Study of a vibrating plate: comparison between experimental (ESPI) and analytical results

Real-time electronic speckle pattern interferometry (ESPI) was used for tuning and visualization of natural frequencies of a trapezoidal plate. The plate was excited to resonant vibration by a sinusoidal acoustical source, which provided a continuous range of audio frequencies. Fringe patterns produced during the time-average recording of the vibrating plate—corresponding to several resonant frequencies—were registered. From these interferograms, calculations of vibrational amplitudes by means of zero-order Bessel functions were performed in some particular cases. The system was also studied analytically. The analytical approach developed is based on the Rayleigh–Ritz method and on the use of non-orthogonal right triangular co-ordinates. The deflection of the plate is approximated by a set of beam characteristic orthogonal polynomials generated by using the Gram–Schmidt procedure. A high degree of correlation between computational analysis and experimental results was observed.     

Harmonic and intermodulation distortion modeling in IM-DD multi-band radio over fiber links exploiting injection locked lasers

A comprehensive numerical tool has been developed for the evaluation of the performances of Radio over Fiber (RoF) links intended for wireless signal distribution.At the transmitter end an appropriate set of rate equations allows to model the optical source as a solitary laser or as an appropriately injection locked laser. The optical channel is modeled putting into account the combined effect of fiber dispersion, laser source non ideal performances (e.g. non-linear effects, frequency chirp), and quadratic detection of the receiving photodiode. The simulation model developed can be a useful tool at the design stage allowing a preliminary evaluation of the characteristics of real RoF links.     

Solvent-dependent host–guest complexation of two homologous merocyanines by a water-soluble calix[8]arene: Spectroscopic analysis and structural calculations

The sulfonated calixarene I₈C₁₂ acts as a host for homologous merocyanines Mc1 and Mc2 in organic solvents, exhibiting neither selectivity towards the guest dyes nor solvent dependence of the complexation equilibria. In water, on the contrary, only the lower homologue, Mc1, is solubilized in the presence of the calixarene. A combination of UV–visible and fluorescence spectroscopic and photophysical analysis and MD structural simulation of the calixarene-dye complexes was employed to account for the observations, and suggests that a radical change in the complexation mode occurs upon moving from an organic to an aqueous environment.     

Immunological and biochemical evidence that blepharismin is not a prosthetic group

A polyclonal, multispecific antiserum was raised against a whole 3[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate-extract of nonirradiated Blepharisma japonicum cells. It was used to reveal the composition of solutions that were hypothesized to contain the photoreceptor of the ciliate. A Bio-Gel A 1.5 m fine column chromatography of the extract allowed recovery of a single elution peak isolated by recording the 580 nm light absorbance. Fused-rocket immunoelectrophoresis of this material revealed a large number of > 300 kDa coeluted proteins. Blepharismin-rich material with a molecular mass of approximately 50 kDa, consisting of at least nine proteins was obtained when the same extract underwent preparative isoelectric focusing before column chromatography separation. Purification of the pigment obtained from light-exposed cells gave blepharismin-rich material with a molecular weight of approximately 200 kDa. Comparison of the materials obtained under the same conditions, either from the dark-kept or light-irradiated cells, by means of pore-gradient electrophoresis confirmed that proteins present in the two preparations were different. It revealed only a very small amount, if any, of proteins in the chromatography fractions with the highest absorbance at 600 nm. Results are discussed on the basis of the hypothesis that a specific blepharismin-binding protein does not exist in the protozoan.     

Cobalt blood levels after total hip replacement (THR): a new follow-up study in Trieste (Italy)

Cobalt and chromium release in patients undergone a metal-on-metal total hip replacement (THR) is a matter recently discussed and whose we do not have enough information about it yet. In literature there is little data and not completely indicative, in the biological fluids and organs the amounts of released metals are different. This is also due to the fact that cobalt and chromium blood levels can change depending on physical and working activity, individual feeding and metabolism. The results obtained confirm the presence of an increase of cobalt inthe blood of patients after total hip replacement, while the chromium levels are almost alike: average values in patients operated are 4.1 +/- 1.5 microg/L for cobalt (0.3 +/- 0.1 microg/L in the control group) and 4.5 +/- 2.9 microg/L for chromium (4.7 +/- 2.4 microg/L in the control group). In spite of the cobalt values stand below the concentration generally considered dangerous, the difference between the two examined groups points out that a risk exists for the health of these patients. These results must be confirmed by further studies, providing better information and more reliable and biocompatible materials.     

On the cycle index of point groups

In this brief work we express the cycle index of the molecular point groups as a function of a limited number of initial geometrical parameters. Such parameters are the number of elements composing the domain D of sites of substitutions in the molecule belonging to the point group G, and the numbers of sites of D lying on the symmetry elements for G.     

An artificial ionophore based on a polyhydroxylated steroid dimer

The Na+ transporting properties of the first member of a new class of artificial ionophores, based on a C2-symmetric polyhydroxylated steroid dimer, are described.     

Improved high-performance liquid chromatographic method for the determination of coenzyme Q10 in plasma.

Coenzyme (Co) Q10 was dissociated from lipoproteins in plasma by treatment with methanol and extraction with n-hexane. Subsequent clean-up on silica gel and C18 solid-phase extraction cartridges with complete recovery (99 +/- 1.2%) produced a clean extract. High-performance liquid chromatographic (HPLC) separation was performed on a C18 reversed-phase column. Three simple, rapid procedures are presented: HPLC with final UV (275 nm) detection, a microanalysis utilizing a three-electrode electrochemical detector and a microanalysis with column-switching HPLC and electrochemical detection. The methods correlate very well with classical ethanol-n-hexane extraction with UV detection. The identity and purity of the Co Q10 peak were investigated and the resulting methods were concluded to be suitable for total plasma Co Q10 determination. The average level in healthy subjects was 0.80 +/- 0.20 mg/l; the minimum detectable Co Q10 plasma level was 0.05 and 0.005 mg/l for UV and electrochemical detection, respectively. The methods were applied to many samples and the plasma Co Q10 reference values for healthy subjects, athletes, hyperthyroid, hypothyroid and hypercholesterolaemic patients are given.     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.