Elektrische Charakterisierung von Hochfrequenz-Niederdruck-Gasentladungen

In recent years there has emerged significant interest in low pressure radio frequency (rf) glow discharges which are used widely particulary in IC fabrication. Various parameters of the rf glow discharge have been found to be useful for its electrical characterization; however, there is no uniformity and agreement. Extensive experimental investigations on various discharge systems have shown, that the self-bias on the rf driven electrode, the complex conductivity and the breakdown characteristic are preferable parameters of rf discharges. Advantageously the self-bias and the complex conductivity should be presented in dependence on the pressure and the applied rf voltage. The discharge current cannot be measured quite accurately due to currents via leaky capacitors and the deviations from a sinusoidal form of the current due to nonlinearities.     

Investigation of the stability of metal species with respect to liquid chromatographic separations

Summary For accurate speciation analyses it is important to know the stability of the respective species, especially in the case of metal complexes. Factors affecting the chromatographic stability of such metal species are investigated. By using thermodynamic models for complex formation and chromatographic retention equilibria the influence of species concentration, stoichiometry and excess of ligand is calculated and compared with experimental results for iron complexes (lactate, gluconate and citrate species). Iron citrate is the only species, that is chromatographed as 1:2 complex (metal: ligand), while iron lactate and gluconate are transformed to 1:1 species. Problems resulting from the coelution of different species are discussed.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

A Note about the Appearance of Non-Hyperbolic Solutions in a Mechanical Pendulum System

The investigation of the behavior of a nonlinear system consists in theanalysis of different stages of its motion, where the complexity varieswith the proximity of a resonance region. Near this region the stabilitydomain of the system undergoes sudden changes due basically tocompetition and interaction between periodic and saddle solutions insidethe phase portrait, leading to the occurrence of the most differentphenomena. Depending of the domain of the chosen control parameter,these events can reveal interesting geometric features of the system sothat the phase portrait is not capable to express all them, since theprojection of these solutions on the two-dimensional surface can hidesome aspects of these events. In this work we will investigate thenumerical solutions of a particular pendulum system close to a secondaryresonance region, where we vary the control parameter in a restrictdomain in order to draw a preliminary identification about what happenswith this system. This domain includes the appearance of non-hyperbolicsolutions where the basin of attraction in the center of the phaseportrait diminishes considerably, almost disappearing, and afterwardsits size increases with the direction of motion inverted. Thisphenomenon delimits a boundary between low and high frequency of theexternal excitation.     

The crystal and molecular structure of 12,13-dibromopseurotin.

The crystal structure of 12,13-dibromopseurotin has been determined by single crystal X-ray analysis. The crystals belong to space group P2₁ with a = 16.75, b = 9.63, c = 7.42 Å, β 95.9°, Z = 2. The structure was solved by the heavy atom technique and refined to R = 0.062 with 819 significant reflexions for 299 parameters.     

Dependence of the catalytic activity of organoaluminum compounds and some of their complexes on their composition

The influence of the acidity of organoaluminum compounds and their complexes on the catalytic activity in polymerization of trioxane has been studied. It is found that the catalytic activity of organoaluminum compounds of the type R_nALX_3?n depends on n as well as the nature of R or X. Catalytic activity of the complexes also depends on the type of cocatalyst used. The change of electroconductivity in the course of formation of some initiator complexes has been studied and an attempt has been made to determine the relation between conductivity and polymerization activity.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.