Polyelectrolyte complexes. VI. Polycation structure,polyanion molar mass,and polyion concentration effects on complex nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate)

The formation and characterization of some interpolyelectrolyte complex (IPEC) nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate) (NaPAMPS), as a function of the polycation structure, polyanion molar mass, and polyion concentration, were followed in this work. Poly(diallyldimethylammonium chloride) and two polycations (PCs) containing (N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride) units in the backbone (PCA₅ and PCA₅D₁) were used as starting polyions. The complex stoichiometry, (n^?/n⁺)_iso, was pointed out by optical density at 500 nm (OD₅₀₀), polyelectrolyte titration, and dynamic light scattering. IPEC nanoparticle sizes were influenced by the polycation structure and polyanion molar mass only before the complex stoichiometry, which was higher for the more hydrophilic polycations (PCA₅ and PCA₅D₁) and for a higher NaPAMPS molar mass, and were almost independent of these factors after that, at a flow rate of the added polyion of about 0.28 mL × (mL PC)^?1 × h^?1. The IPEC nanoparticle sizes remained almost constant for more than 2 weeks, both before and after the complex stoichiometry, at low concentrations of polyions. NIPECs as stable colloidal dispersions with positive charges in excess were prepared at a ratio between charges (n^?/n⁺) of 0.7, and their storage colloidal stability, as a function of the polycation structure and polyion concentration (from 0.8 to ca. 7.8 mmol/L), was demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2495–2505, 2004     

Electroacoustic oscillations of aluminum oxide particles in the thermal plasma

The frequencies of natural electroacoustic oscillations of aluminum oxide particles in a laminar disperse aluminum flame are determined experimentally using the capacitive method. A computational model is proposed for estimating the natural frequency of oscillations of charged particles in the smoky plasma taking into account the Doppler effect. It is shown that, for a natural frequency of oscillations of 51 kHz, two measured maxima at frequencies of 30 and 60 kHz in the oscillation spectrum correspond to the Doppler frequencies.     

On the Seneta Sequences

In this paper, we prove some properties of the Seneta sequences and functions, and in particular we prove a representation theorem in the Karamata sense for the sequences from the Seneta class SOc.     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

Cobalt(II) Chloride Complex Formation in Acetamide–Calcium Nitrate Tetrahydrate Melts

The absorption spectra of Co(II) chloride complexes, containing variable concentrations of chloride ligand, in a molten mixture of 80 mol% acetamide–20 mol% calcium nitrate tetrahydrate, were studied at 313, 333, 353, and 363 K, in the wavelength range 400-800 nm. The melt contains three possible ligands (CH₃CONH₂, H₂O, and NO₃ ^-) for competition with added chloride ligand. Addition of chloride caused a shift of the absorption maximum of octahedral cobalt(II) nitrate towards lower energies and pronounced changes in the shape of the initial spectrum of cobalt(II) nitrate. The effect of temperature changes on the molar absorption coefficient of the Co(II) species was dependent on the chloride concentration and was attributed to the structural changes occurring in the cobalt(II) species. The STAR and STAR FA programs were applied to identify the complex ionic species and to calculate the stability constants of Co(II) complexes formed in this solvent. The results indicate the highest probability of formation of the following complex species: Co(NO₃)₄ ^2-, Co(NO₃)₂Cl₂ ^2-, and CoCl₄ ^2-. Stability constants of each complex were presented for the equilibria occurring at 313, 333, 353, and 363 K. Distribution of the Co(II) species was also calculated over the ranges of chloride concentration and temperature investigated.     

Ferrocene Compounds. XXXI. Structure of 3-Ferrocenylpropanoic Acid

The title compound was prepared by modified procedure and characterized by means of IR, [¹H] and [¹³C] NMR spectroscopy. The structure was also determined by a single-crystal X-ray diffraction (XRD). 3-Ferrocenylpropanoic acid crystallizes as orange prisms in the triclinic space group P with a = 7.645(1) Å, b = 7.953(1) Å, c = 9.961(1) Å, = 81.67(1), = 68.43(1), = 83.76(1), V = 556.3(1) ų, Z = 2, R = 0.0435. In the ferrocene skeleton, Fe-C distances are in the range 2.033(2)–2.052(2) Å and C C distances in the range 1.412(5)–1.431(3) Å. The angle defined by ring centers and Fe atom is 177.7(1). The cyclopentadienyl rings are twisted from the eclipsed conformation by 8.3(2) (average value). In the structure was observed strong intermolecular hydrogen bond of 2.670(3) Å forming cyclic dimers of the R₂ ² (8) type.     

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.     

Spectroscopic investigation of β-cyclodextrin -metoprolol tartrate inclusion complexes

Aqueous-solution complexes of β-cyclodextrin (β-CD) with metoprolol tartrate (MET) have been analysed with ¹H NMR and UV–vis spectroscopy. With ¹H NMR a [1:1] stoichiometry could be established for the β-CD-MET complex while its stability constant was determined with UV–vis spectroscopy. Powder diffraction data of a polycrystalline sample of the β-CD-MET complex show that a novel product has been formed, likely to be a β-CD-MET [1:1] inclusion complex. Also Hyperchem MM+ molecular-dynamics results suggest an inclusion complex and from ¹H NMR data it is inferred that probably the MET is docked in the CD with the formers methoxyethyl-benzene moiety in front. Mihaela Toma is Socrates/Erasmus student at UNED Madrid     

Novel approach to the synthesis of 3-acyl substituted indolizines. The synthesis of 3-(indolizinyl-2)alanine and 4-(indolizinyl-3) homoalanine derivatives

A novel approach to the synthesis of 3-acylindolizines and the transformations of some acids into tryptophane analogues are described. Reaction of ethyl 2-pyridinylacetate and methyl 2-quinolinylacetate with N-trifluoroacetyl-5-bromo-4-oxonorvaline methylester led to N-trifluoroacetyl-3-(1-ethoxycarbonylindolizinyl-2) alanine methyl ester and N-trifluoroacetyl-3-(3-methoxycarbonylpyrrolo [1,2-a]quinolinyl-2) alanine methyl ester, respectively. Treatment of ethyl 2-pyridinylacetate and 2-pyridinylacetonitrile, first with N,N-dimethylformamide dimethyl acetal (DMFDMA), followed by reaction with phenacyl bromide, gave the corresponding 3-benzoylindolizines, while the reaction of ethyl 2-pyridinylacetate and 2-pyridinylacetonitrile with DMFDMA, followed by treatment with (S)-N-trifluoroacetyl-5-bromo-4-oxonorvaline methyl ester, gave the corresponding N-trifluoroacetyl-4-oxo-4-(indolizinyl-3)homoalanine methyl esters.