A Scanning Electron Microscopy study of water in soil

Cold stage Scanning Electron Microscopy (SEM) with a rapid cooling technique makes it possible to investigate the water phase within unsaturated porous media. It is thought that this technique preserves the main features of the micromorphology of the water menisci as it exists in the liquid phase in soils. Saddle-shaped elements, as well as pendular rings of water, were observed with concave and convex curvatures of the water-air interface. The hydraulic conductivity of an unsaturated soil may be inferred from SEM photographs. Observations of isolated water menisci indicate the existence of an immobile water domain. The surface geometry of the water menisci was analyzed quantitatively and surface tension and capillary pressure were determined.     

Some problems concerning the use of automated radiochemical separation systems in destructive neutron activation analysis

The present state of a long term program is reviewed. It was started to elaborate a remote controlled automated radiochemical processing system for the neutron activation analysis of biological materials. The system is based on wet ashing of the sample, followed by reactive desorption of some volatile components. The distillation residue is passed through a series of columns filled with selective ion screening materials to remove the matrix activity. The solution is thus “stripped” from the interfering radioions, and it is processed to single-elements through group separations using ion-exchange chromatographic techniques. Some special problems concerning this system are treated. (a) General aspects of the construction of a (semi)automated radiochemical processing system are discussed; (b) Comparison is made between various technical realizations of the same basic concept; (c) Some problems concerning the “reconstruction” of an already published processing system are outlined.     

Stereo- and regioselectivity in asymmetric synthesis of α-amino substituted benzocyclic compounds

The enantiomerically pure chiral benzocyclic amines 6–8 were obtained by asymmetric transamination of the corresponding prochiral ketones 9a–c. The method involves: (a) formation of chiral imines 10a–c from the prochiral ketones 9a–c and the inexpensive chiral auxiliary (R)- or (S)-phenylethylamine (PEA); (b) asymmetrically induced reduction of these imines to the diastereomeric amines 11a–c and 12a–c; (c) catalytic hydrogenation to remove the benzylic fragment of the chiral PEA auxiliary. The stereoselectivity of the imine reduction, as well as the regioselectivity of the catalytic hydrogenation, are strongly dependent on the size of the saturated ring condensed with the benzene ring. This approach was used to develop a convenient, high yielding, and stereoselective route to several practically important optically active α-amino substituted benzocyclic compounds.     

Thermal expansion properties of organic crystals: a CSD study

The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). The mean volumetric thermal expansion coefficient is 168.8 × 10⁻⁶ K⁻¹ and the mean uniaxial thermal expansion coefficient is 71.4 × 10⁻⁶ K⁻¹, based on 745 and 1129 different observations, respectively. Normal and anomalous coefficients can be identified using these values and the associated standard deviations. The anisotropy of the thermal expansion is also evaluated and found to have a very broad distribution. 4719 different structures, comprising 4093 different molecular compounds and 626 additional polymorphs have been analyzed on their thermal expansion properties. Approximately 34% of these structures may have at least one orthogonal axis with negative thermal expansion, much more than generally believed. Moreover 127 structures have been identified which could have negative volumetric thermal expansion. Experimental validation using a robust protocol with data collected at more than 2 different temperatures is required to validate these cases.

The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). Negative uniaxial thermal expansion is much more common than generally believed.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

Calorimetric study on the temperature dependence of the formation of mixed ionic/nonionic micelles

The differential excess enthalpy of mixed micelle formation was measured at different temperatures by mixing nonionic hexa(ethylene glycol) mono n-dodecyl ether with anionic sodium dodecyl sulfate or cationic dodecylpyridinium chloride. The experimental data were obtained calorimetrically by titrating a concentrated surfactant solution into a micellar solution of nonionic surfactant. The composition and the size of the mixed nonionic/ionic micelles at different surfactant concentrations were also determined. Pronounced differences in both composition and excess enthalpy were found between the anionic and the cationic mixed system. For both systems, the excess enthalpies become more exothermic with increasing temperature, but for the anionic mixed system an additional exothermic contribution was found which was much less temperature dependent. Temperature dependence of the excess enthalpy was attributed to the effect of the ionic headgroup on the hydration of the ethylene oxide (EO) groups in the mixed corona. Ionic headgroups located in the ethylene oxide layer cause the dehydration of the EO chains resulting in an additional hydrophobic contribution to the enthalpy of mixing. A high affinity of sodium dodecyl sulfate for nonionic micelles and an extra exothermic and less temperature dependent contribution to the excess enthalpy found for the SDS-C(12)E(6) system might be attributed to specific interactions (hydrogen bonds) between the sulfate headgroup and the partly dehydrated EO chain.     

Enzymatic polyesterification in organic media. Enzyme-catalyzed synthesis of linear polyesters. I. Condensation polymerization of linear hydroxyesters. II. Ring-opening polymerization of ϵ-caprolactone

With the object to synthesize polyesters by enzymatic catalysis in organic media, two directions have been investigated: (1) the condensation polymerization of linear ω-hydroxyesters and (2) the ring-opening polymerization of lactones. The commercially-available crude porcine pancreatic lipase (PPL), suspended in organic solvents, was the preferred enzyme for the reactions. In order to determine the optimal conditions for the condensation polymerization, the bifunctional methyl 6-hydroxyhexanoate was used as a model compound to study the influence of the following parameters: type of the enzymecatalyst, kind of solvent, concentration, temperature, duration, size of the reaction mixture, and stirring. Film-forming polyesters with a degree of polymerization (DP) up to about 100 were obtained from linear aliphatic hydroxyesters in n-hexane at reflux temperature (69°C). Yet concurrently with the intermolecular condensation polymerization, macrolactones were also formed by intramolecular reaction. Two aromatic hydroxyesters did not react under these conditions. For the ring-opening polymerization of lactones the reaction of ?-caprolactone with methanol as the preferred nucleophile, was studied. Polyesters with a DP of up to 35 were obtained in n-hexane at temperatures between 25 and 40°C. The degrees of polymerization of the polyesters were determined by comparative analyses of the end groups in the ¹H-NMR spectra and by determination of molecular weights either by vapor phase osmometry, gel permeation chromatography, or intrinsic viscosity. © 1993 John Wiley & Sons, Inc.     

Time-resolved fluorescence analysis of the mobile flavin cofactor in p -hydroxybenzoate hydroxylase

Conformational heterogeneity of the FAD cofactor in p-hydroxybenzoate hydroxylase (PHBH) was investigated with time-resolved polarized flavin fluorescence. For binary enzyme/substrate (analogue) complexes of wild-type PHBH and Tyr222 mutants, crystallographic studies have revealed two distinct flavin conformations; the ‘in’ conformation with the isoalloxazine ring located in the active site, and the ‘out’ conformation with the isoalloxazine ring disposed towards the protein surface. Fluorescence-lifetime analysis of these complexes revealed similar lifetime distributions for the ‘in’ and ‘out’ conformations. The reason for this is twofold. First, the active site of PHBH contains various potential fluorescence-quenching sites close to the flavin. Fluorescence analysis of uncomplexed PHBH Y222V and Y222A showed that Tyr222 is responsible for picosecond fluorescence quenching free enzyme. In addition, other potential quenching sites, including a tryptophan and two tyrosines involved in substrate binding, are located nearby. Since the shortest distance between these quenching sites and the isoalloxazine ring differs only little on average, these aromatic residues are likely to contribute to fluorescence quenching. Second, the effect of flavin conformation on the fluorescence lifetime distribution is blurred by binding of the aromatic substrates: saturation with aromatic substrates induces highly efficient fluorescence quenching. The flavin conformation is therefore only reflected in the small relative contributions of the longer lifetimes.     

Non‐symmetric bent‐core mesogens with one terminal vinyl group

Two series of non‐symmetric banana‐shaped compounds, both with one alkyl and one alkenyl terminal tail, have been synthesized and studied. Both series were compared with the corresponding series with two saturated terminal alkyl tails. All the compounds have a bent central 1,3‐phenylene bis(4‐benzoyloxy)benzoate core; their mesophases were characterized by polarizing optical microscopy, differential scanning calorimetry, X‐ray diffraction and switching current response experiments. In all four series one of the terminal tails is varied from OC₈H₁₇ to OC₁₆H₃₃. The other terminal tails are OC₁₁H₂₃, O(CH₂)₉CH?=?CH₂, OC₁₀H₂₁ and O(CH₂)₈CH?=?CH₂. The short‐tailed compounds show monotropic or enantiotropic B₁ phases and the long‐tailed compounds the B₂ phase. The introduction of one terminal vinyl group slightly lowers the transition temperatures. The introduction of a second terminal vinyl group further suppresses the liquid crystalline properties. All compounds with B₂ phases have layer spacings that suggest a tilt of ～45° of the bent molecules in the layers, and their switching behaviour is antiferroelectric.