference models for the liquid state: the Gaussian and inverse-power-law repulsive potentials. Notwithstanding the different behaviors of the two potentials for vanishing interparticle distances, their thermodynamic properties are similar in a range of densities and temperatures, being ruled by the competition between the body-centered-cubic (bcc) and face-centered-cubic (fcc) crystalline structures and the fluid phase. We confirm the existence of a reentrant bcc phase in the phase diagram of the Gaussian-core model, just above the triple point. We also trace the bcc-fcc coexistence line of the inverse-power-law model as a function of the power exponent n and relate the common features in the phase diagrams of such systems to the softness degree of the interaction.     

The stereocontrolled synthesis of orthogonally protected (R)-α-methyltryptophan

An expedient and highly stereocontrolled route to (R)-α-methyltryptophan and its orthogonally protected analogs has been developed via a four-step conversion from L-alanine in good overall yields. The stereochemistry of the products is confirmed by X-ray diffraction analysis, NMR spectroscopy and optical rotations.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes

The polyethersulfone (PES)-zeolite 3A, 4A and 5A mixed matrix membranes (MMMs) were fabricated with a modified solution-casting procedure at high temperatures close to the glass transition temperatures (T_g) of polymer materials. The effects of membrane preparation methodology, zeolite loading and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. SEM results show the interface between polymer and zeolite in MMMs experiencing natural cooling is better (i.e., less defective) than that in MMMs experiencing immediate quenching. The increment of glass transition temperature (T_g) of MMMs with zeolite loading confirms the polymer chain rigidification induced by zeolite. The experimental results indicate that a higher zeolite loading results in a decrease in gas permeability and an increase in gas pair selectivity. The unmodified Maxwell model fails to correctly predict the permeability decrease induced by polymer chain rigidification near the zeolite surface and the partial pore blockage of zeolites by the polymer chains. A new modified Maxwell model is therefore proposed. It takes the combined effects of chain rigidification and partial pore blockage of zeolites into calculation. The new model shows much consistent permeability and selectivity predication with experimental data. Surprisingly, an increase in zeolite pore size from 3 to 5 Å generally not only increase gas permeability, but also gas pair selectivity. The O₂/N₂ selectivity of PES-zeolite 3A and PES-zeolite 4A membranes is very similar, while the O₂/N₂ selectivity of PES-zeolite 5A membranes is much higher. This implies the blockage may narrow a part of zeolite 5A pores to approximately 4 Å, which can discriminate the gas pair of O₂ and N₂, and narrow a part of zeolites 3A and 4A pores to smaller sizes. It is concluded that the partial pore blockage of zeolites by the polymer chains has equivalent or more influence on the separation properties of mixed matrix membranes compared with that of the polymer chain rigidification.     

Studies on the preparation and exchange reactions of 5-deuterated uracils

The mechanism of base catalyzed proton exchange at the 5-position of uracil and its N-methylated derivatives has been studied. These reactions proceed by addition — elimination across the 5,6-double bond when the 1-nitrogen is substituted with a methyl group, or with anchimeric assistance of the N-1 anion if the 1-position is unsubstituted. The base catalyzed hydrolyses of 1,3-dimethyluracil and 3-methyluracil also appear to proceed through hydrated intermediates. A facile method for an acid catalyzed preparation of 5-deuterated uracils is described as well as a simple and accurate method for analysis of deuterium content.