排序方式: 共有127条查询结果,搜索用时 15 毫秒
1.
Marco Sangermano Mehmet Atilla Tasdelen Yusuf Yagci 《Journal of polymer science. Part A, Polymer chemistry》2007,45(21):4914-4920
Photoinitiated cationic polymerization of mono‐ and bifunctional epoxy monomers, namely cyclohexeneoxide (CHO), 4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexanecarboxylate (EEC), respectively by using sulphonium salts in the presence of hydroxylbutyl vinyl ether (HBVE) was studied. The real‐time FTIR spectroscopic, gel content determination, and thermal characterization studies revealed that both hydroxyl and vinyl ether functionalities of HBVE take part in the polymerization. During the polymerization, HBVE has the ability to react via both active chain end (ACE) and activated monomer mechanisms through its hydroxyl and vinyl ether functionalities, respectively. Thus, more efficient curing was observed with the addition of HBVE into EEC‐containing formulations. It was also demonstrated that HBVE is effective in facilitating the photoinduced crosslinking of monofunctional epoxy monomer, CHO in the absence of a conventional crosslinker. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4914–4920, 2007 相似文献
2.
In this paper, the Moufang-Klingenberg plane over a local alternative ring R of dual numbers is studied. It is shown that its collineation group is transitive on quadrangles. It is therefore shown that
the coordinatization of these Moufang-Klingenberg planes is independent of the choice of the coordinatization quadrangle.
Also, the concept of 6-figures is extended to these Moufang-Klingenberg planes and it is shown that any 6-figure corresponds
to only one inversible m ∈ R. 相似文献
3.
4.
Arzu Gumus Murat Bozdag Atilla Akdemir Andrea Angeli Silvia Selleri Fabrizio Carta Claudiu T. Supuran 《Molecules (Basel, Switzerland)》2022,27(14)
A novel series of thiosemicarbazide-substituted coumarins was synthesized and the inhibitory effects against four physiologically relevant carbonic anhydrase isoforms I, II, IX and XII showed selective activities on the tumor-associated IX and XII isozymes. Molecular modeling studies on selected compounds 14a and 22a were performed. The binding modes of such compounds were determined assuming their enzymatically active structures (i.e., cinnamic acid) in the thermodynamically favored, and not previously explored, E geometry. Molecular modelling suggests multiple interactions within the enzymatic cavity and may explain the high potency and selectivity reported for the hCAs IX and XII. 相似文献
5.
S. Ö. Akdemir S. D. Eryilmaz E. Öztekin 《International journal of quantum chemistry》2012,112(6):1585-1591
In this article, extremely simple analytical formulas are obtained for rotational overlap integrals which occur in integrals over two reduced rotation matrix elements. The analytical derivations are based on the properties of the Jacobi polynomials and beta functions. Numerical results and special values for rotational overlap integrals are obtained by using symmetry properties and recurrence relationships for reduced rotation matrix elements. The final results are of surprisingly simple structures and very useful for practical applications. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012 相似文献
6.
7.
Mixed matrix materials, containing poly(dimethylsiloxane), phosphine oxide-based polyimide, and zeolite Y were prepared by means of blending hybridisation. The thermal stability of the materials and the hydrophobic properties were enhanced. The decrease in the glass transition temperature of the materials with the increase in poly(dimethylsiloxane) content supported the polymer-chain flexibility. The pristine polyimide and the zeolite-filled polyimide exhibited the highest transparency. Fourier transform infrared (FTIR) spectroscopy confirmed that the increase in the amount of the lowest molecular mass poly(dimethylsiloxane) ingredient indicated strong alkyl and Si-O-Si stretching modes, whilst the alkyl and Si-O-Si stretching intensity decreased in the presence of the highest amount of and the highest molecular mass poly(dimethylsiloxane). The hydrophobic poly(dimethylsiloxane) moiety created an inverse relationship between the porosity of the materials (surface roughness) and the hydrophilicity. The nanocrystallite domain, identified by X-ray diffraction analysis (XRD) and possessing an exotherm crystallisation peak, occurred in the lowest amount of poly(dimethylsiloxane) with the highest molecular mass-based hybrid material. The nanocrystallite enhanced the storage modulus as determined by the dynamic mechanical analyser (DMA). The nanocrystalline formation resulted in a slight increase in the alkyl stretching and the Si-O-Si stretching of the lowest amount of and the highest molecular mass poly(dimethylsiloxane)-containing material over those of the lowest molecular mass poly(dimethylsiloxane) in the same amounts of material involved. 相似文献
8.
9.
In the present work, the synthesis, photochromism and electrochemistry of a novel material 1, 1-(4-[3,4-bis(2,5-dimethyl-3-thienyl)cyclopent-3-en-1-yl]phenyl)-2,5-di-2-thienyl-1H-pyrrole, with pendant dithienylethene (DTE) photochromic units are described. It should be noted that the system 1 can be reversibly and efficiently switched between open (1o) and closed (1c) states by light in both solution and in the solid poly(methyl methacrylate) matrix. It is also noteworthy that the two isomers (1o and 1c) of this novel system 1 can be smoothly polymerized on ITO by electrochemical means. Surprisingly, the DTE unit in 1 does not retain its photochemical switching properties after immobilization onto ITO. The morphology of the polymer film was investigated by AFM analysis. Furthermore, it was found that the polymer exhibited remarkable electrochromic features that can be switched from green in the neutral state to violet state under applied external potentials without disturbing the photochromic units. 相似文献
10.
A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N3) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using 1H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N3 loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N3 in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments. 相似文献