Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Development of new dyes for use in integrated optical sensors

New chromoionophores have been developed, focused on NIR applications so that optode membranes may be used in monolithically integrated optical sensors. The wavelength of maximum absorbance has been estimated for a new model compound by the Pariser-Parr-Pople (PPP) method. Several cyanine type dyes have been tested as membrane chromoionophores. Membrane composition has been altered to overcome solubility problems. In this way, simple pH-sensitive optode membranes have been produced.     

Free-radical reactions of diazonium salts with α,β-unsaturated carbonyl compounds. A new synthesis of 1,4-diarylpyrazole derivatives

Free-radical decomposition of diazonium salts catalyzed by titanous or titanous and ferrous salts in the presence of β-substituted α,β-unsaturated carbonyl compounds leads to 1,4-diarylpyrazole derivatives. The reaction occurs via an intermediate azo compound ( 1 ), which can be reduced by the metal salt or can be isolated and hydrogenated to pyrazole derivatives.     

Single molecular multianalyte sensor: jewel pendant ligand

[structure: see text] The jewel pendant ligand has multiple chromogenic units combined in a single molecule with the dyes linked to a semiselective binding site by three heteroatoms (O, N, S) having different HSAB characteristics, to indicate diverse response to individual transition metal ions. Using a single-molecular multianalyte sensor, multiple analytes could be determined with a minimal sensing system.     

Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

Homolytic reductive alkylation of methylvinyl ketone with ethers by Ti(III) decomposition of t-butyl hydroperoxide

Reductive alkylatin of methylvinylketone has been accomplished by hydrogen abstraction from cyclic ethers with the redox couple: t-butyl hydroperoxide-titanous chloride. A redox radical mechanism is proposed and the selectivity of the hydrogen abstraction by t-butoxy radicals and reduction of α-ketoalkyl radical by titanous ions is discussed.     

Quantitation of protein binding to the capillary wall in acidic, isoelectric buffers and means for minimizing the phenomenon

Notwithstanding the use of acidic, amphoteric, isoelectric buffers with isoelectric points (pI) in the pH 2-3 range, adsorption of proteins to the naked silica wall can be non-negligible. Two such buffers have been tested: iminodiacetic acid (IDA; pI 2.23, apparent pH 3.2 in 7 M urea) and aspartic acid (pI 2.77, apparent pH 3.7 in 7 M urea). Three potential quenchers of such interactions have been tested: hydroxyethylcellulose (HEC; number average molecular mass, Mr 27,000), TEPA (tetraethylenepentamine) and a novel, quatemarized piperazine [N(methyl-N-omega-iodobutyl)-N'-methylpiperazine] (Q-Pip), either alone or in binary and ternary mixtures. Human alpha- and beta-globin chains have been used as test proteins in capillary electrophoresis separations. It has been found that mixtures of these compounds are the worst possible remedy. E.g., a ternary mixture comprising 0.5% HEC, 0.5 mM TEPA and 1 mM Q-Pip still leaves behind 4.5% adsorbed protein onto the silica surface in runs in IDA buffer and 7 M urea (pH 3.2). Conversely, 0.5 mM TEPA or 1 mM Q-Pip, when used alone, minimize adsorption down to only 1.8% and 0.5%, respectively. When the same globin chain separations are performed in Asp and 7 M urea (pH 3.7), the situation is much worse: 44% protein is adsorbed in a ternary mixture of 0.5% HEC, 1 mM Q-Pip and 0.5 mM TEPA. However, when used alone, 0.5 mM TEPA and 1 mM Q-Pip reduce globin adsorption to levels of 8% and 5%, respectively. TEPA and Q-Pip are found to be in all cases the best quenchers of protein interaction to naked fused-silica; in addition they exhibit the unique property of smoothing the base-line and giving reproducible runs. The best method for desorbing bound protein was found to be an electrophoretic step consisting in driving sodium dodecylsulphate micelles from the cathodic reservoir.     

Investigating the reaction of a novel silica capillary coating compound with proteins/peptides by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

Quaternized piperazine ((N-methyl-N-omega-iodobutyl-N'-methyl)piperazine; QPzl) is a novel compound described as an ideal coating material for the silica capillaries that are commonly used for capillary zone electrophoresis. In the course of such analysis, contact between such coatings and biomolecules may result in certain modifications of the latter. To gain specific information on such potential modifications, solutions at pH 10.0 containing both QPzl and standard proteins/peptides were incubated for various periods and examined by matrix-assisted laser desorption/ionisation mass spectrometry. The reduction of the S-S bridges, denaturation in 8 M urea, the isoelectric point of the protein and the duration of the incubation had a profound influence on the investigated reaction. Analysis in reflectron mode and post source decay identified Cys as the likely site of interaction. The implications of the present measurements for proteome analysis using capillary and gel electrophoresis are discussed.     

α-Hydroxyalkylation of heteroaromatic bases by alcohols and hydroxylamine-O-sulphonic acid

The homolytic decomposition of hydroxylamine-O-sulphonic acid in alcoholic solvents was investigated in the presence or absence of protonated heteroaromatic bases and Fe(II) salt. The addition of the α-hydroxyalkyl radicals to the base and their oxidation by Fe(III) salt to the corresponding alkyl cyanide were competitive processes. A redox chain process involving the amino radical cation, NH₃^t., is suggested and the factors affecting the yields of the homolytic substitution are discussed.     

Analysis of trace degradation products (decarboxylated diastereoisomers) of S-adenosylmethionine by electrophoresis in capillaries with cationic coatings (N-methylpolyvinylpyridinium or divalent barium)

Commercial preparations of S‐adenosylmethionine (SAM) when analyzed in uncoated capillaries show a minute impurity believed to be decarboxylated (dc) SAM. By using two types of cationic coatings, thus reducing the electro‐endo‐osmotic flow (EOF), it was possible to separate this impurity into two diastereoisomers of dcSAM. The coatings evaluated for this purpose were: (i) N‐methylpolyvinylpyridinium, used under reversed EOF at acidic conditions (pH 4.0) and (ii) deposition of divalent barium at alkaline pH values (pH 9.4), providing reduced EOF. Under these conditions, it was possible to separate this impurity into two diastereoisomers, which by chemical synthesis were indeed proven to be dcSAM. It was further demonstrated that, in the alkylation of 5′‐methylthioadenosine by 3‐bromopropylamine in bromidric acid to dcSAM, another minute impurity was present, proven, via mass spectrometry, to consist of S‐(5′‐adenosyl)‐3‐thiopropylamine (decarboxylated and demethylated (dc‐SAH)). The LOD for the two dcSAM diastereoisomers was assessed as 17.5 μg/mL and their LOQ as 25.5 μg/mL. By the barium‐based protocol it was possible to quantify the dcSAM, present in a commercial sample of SAM, as a 0.1% impurity.