Quantitative determination of Closantel residues in milk by high-performance liquid chromatography with fluorescence detection.

A HPLC method with fluorescence detection for quantitative determination of Closantel residues in milk has been developed and validated. The proposed cleaning procedure with acetonitrile and acetone extraction, and solid-phase clean-up with Florisil enables concentrations of Closantel below 50 micrograms/l to be determined. The method was shown to be sufficient, precise, accurate, selective and rugged. The method was applied in the regular monitoring of Closantel residues in milk and of the pharmacokinetic behavior of Closantel in sheep.     

Automatized System for Measuring the Surface Density of Current Carriers and Electrical Permittivity of Conducting Materials

An automatised system for analyzing the electron topography of a conducting surface (semiconductors, metals, ferrites or conductor ceramics) is represented. The function of the system is based on the recently observed surface photo-charge effect. The investigation is express and contactless. The system allows visualisations of different formations on the surface such as defects, ion-implanted areas, etc. on a computer screen. The structure of the system is described. The results from investigations with GaP and Cu are reported.     

Sol-gel bioactive glass-ceramics Part II: Glass-ceramics in the CaO-SiO2-P2O5-MgO system

Ceramics, with basic composition based on the CaO-SiO₂-P₂O₅-MgO system with different Ca+ Mg/P+Si molar ratio (R), were prepared via polystep sol-gel technique. The structure of the obtained ceramic materials has been studied by XRD, FTIR spectroscopy, and SEM. X-ray diffraction showed the presence of akermanite and HA for the sample with R = 1.68 and Mg substituted β-TCP and silicocarnotite for the sample with R = 2.16, after thermal treatment at 1200°C/2 h. The obtained results are in good agreement with FTIR. In vitro test for bioactivity in static condition proved that the carbonate containing hydroxyapatite (CO₃HA) can be formed on the surface of the synthesized samples. CO₃HA consisted of both A- and B-type CO₃²⁻ ions. SEM micrographs depicted different forms of HA particles, precipitated on the surface after soaking in 1.5 simulated body fluid (SBF).      

Low energy electron induced damage to plasmid DNA pQE30

Low energy electrons (LEEs) are produced in copious amounts by the primary radiation used in radiation therapy. The damage caused to the DNA by these secondary electrons in the energy range 5-22 eV has been studied to understand their possible role in radiation induced damage. Electrons are irradiated on dried films of plasmid DNA (pQE30) and analysed using agarose gel electrophoresis. Single strand breaks (SSBs) induced by LEE to supercoiled plasmid DNA show resonance structures at 7, 12, and 15 eV for low doses and 6, 10, and ～18 eV at saturation doses. The present measurements have an overall agreement with the literature that LEEs resonantly induce SSBs in DNA. Resonant peaks in the SSBs induced by LEEs at 7, 12, and 15 eV with the lowest employed dose in the current study are somewhat different from those reported earlier by two groups. The observed differences are perhaps related to the irradiation dose, conditions and the nature of DNA employed, which is further elaborated.     

In vitro bioactivity of Polyurethane/85S Bioglass composite scaffolds

In the present work Polyurethane (PU)/Bioglass (BG) composite materials were synthesized with different content of BG (10 and 20 mol.%) as filler. The 85S Bioglass was synthesized via polystep sol-gel method. The chemical composition of BG is 85SiO₂-10CaO-5P₂O₅ (wt.%). The synthesis of PU was carried out by a two-step polyaddition reaction. The 85S BG was added in situ during the polymerization reaction. In vitro bioactivity of the prepared composites was examined in the presence of 1.5 SBF for 7 days in static conditions. The structure of synthesized PU/BG composites before and after in vitro test was determined by XRD, FTIR and SEM. XRD of the samples before in vitro test proved that the phase of γCa₂P₂O₇ in the PU/20BG is visible. FTIR revealed the presence of urethane bond between OH-(from BG) and NCO groups (from PU). Based on FTIR results after in vitro test in 1.5 SBF solutions, A/B-carbonate containing hydroxyapatite (CO₃HA) was formed. XRD proved that HA was formed on the surface of the samples, but Ca₂P₂O₇ does not undergo any changes in the 1.5 SBF solution. SEM depicted the nano-HA agglomerated in spherical particles after immersion in 1.5 SBF for 7 days.     

Electrochemical growth of single mercury droplets under joint ohmic, diffusion, and charge transfer limitations

Growth kinetics of single mercury droplets electrochemically deposited on a platinum single crystal electrode was investigated. Potentiostatic current transients were recorded at different electrode potentials. The experimental data were interpreted on the basis of a general theoretical model accounting for joint ohmic, diffusion and charge transfer limitations. Information is obtained on two important growth parameters: the exchange current density at the mercury/solution interface boundary and the diffusion coefficient of mercury ions. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 6, pp. 756–759. The text was submitted by the authors in English.     

Metalated 1, 3‐Azaphospholes: η1‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)5 and μ2‐[(1, 3‐Benzazaphospholide‐P)(cyclopentadienide)nickel] Complexes

1H‐1, 3‐Benzazaphospholes react with M(CO)₅(THF) (M = Cr, Mo, W) to give thermally and relatively air stable η¹‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)₅ complexes. The ¹H‐ and ¹³C‐NMR‐data are in accordance with the preservation of the phosphaaromatic π‐system of the ligand. The strong upfield ³¹P coordination shift, particularly of the Mo and W complexes, forms a contrast to the downfield‐shifts of phosphine‐M(CO)₅ complexes and classifies benzazaphospholes as weak donor but efficient acceptor ligands. Nickelocene reacts as organometallic species with metalation of the NH‐function. The resulting ambident 1, 3‐benzazaphospholide anions prefer a μ₂‐coordination of the η⁵‐CpNi‐fragment at phosphorus to coordination at nitrogen or a η³‐heteroallyl‐η⁵‐CpNi‐semisandwich structure. This is shown by characteristic NMR data and the crystal structure analysis of a η⁵‐CpNi‐benzazaphospholide. The latter is a P‐bridging dimer with a planar Ni₂P₂ ring and trans‐configuration of the two planar heterocyclic phosphido ligands arranged perpendicular to the four‐membered ring.     

Low temperature structural fluorescence spectra of tetrahydroxyanthraquinone adsorbed on silica

Adsorption of TOAQ on the surface of porous (silica gel) and non-porous (aerosil) silica modification does not cause rupture of intramolecular hydrogen bonds (IMHB). The fine structure spectra of TOAQ fluorescence on silica gel contain a set of frequencies that are characteristic of weakly perturbed molecules. A number of new spectral effects appear due to the existence of pores and centres of a nonhydroxyl character. Hydroxyl groups of aerosil take part in formation of intermolecular hydrogen bonding with the TOAQ C=O group. The bond energy of the four OH-groups of the TOAQ molecule changes non-uniformly, and the symmetry of an equilibrium nuclear configuration of TOAQ decreases.