Hydrophilic segmented block copolymers based on poly(ethylene oxide) and monodisperse amide segments

Segmented block copolymers based on poly(ethylene oxide) (PEO) flexible segments and monodisperse crystallizable bisester tetra‐amide segments were made via a polycondensation reaction. The molecular weight of the PEO segments varied from 600 to 4600 g/mol and a bisester tetra‐amide segment (T6T6T) based on dimethyl terephthalate (T) and hexamethylenediamine (6) was used. The resulting copolymers were melt‐processable and transparent. The crystallinity of the copolymers was investigated by differential scanning calorimetry (DSC) and Fourier Transform infrared (FTIR). The thermal properties were studied by DSC, temperature modulated synchrotron small angle X‐ray scattering (SAXS), and dynamic mechanical analysis (DMA). The elastic properties were evaluated by compression set (CS) test. The crystallinity of the T6T6T segments in the copolymers was high (>84%) and the crystallization fast due to the use of monodisperse tetra‐amide segments. DMA experiments showed that the materials had a low T_g, a broad and almost temperature independent rubbery plateau and a sharp flow temperature. With increasing PEO length both the PEO melting temperature and the PEO crystallinity increased. When the PEO segment length was longer than 2000 g/mol the PEO melting temperature was above room temperature and this resulted in a higher modulus and in higher compression set values at room temperature. The properties of PEO‐T6T6T copolymers were compared with similar poly(propylene oxide) and poly(tetramethylene oxide) copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4522–4535, 2007     

Separation strategy for acidic chiral pharmaceuticals with capillary electrochromatography on polysaccharide stationary phases

The effect of five factors on the capillary electrochromatographic enantioseparation of acidic compounds was studied using an experimental design. The studied factors were pH, acetonitrile content in the mobile phase, temperature, buffer concentration, and applied voltage. These experiments allowed defining a generic separation strategy applicable on acidic compounds with chemical and structural diversity. The starting screening conditions consist of a 45 mM ammonium formate electrolyte at pH 2.9 mixed with 65% acetonitrile, an applied voltage of 15 kV, and a temperature of 25 degrees C. The screening phase occasionally can be followed by an optimization procedure. Evaluation of the proposed strategy pointed out that it allows achieving baseline resolution within a relatively short time when a beginning of separation is obtained at the starting conditions. This strategy revealed enantioselectivity for 11 compounds out of 15, of which 10 could be baseline-separated after the proposed optimization steps.     

Local energy as an indicator of the accuracy of wave functions and probability densities for helium

The local energy is examined as an indicator of the accuracy of approximate wave functions for the ground state of helium. It is observed that at a given point (1) an inaccurate local energy may or may not correspond to an inaccurate value of the wave function or probability density, but (2) a value of the local energy within 0.1 a.u. of the ground-state energy corresponds to a value of the approximate wave function or probability density within about 10% of that for the ground-state wave function.     

Enantioseparations by capillary electro-chromatography: differences exhibited by normal- and reversed-phase versions of polysaccharide stationary phases

The influence of using normal-phase and reversed-phase versions of four commercial polysaccharide stationary phases on chiral separations was investigated with capillary electrochromatography (CEC). Both versions of the stationary phases, Chiralcel OD, OJ, and Chiralpak AD, AS were tested for the separation of two basic, two acidic, a bifunctional, and a neutral compound. Different background electrolytes were used, two at low pH for the acid, bifunctional and neutral substances, and three at high pH for the basic, bifunctional and neutral ones. This setup allowed evaluating differences between both stationary-phase versions and between mobile-phase compositions on a chiral separation. Duplicate CEC columns of each stationary phase were in-house prepared and tested, giving information about the intercolumn reproducibility. In general, reversed-phase versions of the current commercial polysaccharide stationary phases are found to be best for reversed-phase CEC, even though at high pH no significant differences were seen between both versions. Most differences were observed at low pH. For acidic compounds, it was seen that an ammonium formate electrolyte performed best, which is also an excellent electrolyte if coupling with mass spectrometry is desired. For basic, bifunctional and neutral compounds, no significant differences between the three tested electrolytes were observed at high pH. Here, a phosphate buffer is preferred as electrolyte because of its buffering capacities. However, if coupling to mass spectrometry is wanted, the more volatile ammonium bicarbonate electrolyte can be used as an alternative.     

Activation of Sperm EGFR by Light Irradiation is Mediated by Reactive Oxygen Species

To acquire fertilization competence, spermatozoa must undergo several biochemical and motility changes in the female reproductive tract, collectively called capacitation. Actin polymerization and the development of hyperactivated motility (HAM) are part of the capacitation process. In a recent study, we showed that irradiation of human sperm with visible light stimulates HAM through a mechanism involving reactive‐oxygen‐species (ROS), Ca²⁺ influx, protein kinases A (PKA), and sarcoma protein kinase (Src). Here, we showed that this effect of light on HAM is mediated by ROS‐dependent activation of the epidermal growth factor receptor (EGFR). Interestingly, ROS‐mediated HAM even when the EGFR was activated by EGF, the physiological ligand of EGFR. Light irradiation stimulated ROS‐dependent actin polymerization, and this effect was abrogated by PBP10, a peptide which activates the actin‐severing protein, gelsolin, and causes actin‐depolymerization in human sperm. Light‐stimulated tyrosine phosphorylation of Src‐dependent gelsolin, resulting in enhanced HAM. Thus, light irradiation stimulates HAM through a mechanism involving Src‐mediated actin polymerization. Light‐stimulated HAM and in vitro‐fertilization (IVF) rate in mouse sperm, and these effects were mediated by ROS and EGFR. In conclusion, we show here that irradiation of sperm with visible light, enhances their fertilization capacity via a mechanism requiring ROS, EGFR and HAM.     

Updating a chiral separation strategy for non-acidic drugs with capillary electrochromatography applicable for both chlorinated and non-chlorinated polysaccharide selectors

A generic strategy for the chiral separation of non-acidic pharmaceuticals was updated to complete an approach defined earlier. The selected chiral stationary phases are all polysaccharide selectors, chlorinated, and non-chlorinated, namely Lux(?) Amylose 2, Chiralcel(?) OD-RH, Lux(?) Cellulose 4, and Chiralpak(?) AD-RH. In this study, the screening step of a strategy defined earlier was updated and the optimization steps were re-evaluated for the applied chiral stationary phases. These screening and optimization conditions were studied by analyzing 20 pharmaceuticals at different organic modifier contents, temperatures, or applied voltages. The proposed chiral separation strategy was then evaluated with a test set of 19 non-acidic drugs. Seventeen compounds (89.5%) of the latter set could be resolved of which eight (42%) were baseline separated. The strategy thus proved to be applicable on compounds different from those used for its development.     

Enantioselectivity of monolithic silica stationary phases immobilized with different concentrations cellulose tris (3,5-dimethylphenylcarbamate), analyzed with different mobile phases in capillary electrochromatography

The 3,5-dimethylphenylcarbamate derivatives of cellulose bearing 3-(triethoxysilyl)propyl residues were immobilized in a capillary format onto a monolithic silica support by intermolecular polycondensation of the triethoxysilyl groups. The resulting columns were used for chiral separations using capillary electrochromatography. The effects of the synthesizing solvent, the selector coating procedure, the chiral selector concentration onto the silica monolith and the mobile phase pH value, on the separation of enantiomers were studied. The column-to-column reproducibility and stability also were evaluated. A test set of 14 chiral substances, including acidic, neutral, bifunctional and basic compounds, was used to investigate the effects of the factors mentioned above. Twelve pairs of enantiomers showed enantioselectivity at some of the different conditions tested. The column-to-column repeatability was satisfactory, and the prepared columns were stable under the adopted analysis conditions.     

Polarographisehe Bestimmung von Zink in Gold

Ohne Zusammenfassung     

Raman and luminescence studies of alkali borate tungstate glasses

Raman and luminescence spectroscopy were used to determine the structure of alkali borate tungstate glasses: M₂O(B₂O₃)₂·xWO₃, M = Li or Na (0 < x < 1). Raman scattering results showed the dominant tungstate species in these photochromic glasses to be tetrahedral WO₄⁼. At high concentrations of WO₃, WO₃·H₂O, and W₂O₇⁼ are also present. Luminescence measurements provided evidence for an octahedral WO₃ structure not identified by the Raman results. The results also revealed a possible change in the structure of the glasses similar to that observed in alkali borate glasses and associated with the “borate anomaly”. In addition, preliminary measurements are reported on the variation of the band gap, density, index of refraction, and the elastic coefficient C₁₁ determined by Brillouin scattering with composition.