Synthesis and characterization of some novel cyanonitrosyl complexes of chromium(I) with Mannich bases,aromatic aldehyde oximes and syn-phenyl-2-pyridylketoxime

Some new low-spin hexacoordinated cyanonitrosyl complexes of Cr¹ of the type [Cr(NO)(CN)₂(L)₂(H₂)], where L is an aromatic aldehyde oxime or Mannich base, have been prepared by the interaction or K₃[Cr(NO)(CN)₅]· H₂O with L in aqueous AcOH, and characterized by a range of physico-chemical techniques, I.r. data suggest that all the oxime derivatives and Mannich bases act as monodentate ligands by coordinating through the aromatic nitrogen. TMC 2564     

Determination of aromatic sulfonic acids in industrial waste water by ion-pair chromatography

A method for the identification and quantification of aromatic sulfonic acids in industrial waste water has been developed. The preparation of the samples comprises a clean-up step and an enrichment step, utilizing i) reversed-phase extraction and ii) ion-pair solid phase extraction. The aromatic sulfonic acids are separated by ion-pair chromatography with diode-array detection. An advantage of the developed ion-pair chromatographic method is the separation of linear alkylbenzenesulfonic acids (LAS), lignosulfonic acids and aromatic sulfonic acids in one chromatographic run. Also described is an optimized clean-up procedure for collected fractions of a preparative chromatographic run to identify monosulfonic acids with GC/MS after methylation. The detection limits for aromatic sulfonic acids in industrial waste waters are at the g/l level.     

Remarkable O(2)-effect in 1,4-additions of diethylzinc to 6-acyloxy-2H-pyran-3(6H)-ones and 6-alkoxy-2H-pyran-3(6H)-ones

Under the influence of air, a facile 1,4-addition of diethylzinc to acyloxypyranones and alkoxypyranones 1 takes place. Reaction of diethylzinc with molecular oxygen provides EtOOZnEt, which catalyzes the addition of diethylzinc.     

Extension of conjugation leading to bathochromic or hypsochromic effects in OPV series

Four OPV series 1-4 (a-d) with a terminal dialkylamino group as electron donor were prepared by Wittig-Horner reactions. To study the influence of the push-pull effect on the long-wavelength absorption, three of the four series contained terminal acceptor groups (CN, CHO, NO(2)). The length of the chromophores strongly affects the intramolecular charge transfer (ICT)-an effect which superimposes upon the extension of the conjugation. Increasing numbers n of repeat units cause an overall bathochromic shift for the purely donor-substituted series 1 a-4 a and the series 1 b-4 b with CN as weak acceptor. The two effects annihilate each other in the series 1 c-4 c with terminal CHO groups, so that the absorption maxima are almost independent of the length of the chromophore. A hypsochromic shift is observed for the series 1 d-4 d, which contains the strong acceptor group NO(2). This anomaly disappears on protonation of the dialkylamino group because the push-pull effect disappears in the ammonium salts. The results can be explained by semiempirical quantum mechanics (AM1, INDO/S). The HOMO-LUMO transition, which is mainly responsible for the ICT, becomes less important in the electron transitions S(0)-->S(1) when the distance between donor and acceptor is increased. The commonly used VB model, which contains an electroneutral and a zwitterionic resonance structure, is contrasted with a MO model with dipole segments at both ends of the OPV chains. The latter model turned out to be more appropriate-at least for donor-acceptor-substituted OPVs with n >/= 2.     

Syntheses of Some 3—[1′（1′H）—Substituent—pyrazol—5′—yl] benzo [5,6] coumarins

3-[1′(1′H)-Substituent-pyrazol-5′-yl]benzo[5,6]coumarins and 3-(1′,2′-oxazol-5′-yl)benzo[5,6]coumarin were prepared via condensation of 3-(2′-formyl-1′-chlorovinyl)benzo[5,6] coumarin with hydrazine derivatives or hydroxylamine.Reaction of 3-[1′(1′H)-pyrazol-5′-yl]benzo[5,6]coumarin with alkyl halides,olefinic compunds or acid chlorides are described.     

Directly visualizing carrier transport and recombination at individual defects within 2D semiconductors

Two-dimensional semiconductors (2DSCs) are promising materials for a wide range of optoelectronic applications. While the fabrication of 2DSCs with thicknesses down to the monolayer limit has been demonstrated through a variety of routes, a robust understanding of carrier transport within these materials is needed to guide the rational design of improved practical devices. In particular, the influence of different types of structural defects on transport is critical, but difficult to interrogate experimentally. Here, a new approach to visualizing carrier transport within 2DSCs, Carrier Generation-Tip Collection Scanning Electrochemical Cell Microscopy (CG-TC SECCM), is described which is capable of providing information at the single-defect level. In this approach, carriers are locally generated within a material using a focused light source and detected as they drive photoelectrochemical reactions at a spatially-offset electrolyte interface created through contact with a pipet-based probe, allowing carrier transport across well-defined, µm-scale paths within a material to be directly interrogated. The efficacy of this approach is demonstrated through studies of minority carrier transport within mechanically-exfoliated n-type WSe₂ nanosheets. CG-TC SECCM imaging experiments carried out within pristine basal planes revealed highly anisotropic hole transport, with in-plane and out-of-plane hole diffusion lengths of 2.8 µm and 5.8 nm, respectively. Experiments were also carried out to probe recombination across individual step edge defects within n-WSe₂ which suggest a significant surface charge (∼5 mC m⁻²) exists at these defects, significantly influencing carrier transport. Together, these studies demonstrate a powerful new approach to visualizing carrier transport and recombination within 2DSCs, down to the single-defect level.

Probe-based electrochemical techniques can be used to map carrier transport and recombination within two-dimensional semiconductors.     

Effects of concentration on the partitioning of macromolecule mixtures in agarose gels

To test the effects of solute concentration on the equilibrium partitioning of single macromolecules and macromolecule mixtures between bulk solutions and gels, the partition coefficient in agarose was measured for BSA and for four narrow fractions of Ficoll with Stokes radii of 30-59 A. Solutions of each test macromolecule were equilibrated with a known volume of gel, final liquid concentrations measured, and partition coefficients (gel concentration divided by bulk concentration) calculated by applying a material balance. The partition coefficient of each macromolecule was measured in 4 and 6% gels under dilute conditions and with BSA present at initial concentrations up to 13.5 g/dl. As expected, the partition coefficients decreased with increasing agarose concentration and with increasing macromolecular size. Moreover, increasing the BSA concentration increased the partition coefficient of BSA itself and that of all four Ficolls. This effect was most pronounced for the largest test solutes. Measurements at two ionic strengths confirmed that electrostatic interactions were negligible under the conditions used. The experimental results were compared with predictions from a previously developed excluded volume theory for the partitioning of mixtures of rigid, spheroidal macromolecules in fibrous media. Agarose was represented as a randomly oriented array of cylindrical fibers, BSA as a prolate spheroid, and Ficoll as a sphere. The quantitative agreement between the model predictions and the data was generally quite good, indicating that steric interactions among solute molecules and between solute molecules and gel fibers could explain the partitioning results. The theory is simple enough computationally to be applied to a variety of processes that are influenced by the equilibrium partitioning of macromolecules.     

Synthesis and Crystal Structure of [C10N2H10]2[P2Mo5O21(OH)2]·2H2O

The crystal structure of [C₁₀N₂H₁₀]₂[P₂Mo₅O₂₁(OH)₂] · 2H₂O, contains the heteropolyanion, [P₂Mo₅O₂₁(OH)₂]^4—, together with diprotonated 4, 4′‐bipyridine. The heteropolyanion is built up from five MoO₆ octahedra sharing four common edges and one common corner, capped by two PO₃(OH) tetrahedra. The structure is stabilized by hydrogen bonds involving the hydrogen atoms of the 4, 4′‐bipyridine, water molecules and the oxygen atoms of the pentamolybdatobisphosphate. This is the first example that this kind of cluster could be isolated in the presence of a poly‐functional aromatic molecule ion. Crystal data: triclinic, P1¯ (No. 2), a = 9.983(2)Å, b = 11.269(2)Å, c = 17.604(4)Å, α = 73.50(3)°, β = 84.07(3)°, γ = 67.96(3)°; V = 1760.0(6)ų; Z = 2; R₁ = 0.037 and wR₂ = 0.081, for 9138 reflections [I > 2σ(I)].     

Structural Patterns and Dimensionality in Magnesium Borophosphates: The Crystal Structures of Mg2(H2O)[BP3O9(OH)4] and Mg(H2O)2[B2P2O8(OH)2]·H2O

Hydrothermal investigations in the system MgO/B₂O₃/P₂O₅(/H₂O) yielded two new magnesium borophosphates, Mg₂(H₂O)[BP₃O₉(OH)₄] and Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O. The crystal structures were solved by means of single crystal X‐ray diffraction. While the acentric crystal structure of Mg₂(H₂O)[BP₃O₉(OH)₄] (orthorhombic, P2₁2₁2₁ (No. 19), a = 709.44(5) pm, b = 859.70(4) pm, c = 1635.1(1) pm, V = 997.3(3) × 10⁶ pm³, Z = 4) contains 1D infinite chains of magnesium coordination octahedra interconnected by a borophosphate tetramer, Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O (monoclinic, P2₁/c (No. 14), a = 776.04(5) pm, b = 1464.26(9) pm, c = 824.10(4) pm, β = 90.25(1)°, V = 936.44(9) × 10⁶ pm³,Z = 4) represents the first layered borophosphate with 6³ net topology. The structures are discussed and classified in terms of structural systematics.