Determination of vanadium in biological matrices by flame atomic absorption spectrometry with activated carbon enrichment

For the determination of vanadium in biological materials by flame AAS an enrichment is described which comprises chelation with oxine and adsorption on activated carbon: The relative standard deviation for 10 g V/L was found to be 6% (n=15).Dedicated to Professor Dr. Dieter Klockow on the occasion of his 60th birthday     

Determination of Cr(VI) and Cr(III) by Using Activated Carbon-Atomic Absorption Spectrometry

A method for the separation and preconcentration of Cr(III) and Cr(VI) on activated carbon in presence of diethyldithiocarbamate as a complexing reagent was optimized. The method makes it possible to achieve 200- to 500-fold Cr(VI) concentrating depending on the initial volume of the solution to be analysed and the final volume eluted. The Cr(VI) concentration in the background solution determined with RSD 30% was equal to 1.5 g L. The limit of Cr(VI) determination was equal to 0.9 g L.     

Sensitive,Accurate and Selective Determination of Cd(II) Using Anodic Stripping Voltammetry with in-situ Hg-Bi Film Modified Pencil Graphite Electrode After Magnetic Dispersive Solid Phase Microextraction

This paper describes a novel approach to detect Cd(II) using the combination of the differential pulse anodic stripping voltammetry and magnetic nanoparticle based dispersive solid phase microextraction as an efficient, green and accurate method. Currents of Cd(II) increased linearly in the range from 75 to 2000 ng L⁻¹ Cd(II) with a detection limit of 21.6 ng L⁻¹. The RSD values of 2.6 and 6.0 % for 1.00 and 0.10 μg L⁻¹ respectively showed that proposed method has an acceptable repeatability. Recovery values between 92.3 and 98.6 % showed that this approach can be successfully used for determination of Cd(II) in water samples.     

A Novel Docetaxel-Biotin Chemical Conjugate for Prostate Cancer Treatment

A novel conjugate of docetaxel and biotin (designated as IDD-1010) was designed and chemically synthesized via an ester linkage at position 2’ carbon in docetaxel. The synthesized pure IDD-1010 exhibits a potent anti-cancer activity in in vitro and in vivo studies. At 10 nM, IDD-1010 has induced increased apoptosis and mitotic arrest of PC3-Luc prostate cancer cells, causing aneuploidy and cell death at higher concentrations. Toxicology studies indicate that the maximal tolerated dose (MTD) of IDD-1010 is 150 mg/kg in mice; equivalent to about 12.2 mg/kg of body weight, or to about an 850 mg dose for a patient weighing 70 kg. The MTD-treated mice exhibited weight gain similar to that of the control group, with no gross pathological signs at 14 days post-dosing. At a lower dose, IDD-1010 treatment did not lead to any significant weight loss in mice, although decreased the tumor volume stemming from injecting cancer cells into the dorsal loop of mouse prostate, and it was found to be more potent than Paclitaxel (reference drug). Similarly, IDD-1010 treatment significantly reduced tumor weight and thereby increased the percentage of mice survival as compared to reference drug-treated and control groups. To summarize, the described experiments using IDD-1010, as compared to the reference drug, strongly suggest a potential treatment utility with a wider therapeutic window for prostate cancer. Henceforth, clinical research on such a novel drug candidate would be greatly worthwhile.     

Seasonal Changes in Copper and Cobalt Concentrations of Pinus nigra L.,Cedrus libani and Cupressus arizonica Leaves to Monitor the Effects of Pollution in Elazig(Turkey)

The aim of this study is to examine seasonal changes in Cu and Co concentrations of three plant species for monitoring the effects of pollution in Elazig,Turkey.For this purpose,the leaves of the Pinus nigra L.,Cedrus libani and Cupressus arizonica together with soil samples were collected from different points depending on traffic intensity,nearness the city center and cement factory as well as control location during different months of the year.Flame atomic absorption spectrophotometer(FAAS) was used for measurement of the metals in clear digests after the dry ashing method.Copper and Co concentrations were in the ranges from 1.3to 2.6mg.kg-1 and相似文献   

Functional Stabilization of Cellulase from Aspergillus niger by Conjugation with Dextran-aldehyde

The covalent conjugates of cellulase from Aspergillus niger were prepared with various molar ratios by using dextran. The conjugate (n_E/n_D: 1/5) showed higher activity than purified enzyme at all temperatures after 1 h of incubation and its activity could also be measured at higher temperature. Also, this conjugate lost only 60% activity in 2 h at 70°C in comparison to the purified enzyme, which lost all its activity. In addition, conjugation protected cellulase against denaturation in the presence of sodium dodecylsulfate (residual activity of about 80%) and inactivation by air bubbles (residual activity of about 50% for 4 h).     

Formulations and Valid Inequalities for the Heterogeneous Vehicle Routing Problem

We consider the vehicle routing problem where one can choose among vehicles with different costs and capacities to serve the trips. We develop six different formulations: the first four based on Miller-Tucker-Zemlin constraints and the last two based on flows. We compare the linear programming bounds of these formulations. We derive valid inequalities and lift some of the constraints to improve the lower bounds. We generalize and strengthen subtour elimination and generalized large multistar inequalities.     

Novel hybrid process for the conversion of microcrystalline cellulose to value-added chemicals: part 2: effect of constant voltage on product selectivity

In this study, electrochemical degradation of microcrystalline cellulose (MCC) under hot-compressed water was investigated via application of constant voltage on reaction medium. Constant voltage ranges from 2.5 to 8.0 V was applied between anode (Titanium) and cathode (reactor wall). As an electrolyte and proton source 5–25 mM of H₂SO₄ was used. Reactions were carried out in a specially designed batch reactor (450 mL) made of T316 for 240 min at temperature of 200 °C.MCC decomposition products such as glucose, fructose, furfural, 5-HMF and levulinic acid were detected and quantified by High Performance Liquid Chromatography (HPLC). In the absence of electrolyte, applied voltage (2.5 and 4.0 V) decreased the total organic carbon (TOC) yield, in contrast at 8.0 V, TOC yield increased to 13%. Application of 8.0 V in hydrothermal conditions alter MCC decomposition pathway selectively to furfural (15%). Addition of electrolyte (5 mM, H₂SO₄) and application of 2.5 V potential increased TOC (54%) and changed the decomposition pathway in favor of 5-HMF (30%) and levulinic acid (21%). The structural changes in solid residues of electrochemically reacted MCC was analyzed by Fourier Transform Infrared Spectroscopy (FTIR) and found that MCC particles functionalized by carboxylic acid and sulfonated groups by the application of constant voltage to reaction medium. In the presence of electrolyte, under certain voltage (2.5 V), functionalization of solid particles became more obvious in FTIR spectrum results. Therefore, change in the selectivity values of degradation products were conducted with the functionalization of MCC particles due to applied voltage under sub-critical conditions.     

Theoretical investigation of triazine based a star shape pyrrole monomer

In this work, we report a comprehensive theoretical investigation of electroactive star shaped pyrrole functionalized triazine monomer with two main goals. First goal of this work is to explore the physical and chemical properties of the monomer, then to investigate correlation between the experimental and the theoretical properties of monomer. The scale factor which is calculated from B3LYP/cc-pVDZ was determined as 0.985 for FT-IR and it is an important and reliable contribution to the literature. It is determined that the most appropriate basis set for this molecule. The other novel objective of this research is to investigate temperature effect on displacement of chlorine atoms in 2,4,6-trichloro-1,3,5-triazine. This method applied for the first time in the literature for triazines is especially crucial to the synthesis of unsymmetrical triazines.     

Heat capacity measurements on BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript> and derivation of its thermodynamic functions

Heat capacity measurements of barium tantalate (BaTa₂O₆) were carried out by using a differential scanning calorimeter at temperatures between 323 and 1323 K. From the heat capacity values of BaTa₂O₆, other thermodynamic functions (enthalpy and entropy increments) were derived between 298.15 and 1323 K. The C _p,m (298.15) value of BaTa₂O₆ was computed as 184.857 J mol^?1 K^?1. Moreover, fitted heat capacities exhibited good agreement with Neumann–Kopp rule at the temperatures between 298.15 and 1300 K.