On the 1/n expansion

The 1/n expansion is considered for then-component non-linear -model (classical Heisenberg model) on a lattice of arbitrary dimensions. We show that the expansion for correlation functions and free energy is asymptotic, for all temperatures above the spherical model critical temperature. Furthermore, the existence of a mass gap is established for these temperatures andn sufficiently large.Supported in part by the National Science Foundation under Grant PHY 79-16812     

In situ reaction mechanism studies on the atomic layer deposition of Al2O3 from (CH3)2AlCl and water

Reaction mechanisms between dimethylaluminum chloride and deuterated water in the atomic layer deposition (ALD) of Al2O3 were studied at 150-400 degrees C using a quartz crystal microbalance (QCM) and a quadrupole mass spectrometer (QMS). The observed reaction byproducts were DCl and CH3D. QMS showed that about one-third of the chlorine, and half of the methyl ligands were released during the (CH3)2AlCl pulse. The growth rate deduced from the QMS and QCM data was in qualitative agreement with the previously published growth rate from ALD film growth experiments.     

Expanding the Scope of the Cleavable N-(Methoxy)oxazolidine Linker for the Synthesis of Oligonucleotide Conjugates

Oligonucleotides modified by a 2′-deoxy-2′-(N-methoxyamino) ribonucleotide react readily with aldehydes in slightly acidic conditions to yield the corresponding N-(methoxy)oxazolidine-linked oligonucleotide-conjugates. The reaction is reversible and dynamic in slightly acidic conditions, while the products are virtually stable above pH 7, where the reaction is in a ‘‘switched off-state’’. Small molecular examinations have demonstrated that aldehyde constituents affect the cleavage rate of the N-(methoxy)oxazolidine-linkage. This can be utilized to adjust the stability of this pH-responsive cleavable linker for drug delivery applications. In the present study, Fmoc-β-Ala-H was immobilized to a serine-modified ChemMatrix resin and used for the automated assembly of two peptidealdehydes and one aldehyde-modified peptide nucleic acid (PNA). In addition, a triantennary N-acetyl-d-galactosamine-cluster with a β-Ala-H unit has been synthesized. These aldehydes were conjugated via N-(methoxy)oxazolidine-linkage to therapeutically relevant oligonucleotide phosphorothioates and one DNA-aptamer in 19–47% isolated yields. The cleavage rates of the conjugates were studied in slightly acidic conditions. In addition to the diverse set of conjugates synthesized, these experiments and a comparison to published data demonstrate that the simple conversion of Gly-H to β-Ala-H residue resulted in a faster cleavage of the N-(methoxy)oxazolidine-linker at pH 5, being comparable (T_0.5 ca 7 h) to hydrazone-based structures.     

Thermodynamic Properties of Crystalline Cellulose Allomorphs Studied with Dispersion-Corrected Density Functional Methods

The phonon properties and thermodynamics of four crystalline cellulose allomorphs, Iα, Iβ, II, and III1, have been investigated using dispersion-corrected density functional theory (DFT). In line with experimental findings, the free energy differences between the studied cellulose allomorphs are small, less than 1 kJ/mol per atom. The calculated specific heat at constant volume (Cv) has been compared with the available experimental data in the temperature range 10–300 K. Quasiharmonic approximation has been employed to study thermodynamics and specific heat at constant pressure (Cp). For the studied temperature range of 10–400 K, the specific heat of all cellulose allomorphs shows very similar behavior. The calculated and experimental specific heat agree well at low temperatures below 100 K, but the deviation between theory and experiment increases with temperature. This may be due to increasing phonon anharmonicity as the temperature increases.     

Comparative Modelling of Organic Anion Transporting Polypeptides: Structural Insights and Comparison of Binding Modes

To better understand the functionality of organic anion transporting polypeptides (OATPs) and to design new ligands, reliable structural data of each OATP is needed. In this work, we used a combination of homology model with molecular dynamics simulations to generate a comprehensive structural dataset, that encompasses a diverse set of OATPs but also their relevant conformations. Our OATP models share a conserved transmembrane helix folding harbouring a druggable binding pocket in the shape of an inner pore. Our simulations suggest that the conserved salt bridges at the extracellular region between residues on TM1 and TM7 might influence the entrance of substrates. Interactions between residues on TM1 and TM4 within OATP1 family shown their importance in transport of substrates. Additionally, in transmembrane (TM) 1/2, a known conserved element, interact with two identified motifs in the TM7 and TM11. Our simulations suggest that TM1/2-TM7 interaction influence the inner pocket accessibility, while TM1/2-TM11 salt bridges control the substrate binding stability.     

Expanding the hydride chemistry: antiperovskites A3MO4H (A = Rb,Cs; M = Mo,W) introducing the transition oxometalate hydrides

The four compounds A₃MO₄H (A = Rb, Cs; M = Mo, W) are introduced as the first members of the new material class of the transition oxometalate hydrides. The compounds are accessible via a thermal synthesis route with carefully controlled conditions. Their crystal structures were solved by neutron diffraction of the deuterated analogues. Rb₃MoO₄D, Cs₃MoO₄D and Cs₃WO₄D crystallize in the antiperovskite-like K₃SO₄F-structure type, while Rb₃WO₄D adopts a different orthorhombic structure. ²H MAS NMR, Raman spectroscopy and elemental analysis prove the abundance of hydride ions next to oxometalate ions and experimental findings are supported by quantum chemical calculations. The tetragonal phases are direct and wide band gap semiconductors arising from hydride states, whereas Rb₃WO₄H shows a unique, peculiar valence band structure dominated by hydride states.

The synthesis, structures and electronic properties of the first four heteroanionic compounds containing both hydride and transition oxometalate ions are reported.     

Coexistence of Two Different Distorted Octahedral [MnF6]3− Sites in K3[MnF6]: Manifestation in Spectroscopy and Magnetism

As a consequence of the static Jahn-Teller effect of the ⁵E ground state of Mn^III in cubic structures with octahedral parent geometries, their octahedral coordination spheres become distorted. In the case of six fluorido ligands, [MnF₆]³⁻ anions with two longer and four shorter Mn−F bonds making elongated octahedra are usually observed. Herein, we report the synthesis of the compound K₃[MnF₆] through a high-temperature approach and its crystallization by a high-pressure/high-temperature route. The main structural motifs are two quasi-isolated, octahedron-like [MnF₆]³⁻ anions of quite different nature compared to that met in ideal octahedral Mn^III Jahn-Teller systems. Owing to the internal electric field of C_i symmetry dominated by the next-neighbour K⁺ ions acting on the Mn^III sites, both sites, the pseudo-rhombic (site 1) and the pseudo-tetragonally elongated (site 2) [MnF₆]³⁻ anions are present in K₃[MnF₆]. The compound was characterized by single-crystal and powder X-ray diffraction, and magnetometry as well as by FTIR, Raman, and ligand field spectroscopy. A theoretical interpretation of the electronic structure and molecular geometry of the two Mn sites in the lattice is given by using a vibronic coupling model with parameters adjusted from multireference ab-initio cluster calculations.     

The molecular approach to heterogeneous nucleation

A molecular approach to heterogeneous nucleation has been developed. The expressions for the equilibrium cluster distribution, the reversible work of the cluster formation, and the nucleation rate have been derived. Two separate statements for the work of formation were formulated. If the equilibrium cluster distribution is normalized on the monomer concentration near the substrate surface, the reversible work of formation is expressed by DeltaG(het) (I) = (F(n) (het)-F(n) (hom))-(F(1) (het)-F(1) (hom)) + DeltaG(hom) where F(n) (het) and F(n) (hom) are the Helmholtz free energies of a cluster interacting with a substrate and a cluster not interacting with the substrate, respectively. If the equilibrium cluster distribution is normalized on the monomer concentration far from the substrate surface, the work of cluster formation is given by DeltaG(het) (II) = (F(n) (het)-F(n) (hom)) + DeltaG(hom). The former expression corresponds to the approach of the classical heterogeneous nucleation theory. The cluster partition function appears to be dependent on the location of a virtual plane, which separates the volume, where the interaction of the clusters with the substrate is effective from the one where interaction is negligible. Our Monte Carlo simulations have shown that the dependence is rather weak and thus the location of the plane is not very important. According to the simulations the variation of the plane position in the range from 20 to 50 Angstroms does not lead to a considerable change of the heterogeneous nucleation rate.     

Continuous‐Flow Microwave Synthesis of Metal–Organic Frameworks: A Highly Efficient Method for Large‐Scale Production

Metal–organic frameworks are having a tremendous impact on novel strategic applications, with prospective employment in industrially relevant processes. The development of such processes is strictly dependent on the ability to generate materials with high yield efficiency and production rate. We report a versatile and highly efficient method for synthesis of metal–organic frameworks in large quantities using continuous flow processing under microwave irradiation. Benchmark materials such as UiO‐66, MIL‐53(Al), and HKUST‐1 were obtained with remarkable mass, space–time yields, and often using stoichiometric amounts of reactants. In the case of UiO‐66 and MIL‐53(Al), we attained unprecedented space–time yields far greater than those reported previously. All of the syntheses were successfully extended to multi‐gram high quality products in a matter of minutes, proving the effectiveness of continuous flow microwave technology for the large scale production of metal–organic frameworks.