Selective Voltammetric Detection of Epinephrine in the Presence of Ascorbic Acid at Poly(4-Methoxyphenol)-Modified Electrode1

A gold electrode was modified with electropolymerized films of 4-methoxyphenol by its oxidative polymerization from an alkaline solution by cyclic voltammetry. The modified electrode was then used to determine epinephrine (EP) in the presence of a high concentration of ascorbic acid (AA) by differential pulse voltammetry. The peak positions as well as relative sensitivity EP/AA were affected by the potential window used for the polymerization. For polymerization between 0 and 1.3 V, the peak potentials recorded in a phosphate buffer solution (pH = 7.2) were 516 and 312 mV vs. Ag/AgCl for EP and AA, respectively. In addition the effects of pH and the type of electrolyte on the linearity range and detection limit are investigated. The detection limit for 3s-test is 0.1 M. The high selectivity and sensitivity for epinephrine was found to be due to charge discrimination/analyte accumulation.     

Silver nanoparticle containing silk fibroin bionanotextiles

Development of new generation bionanotextiles is an important growing field, and they have found applications as wound dressings, bandages, tissue scaffolds, etc. In this study, silver nanoparticle (AgNP) containing silk-based bionanotextiles were fabricated by electrospinning, and processing parameters were optimized and discussed in detail. AgNPs were in situ synthesized within fibroin nanofibers by UV reduction of silver ions to metallic silver. The influence of post-treatments via methanol treatment and glutaraldehyde (GA) vapor exhibited changes in the secondary structure of silk. Methanol treatment increased the tensile properties of fibers due to supported crystalline silk structure, while GA vapor promoted amorphous secondary structure. AgNP containing silk fibroin bionanotextiles had strong antibacterial activity against gram-positive Staphylococcus aureus and gram-negative Pseudomonas aeruginosa.     

Synthesis, spectroscopic and DFT investigation of dimethyl-2-(5-acetyl-2,2-dimethyl-4,6-dioxo-1,3-dioxan-5-yl)-3-(triphenylphosphinylidene)succinate

Dimethyl-2-(5-acetyl-2,2-dimethyl-4,6-dioxo-1,3-dioxan-5-yl)-3-(triphenylphosphinylidene)succinate has been synthesized and characterized by elemental analysis, FT-IR and ¹H, ¹³C and ³¹P NMR. The vibrational wavenumbers, gauge including atomic orbital (GIAO) ¹H and ¹³C chemical shift values of title compound in the ground state have been computed with density functional theory method (DFT) and the B3LYP functional. The basis sets used are 6-311G(d,p) and 6-31G(d). The harmonic vibrational wavenumbers have been computed and the scaled values have been compared with the experimental FT-IR spectra. The complete assignments have been performed on basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Most of the computed wavenumbers are found to be in good agreement with the observed spectrum.     

FT-Raman, FT-IR spectra and total energy distribution of 3-pentyl-2,6-diphenylpiperidin-4-one: DFT method

FT-Raman and FT-IR spectra were recorded for 3-pentyl-2,6-diphenylpiperidin-4-one (PDPO) sample in solid state. The equilibrium geometries, harmonic vibrational frequencies, infrared and the Raman scattering intensities were computed using DFT/6-31G(d,p) level. Results obtained at this level of theory were used for a detailed interpretation of the infrared and Raman spectra, based on the total energy distribution (TED) of the normal modes. Molecular parameters such as bond lengths, bond angles and dihedral angles were calculated and compared with X-ray diffraction data. This comparison was good agreement. The intra-molecular charge transfer was calculated by means of natural bond orbital analysis (NBO). Hyperconjugative interaction energy was more during the π–π* transition. Energy gap of the molecule was found using HOMO and LUMO calculation, hence the less band gap, which seems to be more stable. Atomic charges of the carbon, nitrogen and oxygen were calculated using same level of calculation.     

FT‐Raman and FT‐IR spectral and quantum chemical studies on some flavonoid derivatives: Baicalein and Naringenin

In this study, the experimental and theoretical results on the molecular structures of some flavonoid derivatives (Baicalein and Naringenin) are presented. The FT‐IR and FT‐Raman spectra of the compounds have been recorded together for the first time between 4000–400 cm⁻¹ and 3500–5 cm⁻¹ regions, respectively. The molecular geometry and vibrational wavenumbers of the compounds have been also calculated in their ground states by using ab initio HF and DFT/B3LYP functional with 6‐31G(d,p) basis set used in calculations. The calculations were utilized to the C₁ symmetries of the molecules. All calculations were performed with Gaussian 98 software. The obtained vibrational wavenumbers and optimized geometric parameters were seen to be in good agreement with the experimental data. Scale factors have been used in order to compare how the calculated and experimental data are in agreement. Theoretical infrared intensities were also reported. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical and experimental study on metal(II) halide complexes of 1,3-bis(4-pyridyl)propane

We report the results of detailed experimental and theoretical studies on the molecular structure and vibrational spectra of metal(II) halide complexes of 1,3-bis(4-pyridyl)propane [M(N₂C₁₃H₁₄)X₂, where M represents Zn or Hg, and X represents Cl, Br, or I]. The FT–infrared spectra (FT-IR) and FT-Raman spectra of the metal complexes of the 1,3-bis(4-pyridyl)propane molecule in the powder form were recorded between the 400–4000 and 5–3500 cm^?1 regions, respectively. The molecular geometry and vibrational frequencies of the metal complexes of 1,3-bis(4-pyridyl)propane in the ground state were calculated using density functional theory (B3LYP functional) with LANL2DZ and SDD as basis sets. The total energy distributions (TED) among the symmetry coordinates of the normal modes were computed for the low-energy structure of the molecules. Complete vibrational assignments based on the calculated TED values are given.     

DFT simulations, FT-IR, FT-raman, and FT-NMR spectra of 4-(4-chlorophenyl)-1H-imidazole molecules

The FT-IR, FT-Raman and FT-NMR spectra of the compound 4-(4-Chlorophenyl)-1H-imidazole (4-ClPI) was recorded and analyzed. Density functional method has been used to compute optimized geometry, vibrational wavenumbers and NMR spectra of the 4-ClPI. Only one tautomeric form was found most stable by using B3LYP functional with the 6?C311++G(d,p) as basis sets. The detailed interpretation of the vibrational spectra was carried out with the aid of total energy distribution (TED) following the scaled quantum mechanical force field methodology.     

Convergence rate of block-coordinate maximization Burer–Monteiro method for solving large SDPs

Mathematical Programming - Semidefinite programming (SDP) with diagonal constraints arise in many optimization problems, such as Max-Cut, community detection and group synchronization. Although...     

Catalytic wet air oxidation of 2-nitrotoluidine and 2,4-dinitrotoluene

The rates of wet air oxidation of 2-nitrotoluidine and 2,4-dinitrotoluene in the presence of excess oxygen and at different temperatures and oxygen pressures was investigated. Oxidation experiments were carried out at temperatures between 180 and 225^oC and oxygen partial pressures of 1,0-3,0 MPa, in a 280 mL glass vessel-inserted stainless steel reactor. Copper sulfate (CuSO₄ .5H₂O) was used as a catalyst, and the effect of catalyst loading was studied by varying the concentration: 0.75, 2.5 and 25 mg/L as Cu²⁺. Addition of Cu²⁺ ions in the reaction media accelerated 2-nitrotoluidine oxidation nearly ten times even if it exists in trace amount in the reaction medium (0.75 ppm Cu²⁺). Unfortunately copper did not show catalytic effect for the oxidation of 2,4-dinitrotoluene. This revised version was published online in August 2006 with corrections to the Cover Date.     

FT‐Raman,FT‐IR spectral and DFT studies on 6, 8‐dichloroflavone and 6, 8‐dibromoflavone

In this study, experimental and theoretical vibrational spectral results of the molecular structures of 6,8‐dichloroflavone (6,8‐dcf) and 6,8‐dibromoflavone (6,8‐dbf) are presented. The FT‐IR and FT‐Raman spectra of the compounds have been recorded together between 4000 and 400 cm⁻¹ and 3500–5 cm⁻¹ regions, respectively. The molecular geometry and vibrational wavenumbers of 6,8‐dcf and 6,8‐dbf in their ground state have been calculated by using DFT/B3LYP functional, with 6‐31 + + G(d,p) basis set used in calculations. All calculations were performed with Gaussian03 software. The obtained vibrational wavenumbers and optimized geometric parameters were seen to be in good agreement with the experimental data. Scale factors have been used in order to compare how the calculated and experimental data are in agreement. Theoretical infrared intensities are also reported. Copyright © 2009 John Wiley & Sons, Ltd.