New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

Multicomponent quantitative resolution of binary mixtures by using continuous wavelet transform

Continuous 1-dimensional wavelet transform (WT) was applied to the quantitative analysis of a vitamin combination of thiamine hydrochloride (THI) and pyridoxine hydrochloride (PYR) with strongly overlapping signals. Absorbance data from the UV-Vis absorption spectrum of width 1150 were subjected to Gauss1 and Gauss2 WTs. Because of its flexibility, data processing, and its high signal amplitude, the continuous WT method is a powerful tool for analysis of multicomponent mixtures. By measuring the amplitude signals corresponding to the selected zero-crossing points of the transformed signal, we obtained the calibration curve. The validation of the calibration graphs was confirmed with different mixtures of THI and PYR at various concentration ratios. A brief explanation of the continuous wavelet method is given. MATLAB 6.5 software was used to perform the calculations. The results of our study were compared with those obtained by spectroscopic, chemometric, and liquid chromatographic methods, and good agreement was found.     

Preconcentration of cobalt using Amberlyst 36 as a solid-phase extractor and its determination in various environmental samples by flame atomic absorption spectrometry

A new and simple column-solid-phase extraction method has been developed to separate and preconcentrate trace cobalt in water and soil prior to its determination by flame atomic absorption spectrometry (FAAS). Different factors such as pH of sample solution, sample volume, amount of resin, flow rate of aqueous solution, volume and concentration of eluent, and matrix effects for preconcentration were optimized. Under optimized experimentally established conditions, an analytical detection limit of 0.44?µg?L^?1, precision (RSD) of 1.9%, enrichment factor of 200, and capacity of resin of 82?mg?g^?1 were obtained. The method was applied for cobalt determination by FAAS in tap water, natural drinking water, soil, and roadside dust samples. The accuracy of the method is confirmed by analysing standard reference material (Montana Soil, SRM 2711).     

Optimization of Electrical Conductivity of SA-graphene Nanocomposites Using Response Surface Methodology

Synthesis and characterization of 4-{(E)-[(5-bromo-2-hydroxyphenyl)methylidene]amino}-N-carbamimidoylbenzene-1-sulfonamide(SA) and its composites with graphene(SA-GF) were performed. Compound SA and SA-GF were characterized by FTIR and ¹H NMR. The GF dispersion in the composites was analyzed by means of scanning electron microscopy(SEM) for morphology. Thermal properties of SA and nanocomposites were investigated using differential thermal analysis(DTA) and thermogravimetric analysis(TGA). The optimum electrical conductivity of the new sulfonamide-based Schiff base was determined to be 1.78×10^–5 S/cm at a frequency of 9923 Hz, an applied voltage of –19 V, a mass fraction of 9.38% for graphene loading using a central composite design in the response surface methodology. The significance of the selected parameters(frequency, voltage and GF amount) in the model was determined by the analysis of variance(ANOVA). The results showed that frequency and graphene loading represent important model terms and have considerable effects on the conductivity of SA.     

RNA-sensitive N-isopropylacrylamide/vinylphenylboronic acid random copolymer

Random copolymers of N-isopropylacrylamide (NIPA) and 4-vinylphenylboronic acid (VPBA) were obtained by solution polymerization using 2,2′-azobisizobutyronitrile as the initiator in ethanol at 65 °C. NIPA-co-VPBA copolymer exhibited both temperature- and pH-sensitivity. Thermally reversible phase transitions were observed both in the acidic and alkaline pH region for the copolymers produced with different VPBA/NIPA feed ratios. The pH dependency of the lower critical solution temperature (LCST) was stronger for the copolymers produced with higher VPBA feed concentrations. RNA was selected as a model biomolecule having vicinal-diol and amino groups that were potentially reactive with the boronic acid groups of NIPA-co-VPBA copolymer. The effect of RNA concentration on the LCST of NIPA-co-VPBA copolymer was investigated in aqueous media at different pHs. Although no significant effect was observed at pH 4, 7 or 10.5, the LCST decreased linearly with increasing RNA concentration at a pH approximately equal to the pK_a of boronic acid. This behavior was explained by considering the binding of RNA onto the copolymer chains to occur via two types of complex formation. For the formation of these complexes, the amino and vicinal-diol groups of RNA should react with the boronic acid groups of the copolymer in the tetrahedral anionic form. The results indicated that NIPA-co-VPBA copolymer could be utilized as a new reagent for the determination of RNA concentration in aqueous media. The proposed method was valid for the RNA concentration range of 0–4 g · mL⁻¹.

The schematical representation of the possible interactions between NIPA-co-VPBA copolymer and RNA. (A) A typical structure of single-stranded RNA. (B) Tetrahedral anionic form of boronic acid groups. (C) The interaction between the amino groups of the unpaired bases of RNA and the boronic acid groups of the copolymer. (D) Cyclic borate ester formation by the interaction between vicinal diol groups located at the 3′-end of RNA and boronic acid groups of the copolymer.     

Catalytic air oxidation of manganese in synthetic waters

An attempt was made to study the oxidation of manganese by air in synthetic waters. A series of batch experments were performed at differnet values of concentration, temperature and pH. Unoxidized manganese in the solution was determined by formaldoxime spectrometric method. Results of these studies indicated that the air oxidation of manganese soluble in water can be effectively performed in basic media and that oxidation yield increasedwith an increase in pH and concentration. The yield was very high in the presence of manganese dioxide, sepiolite or clinoptilolite in solution and, the oxidation was almost completed especially at high values of pH and concentration. The reaction was found to be first order with respect to Mn²⁺ with a very low activation energy. A yield of 62% was obtained for the air oxidation of wastewater taken from the treatment plant of Corum Municipality.     

Synthesis and Properties of Thiophene and Dithiin Functionalized Tetrathiafulvalenes

Abstract

Syntheses of two analogues of tetrathiafulvalene (TTF), fused to 1,4-dithiin and thiophene rings, substituted with thiophene moieties, have been illustrated. The syntheses were accomplished through the reaction of a 1,8-diketone with phosphorus pentasulfide or Lawesson's reagent in boiling dry toluene. Conversion of the thioketones to their the oxo forms with mercury (II) acetate, was followed by self-coupling in freshly distilled boiling triethyl phosphite. Attempts for their electro-polymerizations through the thiophene groups at the peripherals were unsuccessful. Computational chemistry studies revealed that the thiophene groups did not exhibit enough spin densities to perform polymerization.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis and Metal Ion Recognition Properties of a Novel Chiral Calix[4](azoxa)crown-7

A novel chiral calix[4](azoxa)crown-7 (9) has been synthesized and its metal ion recognition properties investigated. The starting reagents, chiral diamine 5 and calix[4]arene diacid chloride derivative 8, were prepared according to literature methods. ¹H and ¹³C NMR data show that 9 exists in a cone conformation. In liquid–liquid extraction experiments, 9 exhibits selectivity for Li⁺ among the other alkali metals and a good extraction ability for transition metal cations, suggesting its potential use in different fields, such as a sensor for ions as well as for chiral molecules.     

Performing thermodynamic analysis by simulating the general characteristics of the two-spool turbojet engine suitable for drone and UAV propulsion

Journal of Thermal Analysis and Calorimetry - This study presents determining performance parameters as well as thermodynamic analysis through certain design parameters of a two-spool turbojet...