A high-pressure Raman and X-ray diffraction study of the perovskite SrCeO3

A high-pressure structural study of SrCeO₃ has been performed at room temperature by Raman spectroscopy and X-ray diffraction up to 32 and 45 GPa, respectively. A first-order reversible phase transition is observed at about 12 GPa in both techniques. A second weak structural change, taking place between 18 and 25 GPa, can be suspected from Raman data. The increase in the number of Raman bands and diffraction lines is an indication that the symmetry is lowered and the compound does not evolve towards the ideal cubic perovskite structure. A Rietveld analysis of X-ray data was performed for the low-pressure phase and the atomic positions and the cell lattice parameters variations are reported in this paper. The volume compressibility derived from Raman modes (5.6×10⁻¹² Pa⁻¹), involving mainly bond-stretching for each type of polyhedron, is found to be close to the one obtained from volume cell variations measured by X-ray diffraction (7.9×10⁻¹² Pa⁻¹).     

On-line strong cation exchange micro-HPLC-ESI-MS/MS for protein identification and process optimization

We have developed an on-line strong cation exchange (SCX)-ESI-MS/MS platform for the rapid identification of proteins contained in mixtures. This platform consists of a SCX precolumn followed by a nanoflow SCX column on-line with an electrospray ion trap mass spectrometer. We also used this platform to study the dynamics of peptide separation/extraction by SCX, in particular to understand the parameters affecting the performance of SCX in multidimensional chromatography. For example, we have demonstrated that the buffer typically used for tryptic digestion of protein mixtures can have a detrimental effect on the chromatographic behaviour of peptides during SCX separations, thereby affecting certain peptide quantitation approaches that rely on reproducible peptide fractionation. We have also demonstrated that band broadening results when a step (discontinuous) gradient approach is used to displace peptides from the SCX precolumn, reducing the separation power of SCX in multidimensional chromatography. In contrast, excellent chromatographic peak shapes are observed when a defined (continuous) gradient is used. Finally, using a tryptic digest of a protein extract derived from human K562 cells, we observed that larger molecular weight peptides are identified using this on-line SCX approach compared to the more conventional reverse phase (RP) LC/MS approach. Both methods used in tandem complement each other and can lead to a greater number of peptide identifications from a given sample.     

Easy synthesis of heterocyclic carbene complexes by activation of chalcogenopyrones and benzopyrones to pyrylium salts and subsequent addition of carbanion of methoxy(methyl)pentacarbonyltungsten carbene complex

Methylenechalcogenopyran and benzopyran Fischer carbene complexes are easily obtained from commercially available chalcogenopyrones or benzopyrones and carbanion of methoxy(methyl)carbene tungsten complex. The key of the heterocyclic carbene formation is the activation of the carbonyl group by alkylation with alkyl trifluoromethanesulfonate reagent.     

La matrice eau de mer et le signal du cuivre en spectrometrie d'adsorption atomique sans flamme : Partie 1: Etude de l'influence des principaux composants

(Copper signals from seawater matrices in electrothermal atomic absorption spectrometry. Part 1: study of the effects of principal inorganic ions.)The effects of the main inorganic ions of seawater (Na⁺, Mg²⁺, Ca²⁺, Cl^?, SO^2?₄), and of nitrate as modifier, on the electrothermal atomic absorption spectrometric signal of copper are studied. Sodium chloride, sulfate or nitrate, magnesium chloride or nitrate, and calcium chloride can cause serious interferences. Thermal treatment at about 700°C prevents the interference of MgCl₂ by its hydrolysis. Ashing can be done without loss of copper at higher temperatures in the presence of sulfate salts (1300°C) and nitrate salts (1200°C) than in the presence of chloride salts (1100°C). This is ascribed to the stabilising effect of oxides and sulfides. A study of the influence of two-component matrices, MCl-MNO₃ or MCl-MSO₄, on the atomization signal of copper confirms this stabilizing effect which adds to the decrease in interference connected with removal of chloride in acidic medium.     

Fast reproducible identification and large-scale databasing of individual functional cognitive networks

Background  

Although cognitive processes such as reading and calculation are associated with reproducible cerebral networks, inter-individual variability is considerable. Understanding the origins of this variability will require the elaboration of large multimodal databases compiling behavioral, anatomical, genetic and functional neuroimaging data over hundreds of subjects. With this goal in mind, we designed a simple and fast acquisition procedure based on a 5-minute functional magnetic resonance imaging (fMRI) sequence that can be run as easily and as systematically as an anatomical scan, and is therefore used in every subject undergoing fMRI in our laboratory. This protocol captures the cerebral bases of auditory and visual perception, motor actions, reading, language comprehension and mental calculation at an individual level.     

Laser–Induced Fluorescence Detection of Carbamates Traces in Water

The absorption and fluorescence spectra of carbaryl (CB), carbofuran (CF) and carbendazim (MBC) have been studied. Fluorescence lifetime and fluorescence quantum yields are also reported as well as the influence of pH, solvent and presence of humic acids on fluorescence. The limit of detection (LD) of the three compounds has been measured by direct analysis by laser-induced fluorescence (LIF) using a pulsed YAG laser with an Optical Parametric Oscillator (OPO) as excitation source and an Intensified Charged Coupled Device (ICCD) camera for the fluorescence detection. Instrumental LD found for CB, for MBC and for CF are respectively 4, 50 and 1000 ng L⁻¹. In tap water, the LD obtained is 800 ng L⁻¹ for MBC and 20,000 ng L⁻¹ for CF. For CB, the use of a time shift between excitation and emission allows to reach a LD of 20 ng L⁻¹ in tap water.     

Nature of the high-pressure transition in Fe2O3 hematite

We present a new method to separate the crystallographic and electronic phase transitions in hematite using x-ray emission spectroscopy and x-ray diffraction. Our observations, based on the behavior of a metastable high-pressure phase in the stability domain of the low-pressure phase, show that the electronic transition is preempted by the crystallographic transition. The former occurs only afterwards in the high-pressure phase, possibly as a result of a Mott transition. The idea that the electronic transition drives the transition in hematite is therefore invalidated. Such methods should help elucidate the mechanics and the driving forces behind a number of first-order high-pressure phase transitions.     

Pressure induces major changes in the nature of Americium's 5f electrons

Americium occupies a pivotal position in the actinide series with regard to the behavior of 5f electrons. High-pressure techniques together with synchrotron radiation have been used to determine the structural behavior up to 100 GPa. We have resolved earlier controversial findings regarding americium and find that our experimental results are in discord with recent theoretical predictions. We have two new findings: (1) that there exists a critical, new structural link between americium under pressure and its near neighbor, plutonium; and (2) that the 5f electron delocalization in americium occurs in two rather than one step.     

Effect of the polar headgroup of phospholipids on their interaction with actin

It is generally admitted that actin filaments are anchored to a membrane by membranar actin-binding-proteins. However, we found that actin may also interact directly with membrane phospholipids. The actin-phospholipid complex has been investigated at the air-water interface using a film balance technique. In order to probe the effect of the phospholipid headgroup on the actin-phospholipid interaction, we focus mainly on phospholipids that have the same acyl chain length but different headgroups. For all the phospholipids, the apparent area per molecule (the total surface divided by the number of lipid molecules) increases after the injection of the protein into the subphase, which suggests an intercalation of actin between the phospholipid molecules. This effect seems to be more important for DMPE and DMPS than for DMPG, suggesting that the headgroup plays an important role in this intercalation. The critical surface pressure associated to the liquid expanded-liquid condensed (LE-LC) phospholipid transition increases with the concentration of G-actin and thus suggests that G-actin acts as an impurity, simply competing as a surfactant at the air-water interface. On the other hand, F-actin affects the LE to LC transition of phospholipids differently. In this case, the LE to LC transition is broader and F-actin slightly decreases the critical surface pressure, which suggests that electrostatic interactions are involved.