Simultaneous determination of Cd(II), Cu(II) and Pb(II) in surface waters by solid phase extraction and flow injection analysis with spectrophotometric detection

A method for heavy metal monitoring using spectrophotometric detection is presented. Traces of Cu(II), Pb(II) and Cd(II) at the low microg l(-1) level can be determined simultaneously after both selective removal of metal interferences and preconcentration using 'extraction chromatographic resins'. Lewatit TP807'84, which contains di(2,4,4-trimethylpentyl)phosphinic acid as active component, was used as solid adsorbent. Two minicolumns containing this resin were used: one at pH 3.2 for the removal of interferences, such as Zn(II) and Fe(III), and the other at pH 5.5 for the selective preconcentration of the target analytes. Spectrophotometric determination used FIA methodology with sulfarsazene as chromogenic reagent and partial least-squares multivariate calibration. The method was successfully applied to the analysis of surface waters from the Llobregat river and ground water samples from wells in the Guadiamar basin. Accuracy, expressed in terms of recoveries, was in the range 80-120% and relative standard deviations were below 10%.     

Separation of fuels,heavy fractions,and crude oils into compound classes: A review

Practically all the conventional chromatographic techniques are used in the characterization of the highly complex mixtures of organic compounds occurring in fuels, heavy fractions, and crude oils. This paper surveys the techniques employed for class determination, preparative fractionation of the main classes, and determination of subgroups after class fractionation.     

Coordinating ability of the heterocycles 1,3-dithia-2-arsa and stiba-cyclopentanes toward sulfur containing ligands,part I. Dialkyl-dithiocarbamate complexes

Summary The heterocyclic compounds ClMS₂ (CH₂)₂ (M = As, Sb) are tested by first time as source of starting materials in the synthesis of complexes. The preparation and characterization of heterocyclic dithiocarbamatesR ₂NCS₂ MS₂ (CH₂)₂, (M = As, Sb;R =Me,Et,i-Pr) is reported. Spectroscopic and analytical data suggest a bidentate behavior of the dithiocarbamate entity and the presence of aMS₄ core.

---

Die Koordinationsfähigkeit der Heterocyclen 1,3-Dithia-2-arsa- und-stiba-cyclopentan gegenüber Schwefel enthaltenden Liganden, I. Dialkyldithiocarbamat-Komplexe

Zusammenfassung Die heterocyclischen Verbindungen ClMS₂ (CH₂)₂ (M = As, Sb) werden erstmals als Quelle für Ausgangsmaterial zur Synthese von Komplexen herangezogen. Es wird über die Herstellung und Charakterisierung der heterocyclischen DithiocarbamateR ₂NCS₂ MS₂ (CH₂)₂ (M = As, Sb;R =Me,Et,i-Pr) berichtet. Spektroskopische und analytische Daten sprechen für ein bidentates Verhalten der Dithiocarbamat-Einheit und der Präsenz einerMS₄-Anordnung im Komplex.

     

Cobalt-mediated approach for the synthesis of terpene-based hybrids

[structure: see text] Dicobalt-beta-pinene hybrids of types I and II have been prepared using a Nicholas reaction between propargyl derivatives, obtained from commercial (1R)-(-)-myrtenal, and different aromatic nucleophiles. The method is suitable for the preparation of densely functionalized bio-organometallic natural product-based hybrids, as demonstrated by the preparation of a beta-pinene-neoclerodane hybrid.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 2. Potentiometric e-tongue for the determination of alkaline ions

An intelligent, automatic system based on an array of non-specific-response chemical sensors was developed. As a great amount of information is required for its correct modelling, we propose a system generating it itself. The sequential injection analysis (SIA) technique was chosen as it enables the processes of training, calibration, validation and operation to be automated simply. Detection was carried out using an array of potentiometric sensors based on PVC membranes of different selectivity. The diluted standard solutions needed for system learning and response modelling are automatically prepared from more concentrated standards. The electrodes used were characterised with respect to one and two analytes, by means of high-dimensionality calibrations, and the response surface of each was represented; this characterisation enabled an interference study of great practical utility. The combined response was modelled by means of artificial neural networks (ANNs), and thus it was possible to obtain an automated electronic tongue based on SIA. In order to identify the ANN which provided the best model of the electrode responses, some of the network's parameters were optimised and its usefulness in determining NH₄⁺, K⁺ and Na⁺ ions in synthetic samples was then tested. Finally, it was used to determine these ions in commercial fertilisers, the obtained results being compared with reference methods.     

Precise and accurate quantitative C NMR with reduced experimental time

In order to detect small variations in ¹³C isotopomers concentrations, high sensitivity, accuracy and precision have to be achieved. To assess such criteria, when using ¹³C NMR, ¹³C bi-labelled ethanol has been proposed as a molecular probe. Advantage has been taken of the pre-established structural relationship between the peak areas of the ¹³C NMR spectrum of this molecule, i.e. the ratio of signal areas is set to a fixed value. It is shown that the quality performance, required by quantitative ¹³C NMR spectroscopy, is not affected by a large reduction of the repetition delay using relaxation reagents.     

Spectroscopic probing of the effect of alkanols on the properties of the head group region in reverse micelles of AOT-heptane-water

The effects of addition of alkanols (ethanol, n-hexanol, and 3-ethyl-3-pentanol) on the micropolarity and microviscosity of the head group region in reverse micelles of AOT-heptane-water have been investigated by fluorescence probing methods (ANS fluorescence yield and TMADPH fluorescence anisotropy), complemented by the use of the solvatochromic probe E(T)(30) in absorption spectroscopy. For all the alkanols considered, ANS fluorescence in AOT reverse micelles (at W=3) is quenched by additive incorporation, being the effect elicited almost independent of the alkanol chain length and topology. As sensed by the E(T)(30) parameter, the micropolarity of the micelle surface increases, remains unmodified, and decreases upon addition of ethanol, 3-ethyl-3-pentanol, and hexanol, respectively. While ethanol barely modifies the fluorescence anisotropy of TMADPH, 3-ethyl-3-pentanol and n-hexanol addition strongly decrease it. The similarity of the tendencies of ANS data to TMADPH anisotropies and the differences between ANS data and E(T)(30) values would indicate that, at least for 3-ethyl-3-pentanol and n-hexanol, microviscosity, rather than micropolarity, must be considered to interpret the effect of the alkanols upon the fluorescent behavior of ANS.     

Alkaline Earth–Olefin Complexes with Secondary Interactions

Strontium and calcium (alkaline earth: Ae) olefin complexes stabilised by secondary Ae???F?C and β‐agostic Ae???H?Si interactions are presented. Olefin coordination onto the alkaline earths is plain in the solid state, and it is thermodynamically favoured over the coordination of THF. The existence of the Ae???olefin interactions is corroborated by solution NMR data and DFT computations. The coordination mode of the olefin varies with steric effects and, if enforced, olefin dissociation can be compensated by the other non‐covalent interactions, as supported by DFT computations.     

Separation of intact proteins on porous layer open tubular (PLOT) columns

Porous layer open tubular (PLOT) polystyrene divinylbenzene columns have been used for separating intact proteins with gradient elution. The 10 μm I.D. × 3 m columns were easily coupled to standard liquid chromatography–mass spectrometry (LC–MS) instrumentation with commercially available fittings. Standard proteins separated on PLOT columns appeared as narrow and symmetrical peaks with good resolution. Average peak width increased linearly with gradient time (t_G) from 0.14 to 0.33 min (t_G 20 and 120 min, respectively) using a 3 m column. With shorter columns, peak widths were larger and increased more steeply with gradient time. Theoretical peak capacity (n_c) increased with column length (tested up to 3 m). The n_c increased with t_G until a plateau was reached. The highest peak capacity achieved (n_c = 185) was obtained with a 3 m column, where a plateau was reached with t_G 90 min. The within- and between column retention time repeatabilities were below 0.6% and below 2.5% (relative standard deviation, RSD), respectively. The carry-over following injection of 0.5 ng per protein was less than 1.1%. The retention time dependence on column temperature was investigated in the range 20–50 °C. Proteins in a skimmed milk sample were separated using the method.