The evolution of the viscoelastic retardation spectrum during the development of an epoxy resin network

The evolution of the viscoelastic behavior of an epoxy resin at various stages of curing has been followed with the changes in the retardation spectrum. The creep J(t) and recoverable creep compliance J_r(t) curves of the neat epoxy resin Epon l00lF (Shell) were determined at temperatures between 30 and 77°C. The viscosity decreased over 8 orders of magnitude as the temperature was increased. Specimens with eight stages of network development were prepared by reacting all of the epoxy resin's oxirane rings with amine hydrogens from varying ratios of a monofunctional amine (methyl aniline) and a tetrafunctional amine 4,4′-diamino diphenyl sulfone (DDS). Preparations in which 25, 35, and 40% DDS were used did not result in a molecular network, so they were viscoelastic liquids. With 45% DDS, the product had a nascent network and was judged to be just beyond the point of incipient gelation. The remaining preparations from 0.50, 0.60, 0.70, and 1.0 DDS yielded tighter less compliant molecular networks. The creep and recoverable compliance curves were measured over a range of temperatures above the glass transition temperature, T_g. They were reduced to T_g, and retardation spectra L(ln τ) were calculated.     

Comparison of short range interactions in nematic liquid crystals A 2H-NMR study of 5CB-d19 as a solute

Previous studies using dideuterium as a solute have demonstrated the importance for orientation of the interaction between the solute molecular quadrupole moment and the average electric field gradient present in liquid crystals. With the aim of learning about additional orientational mechanisms, we have studied the temperature dependence of the ²H-NMR spectra of the liquid crystal 5CB-d₁₉ as the solute in three liquid crystal mixtures: 55 wt % 1132/EBBA, 56·5 wt % 1132/EBBA and 70 wt % 5CB/EBBA. In these mixtures, the contribution from the environment to the average electric field gradient at the ²H nucleus of dideuterium is zero. The spectra of 5CB-d₁₉ in the mixtures 55 wt % 1132/EBBA and 56·5 wt % 1132/EBBA are equivalent, but are different from those in 70 wt % 5CB/EBBA. The spectra of 5CB in 55 wt % 1132/EBBA and 70 wt % 5CB/EBBA are analysed using two different models for the short range potential, and param eters of the models are used to compare the potentials in the different mixtures. For a given spectral splitting of the chain C₁ deuteron, the reduced short range potential is the same in all three mixtures studied. The spectral differences observed are a consequence of different nematic-isotropic phase transition temperatures combined with the effect of trans/gauche-isomerization in the hydrocarbon chain.     

Physical aging of a polyetherimide: Creep and DSC measurements

Creep and differential scanning calorimetry (DSC) measurements have been used to study the physical aging behavior of a polyetherimide. Isothermal aging temperatures ranged from 160°C to T_g with aging times ranging from 10 min to 8 days. The only measurable effect of physical aging on the short-time creep curves is a shift of the creep compliance to longer times. Andrade plots of the compliance versus the cube root of time are linear at short times with the slope β decreasing with increasing aging time to a constant value once equilibrium is reached. Log β³ is related directly to the degree to which the creep curves shift to longer times with physical aging, and is used in this work as a measure of physical aging. A reduced curve of log β³ versus log aging time is obtained for the aging temperatures investigated by appropriate vertical and horizontal shifts. The enthalpy change during aging increases linearly with the logarithm of the aging time, t_a, leveling off at equilibrium at values which increase with decreasing aging temperature. Hence, both nonequilibrium and equilibrium temperature shift factors can be calculated from the DSC data. Good agreement is observed between the equilibrium temperature shift factors obtained from the creep and DSC data. The temperature dependence of the nonequilibrium temperature shift factors is found to be an order of magnitude smaller than that of the equilibrium shift factors. The time scales to reach equilibrium for enthalpy and for mechanical measurements are found to be the same within experimental error. © 1995 John Wiley & Sons, Inc.     

Consistency of decision processes

If a statistical or a voting decision procedure is used by several subpopulations and if each reaches an identical conclusion, then one might expect this conclusion to be the outcome for the full group. It is shown that this property fails to hold for large classes of decision procedures. The geometric reasons why the consistency does not hold are described. A general theorem is given to characterize the procedures that satisfy this property of weak consistency.This research was supported in part by NSF Grant IRI-8803505 and a Guggenheim Fellowship. Also, the author thanks a referee for some comments that stimulated certain revisions.     

Quantum relativistic action at a distance

A well-known relativistic action at a distance interaction of two unequal masses is altered so as to yield purely Newtonian radial forces with fixed particle rest masses in the system center-of-momentum inertial frame. Although particle masses experience no kinematic mass increase in this frame, speeds are naturally restricted to less than the speed of light. We derive a relation between the center-of-momentum frame total Newtonian energy and the composite rest mass. In a new proper time quantum formalism, we obtain an L²(R⁴ R⁴, C) Hilbert space by varying individual particle rest masses. We propose the use of density operators, recognizing that the auxiliary proper time parameter is not an observable. The quantum formalism is applied to our altered version of the relativistic harmonic oscillator. Our generalized coherent states yield four-dimensional wave packets which follow the correct classical world lines. Appendices contain reviews of classical Hamiltonian reparametrization (incorporating our notion of manifest covariance), and a comparison of this work with the literature.     

Reactions of tetrahydro-as-triazine-3(2H)-thiories with α, β-difunctional compounds

The results of allowing tetrahydro-as-triazine-3(2H)-thiones to react with various α,β-diiunctional compounds, such as, α-bromoethyl p-toluenesulfonate, chloroacetaldehyde, α-bromophenylacet-uldehyde, phenaeyl bromide, chloroacetonitrile, α-bromophenylaeelonitrile, and α-cyanobenzyl p-toluenesulfonate are discussed. These condensations give either a 5H-thiazolo[3,2-b]-as-triazine or a 2H-thiazolo[2,3-c]-as-triazine.     

Ion-pair formation in aqueous solutions of silver nitrate: A Raman and infrared spectral study

A detailed study of the Raman and infrared spectral line shapes and line parameters of aqueous solutions (both H₂O and D₂O) of AgNO₃ is interpreted in terms of an equilibrium between “free” ions and the ion pair Ag⁺NO ₃ ^? . An association constant of 0.1M ^?1 was obtained from both the 717 cm^?1 and 1047 cm^?1 line intensities. Spectral features suggest a significant degree of covalence in the interaction. A C_s(σ_V) model with Ag⁺ above the plane of NO ₃ ^? is consistent with the data.     

Hydraulic conductivity of rock fractures

The flow of a single-phase fluid through a rough-walled rock fracture is discussed within the context of fluid mechanics. The derivation of the cubic law is given as the solution to the Navier-Stokes equations for flow between smooth, parallel plates - the only fracture geometry that is amenable to exact treatment. The various geometric and kinematic conditions that are necessary in order for the Navier-Stokes equations to be replaced by the more tractable lubrication or Hele-Shaw equations are studied and quantified. In general, this requires a sufficiently low flow rate, and some restrictions on the spatial rate of change of the aperture profile. Various analytical and numerical results are reviewed pertaining to the problem of relating the effective hydraulic aperture to the statistics of the aperture distribution. These studies all lead to the conclusion that the effective hydraulic aperture is less than the mean aperture, by a factor that depends on the ratio of the mean value of the aperture to its standard deviation. The tortuosity effect caused by regions where the rock walls are in contact with each other is studied using the Hele-Shaw equations, leading to a simple correction factor that depends on the area fraction occupied by the contact regions. Finally, the predicted hydraulic apertures are compared to measured values for eight data sets from the literature for which aperture and conductivity data were available on the same fracture. It is found that reasonably accurate predictions of hydraulic conductivity can be made based solely on the first two moments of the aperture distribution function, and the proportion of contact area.     

Comparison of diatomics-in-molecules and simple valence-bond potential surfaces for FH2

The method of diatomics-in-molecules (DIM) is applied to the FH₂ system. With spin—orbit interaction neglected, all elements of the 24 × 24 hamiltonian matrix are tabulated as analytic functions of the six diatomic fragment potential curves. It is found that neglect of off-diagonal 8 × 8 blocks in the DIM hamiltonian matrix leads to an energy expression for the ground 1 ²A′ level which is identical to the valence-bond formula used by Blais and Truhlar in dynamical studies of the F + D₂ reaction. The ²A″ excited level from DIM theory is identical to the result derived by Blais and Truhlar, without neglect of the 8 × 8 off-diagonal blocks. The DIM and simple valence-bond energies are compared numerically for noncollinear geometries.