Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Pinacol-Pinacolone Rearrangement of 1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol and Bis-(4-methoxyphenyl)-acetaldehyde in Acid Media

1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol gave in acid media bis-(4-methoxy-phenyl)-acetaldehyde, 4-4′-dimethoxy-deoxybenzoin, and 1, 2-di-(p-methoxyphenyl)-ethylene oxide; their respective yields being influenced by at least 3 factors: (i) the acid, (ii) its concentration, and (iii) the reaction period. Bis-(4-methoxyphenyl)-acetaldehyde rearranged to the deoxybenzoin in boiling sulfuric (50%) or phosphoric (75%) acids (w/w), and to two isomeric 1, 2-diacetoxy-1, 2-di-(p-methoxyphenyl) ethanes when it was heated with acetic anhydride. The mechanisms of these reactions are discussed.     

兰州重离子医疗装置同步环安装控制网设计

介绍了兰州重离子医疗装置（HIMM）建造中准直安装方案里核心的测量控制网设计。同步环准直测量控制网是基于Leica AT401激光跟踪仪和综合测量软件SA建立的三维测量控制网,在控制网设计中采用9个基准柱和2个激光干涉测量得到的基准长度参考,以及Leica DNA03数字水准仪协同测量,使全局三维控制网设计精度达到0.04 mm,最终确保同步环四极磁铁安装精度达到0.10 mm的要求指标,为将来束流的稳定运行做好可靠的保证。     

On simulations investigating droplet diameter–charge distributions in electrostatically atomized dielectric liquid sprays

A general procedure has been developed for the simulation of charged liquid and electrostatically atomized sprays. The procedure follows a Lagrangian approach for simulation of spray droplets and a Eulerian approach for gas‐phase variables, including the electric field generated by the charge presence on droplets. Validation of the procedure was examined through simulations of previously published charged spray experiments. Results showed that for the specification of initial droplet charge, modelling the droplet charge–diameter relationship through a scaling law is as reliable a method as using a directly obtained charge–diameter relationship from experimental measurements. The normalized root‐mean‐square errors for sprays using the two methods were shown to be within 12% of one another, for the prediction of spatially averaged profiles of mean droplet diameters, mean axial velocities and mean radial droplet velocities. Results showed that the general spatial characteristics and dynamics of a charged liquid spray can successfully be reproduced, including the axial and radial dispersal pattern of droplets and the distribution of mean droplet diameters throughout the spray plume. For all sprays with droplet charges defined through a scaling law relationship, the normalized root‐mean‐square errors range from 9.0% to 31.6% for mean droplet diameters, 10.4% to 67.9% for mean axial droplet velocities and 16.8% to 38.6% for mean radial droplet velocities. Lastly, we present a brief set of general recommendations for simulating electrostatically atomized dielectric liquid sprays.Copyright © 2013 John Wiley & Sons, Ltd.     

SYNTHESIS OF MONO-AND DIALKYLPHOSPHATES BY THE REACTIONS OF HYDROXYCOMPOUNDS WITH THE PHOSPHORUS PENTAOXIDE UNDER MICROWAVE IRRADIATION

The reactions of phosphorus pentoxide with two alcohols and one phenol were performed in different conditions under microwave irradiation. The products (alkylphosphates and dialkylphosphates) were identical to those formed by classic heating and were obtained with better yields. The speed of the reaction was increased by a factor from 100 to 4000.     

α,β-Unsaturated γ-Oxo Carboxylic Acids in Heterocylic Synthesis II. Behavior of 4-(5,5-Dioxodibenzothiophen-2-yl)-4-oxo-2-butenoic Acid Towards Carbon Nucleophiles under Michael Reaction Condition

4-(5,5-Dioxodibenzothiophen-2-yl)-4-oxo-2-butenoic acid ( 1 ) was condensed with compounds containing active methylene groups under Michael reaction conditions to form the Michael adducts 2a-c , 3a-c , and 4a-b . The behavior of Michael adduct towards the action of hydrazine hydrate was investigated. The compounds were tested for biological properties.     

Investigation of 7-((dioctylamino)methyl)quinoline-8-ol for uptake and removal of uranyl ions

A new 8-hydroxyquinoline derivative extractant was synthesized via the Mannich reaction from a secondary amine. Various analytical techniques (¹H, ¹³C NMR, FTIR, mass spectroscopy) were used to characterize our product. The use of this new extractant for the uptake and removal of uranyl ions in aqueous solution was investigated. Conditions for an effective sorption were optimized with respect to different experimental parameters in batch process. The results showed that the extraction rate increases for solutions with a pH in the range [0.65–1.13]. The total sorption capacity was 105 (mg g^?1) under optimum experimental conditions. The extraction of UO₂ ²⁺ was found to be quantitative (100 %) at initial uranyl concentration less than or equal to 41.59 mg/L. Thermodynamic parameters showed the adsorption of an endothermic process and a spontaneous nature, respectively.     

A comparative study of the thermal behaviour of phosphate washing sludge from Tunisia and Morocco

Journal of Thermal Analysis and Calorimetry - The aim of the present work is to characterize the phosphate sludge from two different countries: Morocco and Tunisia, and to study the difference...     

Solvation Rule for Solid‐Electrolyte Interphase Enabler in Lithium‐Metal Batteries

Despite the exceptionally high energy density of lithium metal anodes, the practical application of lithium‐metal batteries (LMBs) is still impeded by the instability of the interphase between the lithium metal and the electrolyte. To formulate a functional electrolyte system that can stabilize the lithium‐metal anode, the solvation behavior of the solvent molecules must be understood because the electrochemical properties of a solvent can be heavily influenced by its solvation status. We unambiguously demonstrated the solvation rule for the solid‐electrolyte interphase (SEI) enabler in an electrolyte system. In this study, fluoroethylene carbonate was used as the SEI enabler due to its ability to form a robust SEI on the lithium metal surface, allowing relatively stable LMB cycling. The results revealed that the solvation number of fluoroethylene carbonate must be ≥1 to ensure the formation of a stable SEI in which the sacrificial reduction of the SEI enabler subsequently leads to the stable cycling of LMBs.     

Antimicrobial and Antioxidant Properties of Total Polyphenols of Anchusa italica Retz

Anchusa italica Retz has been used for a long time in phytotherapy. The aim of the present study was to determine the antioxidant and antibacterial activities of extracts from the leaves and roots of Anchusa italica Retz. We first determined the content of phenolic compounds and flavonoids using Folin–Ciocalteu reagents and aluminum chloride (AlCl₃). The antioxidant activity was determined using three methods: reducing power (FRAP), 2.2-diphenyl-1-picrylhydrazyl (DPPH), total antioxidant capacity (TAC). The antimicrobial activity was investigated against four strains of Escherichia coli, two strains of Klebsiella pneumoniae and coagulase-negative Staphylococcus, and one fungal strain of Candida albicans. The results showed that the root extract was rich in polyphenols (43.29 mg GAE/g extract), while the leave extract was rich in flavonoids (28.88 mg QE/g extract). The FRAP assay showed a strong iron reduction capacity for the root extract (IC₅₀ of 0.11 µg/mL) in comparison to ascorbic acid (IC₅₀ of 0.121 µg/mL). The DPPH test determined an IC₅₀ of 0.11 µg/mL for the root extract and an IC₅₀ of 0.14 µg/mL for the leaf extract. These values are low compared to those for ascorbic acid (IC₅₀ of 0.16 µg/mL) and BHT (IC₅₀ 0.20 µg/mL). The TAC values of the leaf and root extracts were 0.51 and 0.98 mg AAE/g extract, respectively. In vitro, the extract showed inhibitory activity against all strains studied, with diameters of zones of inhibition in the range of 11.00–16.00 mm for the root extract and 11.67–14.33 mm for the leaf extract. The minimum inhibitory concentration was recorded for the leaf extract against E. coli (ATB:57), corresponding to 5 mg/mL. Overall, this research indicates that the extracts of Anchusa italica Retz roots and leaves exert significant antioxidant and antibacterial activities, probably because of the high content of flavonoids and polyphenols.