A dried blood spot assay with HPLC–MS/MS for the determination of larotrectinib in mouse blood and its application to a pharmacokinetic study

Larotrectinib is a first-generation tropomyosin kinase inhibitor, approved for the treatment of solid tumors. In this paper, we present a validated dried blood spot (DBS) method for the quantitation of larotrectinib from mouse blood using HPLC–MS/MS, which was operated under multiple reaction monitoring mode. To the DBS disc cards, acidified methanol enriched with internal standard (IS; enasidenib) was added and extracted using tert-butyl methyl ether as an extraction solvent with sonication. Chromatographic separation of larotrectinib and the IS was achieved on an Atlantis dC₁₈ column using 10 mm ammonium formate–acetonitrile (30:70, v/v) delivered at a flow-rate of 0.80 ml/min. Under these optimized conditions, the retention times of larotrectinib and the IS were ~0.93 and 1.37 min, respectively. The total run time was 2.50 min. Larotrectinib and the IS were analyzed using positive ion scan mode and parent–daughter mass to charge ion (m/z) transitions of 429.1 → 342.1 and 474.1 → 267.1, respectively, were used for the quantitation. The calibration range was 1.06–5,080 ng/ml. No matrix effect or carryover was observed. Hematocrit did not influence DBS larotrectinib concentrations. All of the validation parameters met the acceptance criteria. The applicability of the validated method was shown in a mouse pharmacokinetic study.     

Antimicrobial activity on the copolymers of 2,4‐dichlorophenyl methacrylate with methyl methacrylate: Synthesis and characterization

Copolymers of monomers 2,4‐dichlorophenyl methacrylate (2,4‐DMA) and methyl methacrylate (MMA) were synthesized with different monomer feed ratios using toluene as a solvent and 2,2′‐azobisisobutyronitrile (AIBN) as an initiator at 70 °C. The copolymers were characterized by IR‐spectroscopy, and copolymer composition was determined with UV‐spectroscopy. The linearization method of Fineman–Ross was employed to obtain the monomer reactivity ratios. The molecular weights and polydispersity indexes were determined by gel permeation chromatography (GPC). Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. The homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5227–5234, 2004     

An EOQ model with process reliability considerations

The classical economic order quantity (EOQ) model assumes that items produced are of perfect quality and that the unit cost of production is independent of demand. However, in realistic situations, product quality is never perfect, but is directly affected by the reliability of the production process. In this paper, we consider an EOQ model with imperfect production process and the unit production cost is directly related to process reliability and inversely related to the demand rate. In addition, a numerical example is given to illustrate the developed model. Sensitivity analysis is also performed and discussed.     

7-Hydroxy-4-methyl-8-(4′-methylpiperazine-1′-yl)methyl coumarin: An efficient probe for fluorescence resonance energy transfer to a bioactive indoloquinolizine system

Solvatochromic effects on the fluorescence behavior of 7-hydroxy-4-methyl-8-(4′-methyl-piperazine-1′ yl)methylcoumarin (HMMC) was studied in different solvents. The fluorescence of HMMC was found to be highly sensitive to both the polarity and the protic character of the solvent. Exploiting the polarity-sensitive fluorescence property of HMMC, its excited-state dipole moment has been determined. Fluorescence (Förster) resonance energy transfer (FRET) process from HMMC to a potent bioactive molecule 3-acetyl-4-oxo-6,7-dihydro-12 H indolo-[2,3-a] quinolizine (AODIQ) was studied. From the determined K_SV and R₀ values, it is argued that a long-range dipole-dipole interaction is operating for the energy transfer mechanism. The energy transfer efficiency (E) and the distance between the acceptor and the donor (r₀) have been determined.     

Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D(2)-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH(4))(2)HPO(4), Pd(NO)(3))(2), Ni(NO(3))(2), thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

A relaxation study of poled nonlinear optical polymers by infrared reflection-absorption spectroscopy

The relaxation of poled nonlinear optical (NLO) chromophores in polymer films was characterized by infrared (i.r.) reflection-absorption spectroscopy. Both a guest-host system and a photocrosslinkable polymer system were investigated. Polymethylmethacrylate doped with either 2-methyl-4-nitroaniline or 4(4′-nitrophenylazo)aniline was studied. The photocrosslinkable polymer system, polyvinylcinnamate doped with 3-cinnamoyloxy-4-[4-(N,N-diethylamino)-2-cinnamoyloxy phenyl azo]nitrobenzene was also investigated. Doped NLO active molecules were aligned using the corona poling technique. i.r. spectra as a function of time were used to monitor the relaxation behavior of the oriented dyes after poling. Relaxation of NLO molecules was followed at various characteristic vibrational frequencies. The relaxation behavior of both systems were found to be consistent with those studied by the second harmonic generation technique.     

Kinetics ofEDTA substitution of N,N′-ethylenedisalicylamidato cuprate(II) in alkaline media

Summary The kinetics ofEDTA reaction with N,N-ethylenedisalicylamidato cuprate(II) is followed at 30°C in borate buffer and is found to be first order in each reactant. The reaction ispH dependent and involves protonation of a deprotonated peptide nitrogen followed by nucleophilic attack byEDTA.

---

Kinetik derEDTA-Substitution von N,N-Ethylendisalizylamidatokupfer(II) in alkalischem Medium (Kurze Mitt.)

Zusammenfassung Die Kinetik derEDTA-Reaktion mit N,N-Ethylendisalizylamidatokupfer(II) wurde bei 30°C in Borat-Puffer verfolgt. Es wurde erste Ordnung bezüglich jedes Reaktanden festgestellt. DiepH-abhängige Reaktion beinhaltet die Protonierung eines deprotonierten Peptid-Stickstoffs, gefogt von einem nucleophilen Angriff einesEDTA-Moleküls.

     

Mixed chelates of some trivalent lanthanide ions containing (trans-1,2-cyclhexylenedinitrilo)tetraacetate and norleucinate

Summary Formation constants of mixed chelates with (trans-1,2-cyclohexylenedinitrilo)tetra-acetate (DCTA) as primary ligand and norleucinate (nle) as secondary ligand with metal ions La(III), Ce(III), Pr(III), Sm(III), Gd(III), Tb(III), Dy(III), Er(III), and Yb(III) have been determined by the modified potentiometricpH titration method of Irving-Rossotti in aqueous medium at (295±1) K and fixed ionic strength of =0.1M (NaClO₄). Formation constants of binary complexes of the metal ions with the secondary ligand have also been determined under identical conditions. The mixed chelates were found to be more stable than the binary ones. The order of stabilities in terms of metal ions is La(III)Gd(III)

Gemischte Chelate einiger dreiwertiger Lanthanidenionen mit (trans-1,2-Cyclohexylendinitril)tetraacetat und Norleucinat

Zusammenfassung Es wurden die Komplexbildungskonstanten gemischter Chelate mit (trans-1,2-Cyclohexylendinitril)tetraacetat als Primärkomponente und Norleucinat als Sekundärkomponente mit den Metallionen La(III), Ce(III), Pr(III), Sm(III), Gd(III), Tb(III), Dy(III), Er(III) und Yb(III) mittels einer modifizierten potentiometrischen Titrationsmethode nach Irving-Rossotti in wäßrigem Medium bei (295±1) K und einer konstanten Ionenstärke von =0.1M (NaClO₄) bestimmt. Die Bildungskonstanten der binären Komplexe der Metallionen mit dem Sekundärliganden wurden ebenfalls unter identen Bedingungen bestimmt. Es wurde festgestellt, daß die gemischten Chelate stabiler sind als die binären. Die Stabilitätsreihenfolge bezüglich der Metallionen ist La(III)Gd(III)     

Constrained photophysics of 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine in micellar environments: a spectrofluorometric study

Photophysical properties of 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ) have been studied in different aqueous micellar environments using steady-state and time-resolved emission spectroscopy. The charge transfer (CT) fluorescence exhibits appreciable hypsochromic shift, along with an enhancement in the fluorescence intensity in all the micellar media. This is associated with an increase in the fluorescence anisotropy (r), which suggests that the fluorophore molecule experiences motionally restricted environments upon binding with the micelles. Fluorescence spectral position and fluorescence quenching studies suggest that the fluorescing moiety does not penetrate into the core of the micellar units; rather it binds at the micelle-water interfacial region. The binding constant and free energy change during probe-micelle binding have been evaluated from relevant fluorescence data. Light has been thrown on the mode of action of urea on micelle bound probes. The results are interpreted in terms of the model that urea displaces water molecules from the micellar interface and the consequent destabilization leads to the expulsion of the probe molecules from the interfacial region. Polarity and viscosity of the microenvironments around the probe have been determined in the micellar systems.