Synthesis and characterization of surface-cyanofunctionalized poly (N-isopropylacrylamide) latexes

 A series of P[N-isopropylacrylamide (NIPAM)] latexes with different contents of cyano groups were successfully prepared by either seeded or shot-growth polymerizations of an aqueous solution containing acrylonitrile (AN) onto a seed P[NIPAM] latex, respectively, and further characterized by FT-IR, ¹H-NMR, elemental analysis, as well as by quasielastic light scattering (QELS) and scanning electron microscopy (SEM). All prepared surface-cyanofunctionalized P[NIPAM] latexes exhibited the same range of lower critical solution temperature (LCST) as a pure P[NIPAM] latex. The shot polymerization process proved more efficient at yielding cyano derivatized latexes than the seeded polymerization technique. The amount of incorporated cyano groups onto the particles was determined with a good correlation both by ¹H-NMR and elemental analysis. The higher the amount of initially introduced AN monomer in the reaction mixture, the more cyano groups were incorporated onto the particles. The surface of the particles with high content of cyano groups appeared quite rough by SEM in comparison with that of the pure P[NIPAM] particles. Received: 25 February 1998 Accepted: 23 June 1998     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

Strategy for the synthesis of polymeric supports with hydrazone linkers for solid-phase alkylation of ketones and aldehydes

A new approach to polymeric supports useful for the immobilization of aldehydes and ketones via hydrazone linkers is reported. The new strategy gives supports with better properties and is effective for the synthesis of all supports previously used for the alkylation of ketones anchored as hydrazones. In contrast to other approaches, the new strategy also provided a polymer with an economical C2 spacer linker. The supports were used for immobilization of ketones 3-pentanone, acetone, N-benzylpiperidone, and aldehydes hexanal and 3-phenylpropanal in the form of their hydrazones. The polymer-supported hydrazones were subjected to alpha-alkylation (LDA/RX) followed by acidic, reductive, or oxidative cleavage/workup procedures to provide alpha-alkylated aldehydes or ketones as well as corresponding primary amines, alcohols, nitriles or acids.     

A Mesoionic Diselenolene Anion and the Corresponding Radical Dianion

Dichalcogenolenes are archetypal redox non-innocent ligands with numerous applications. Herein, a diselenolene ligand with fundamentally different electronic properties is described. A mesoionic diselenolene was prepared by selenation of a C2-protected imidazolium salt. This ligand is diamagnetic, which is in contrast to the paramagnetic nature of standard dichalcogenolene monoanions. The new ligand is also redox-active, as demonstrated by isolation of a stable diselenolene radical dianion. The unique electronic properties of the new ligand give rise to unusual coordination chemistry. Thus, preparation of a hexacoordinate aluminum tris(diselenolene) complex and a Lewis acidic aluminate complex with two ligand-centered unpaired electrons was achieved.     

The high-energy critical minimum in elastic electron scattering by argon

The position of high-energy critical minimum in elastic electron-argon scattering was investigated both experimentally and theoretically. Differential cross-sections (DCSs) were measured as a function of both incident electron energy (40-150 eV) and scattering angle ( ), in small steps around the critical minimum. The position of the high-energy critical minimum in elastic electron-argon scattering was experimentally found to be at eV and . To cover the energy and angular ranges of the present experiment, relevant relativistic ab initio calculations were carried out, based on the Dirac-Hartree-Fock method with the exchange calculated exactly. Target polarization is described by an ab initio potential taken from relativistic polarized orbital calculations. The calculated position of the high-energy critical minimum is eV, . It was shown that even slight difference of fixed scattering angle close to the critical point could affect significantly the energy dependent DCS. Discussion of behavior of DCS in the vicinity of the critical minimum was performed including convolution analysis in both energy and angle.Received: 31 October 2003, Published online: 20 April 2004PACS: 31.15.Ar Ab initio calculations - 34.80.Bm Elastic scattering of electrons by atoms and molecules     

Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999     

Electrical conductivity and thermoelectric power of liquid selenium doped with thallium and indium

The temperature dependence of the electrical conductivity and thermoelectric power of liquid selenium with thallium and indium additives have been studied. Large variations appear in the electrical conductivity and thermoelectric power, where Tl and In additives favourp-type conduction.     

Continuous-wave far-infrared ESR spectrometer for high-pressure measurements

We present a newly-developed microwave probe for performing sensitive high-field/multi-frequency electron spin resonance (ESR) measurements under high hydrostatic pressures. The system consists of a BeCu-made pressure-resistant vessel, which accommodates the investigated sample and a diamond microwave coupling window. The probe’s interior is completely filled with a pressure-transmitting fluid. The setup operates in reflection mode and can easily be assembled with a standard oversized microwave circuitry. The probe-head withstands hydrostatic pressures up to 1.6 GPa and interfaces with our home-built quasi-optical high-field ESR facility, operating in a millimeter/submillimeter frequency range of 105–420 GHz and in magnetic fields up to 16 T. The overall performance of the probe was tested, while studying the pressure-induced changes in the spin-relaxation mechanisms of a quasi-1D conducting polymer, KC₆₀. The preliminary measurements revealed that the probe yields similar signal-to-noise ratio to that of commercially available low-frequency ESR spectrometers. Moreover, by observing the conduction electron spin resonance (CESR) linewidth broadening for KC₆₀ in an unprecedented microwave frequency range of 210–420 GHz and in the pressure range of up to 1.6 GPa, we demonstrate that a combination of high-pressure ESR probe and high-field/multi-frequency spectrometer allows us to measure the spin relaxation rates in conducting spin systems, like the quasi-1D conductor, KC₆₀.     

Hydrophilic magnetic polymer latexes. 1. Adsorption of magnetic iron oxide nanoparticles onto various cationic latexes

With a view to preparing monosized hydrophilic functional magnetic latex particles based on a two-step strategy using anionic iron oxide and cationic polymer latexes, the adsorption step was systematically investigated for a better control of the subsequent encapsulation step. The iron oxide nanoparticles were first obtained according to the classical precipitation method of ferric and ferrous chloride salt using a concentrated sodium hydroxide solution, whereas the polystyrene (PS), P(S/N-isopropylacrylamide (NIPAM)) core–shell and PNIPAM latexes were produced via emulsion and precipitation polymerizations, respectively. The polymer and inorganic colloids were then characterised. The adsorption of iron oxide nanoparticles onto the three types of polymer latexes via electrostatic interaction was studied as a function of iron oxide particle concentration, charge density and the cross-linking density of the hydrophilic layer. The maximum amounts of magnetic nanoparticles adsorbed onto the various latexes were found to increase in the following order: PS < P(S/NIPAM) < P(NIPAM). This significant difference is discussed by taking into account the charge distribution in the hydrogel layer and diffusion phenomena inside the cross-linked hydrophilic shell. Received: 28 December 1998 Accepted in revised form: 15 April 1999     

Ruthenium Olefin Metathesis Catalysts Featuring N-Heterocyclic Carbene Ligands Tagged with Isonicotinic and 4-(Dimethylamino)benzoic Acid Rests: Evaluation of a Modular Synthetic Strategy

A modular and flexible strategy towards the synthesis of N-heterocyclic carbene (NHC) ligands bearing Brønsted base tags has been proposed and then adopted in the preparation of two tagged NHC ligands bearing rests of isonicotinic and 4-(dimethylamino)benzoic acids. Such tagged NHC ligands represent an attractive starting point for the synthesis of olefin metathesis ruthenium catalysts tagged in non-dissociating ligands. The influence of the Brønsted basic tags on the activity of such obtained olefin metathesis catalysts has been studied.