Implementation of recycling routes for scanning probe microscopy tips.

In this work, effective, yet simple, recycling mechanisms for used scanning probe microscopy (SPM) tips were implemented. Comprising a tip profile characterization methodology and specific cleaning procedures, which decontaminate SPM tips whether the contamination nature is known or not, such routes were optimized during numerous tests with brand new, previously used, and already discarded categories of SPM tips. The results show that if the used tip suffered contamination only, but no physical damages, during its scanning lifetime, it becomes readily available for reutilization after the cleansing process, characterizing a recycling route. On the other hand, if the tip went through wear and breakages during its utilization, it still can be decontaminated, but may not be directly reutilized due to its inadequate physical profile. Nevertheless, the methodology developed in this work may yet be applied as part of a more complex recycling route.     

Thermolyzable polymer networks and star polymers containing a novel,compact, degradable acylal‐based dimethacrylate cross‐linker: Synthesis,characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross‐linker, 1,1‐ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride‐catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross‐linker was demonstrated by using it for the preparation of one neat cross‐linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross‐linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross‐linker (isomer of EDDMA) were also prepared via GTP. The number of arms of the EDDMA‐based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA‐based MMA networks were higher than those of their EGDMA‐based counterparts. Although none of the EDDMA‐containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 °C within 1 day giving lower molecular weight products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5811–5823, 2007     

QSAR modeling with the electrotopological state indices: Corticosteroids

A structure-activity analysis of a series of steroids binding to corticosteroid-binding globulin was made using the electrotopological state index for each atom in the molecule. Two indices were found to correlate well with the binding affinity. The indices encode structural characteristics in the A and the D rings of the steroids in the study. One of the indices was formulated as the difference between two indices in the A ring. The two were not intercorrelated, suggesting that the composite index signals the influence of structure changes in or near the A ring that can be monitored by the composite index. This is a new observation using this structure-activity method. It is suggested that this model makes some contributions towards detection of the pharmacophore.     

Reaction of allylsilanes and allylstannanes with alkynes catalyzed by electrophilic late transition metal chlorides

The intramolecular reaction of allylsilanes and allylstannanes with alkynes proceeds catalytically in the presence of Pt(II), Pd(II), Ru(II), and Au(III) chlorides. Although more limited, AgOTf also catalyzes the cyclization. Usually, PtCl2 as the catalyst in methanol or acetone gives the best results. The reaction proceeds by exo attack of the allyl nucleophile on the alkyne to form five- or six-membered ring carbocycles. The reaction generally proceeds with anti stereoselectivity. However, a terminally substituted trimethylsilyl derivative reacts by a syn-type addition. The intermediate alkenylpalladium complex has been trapped with allyl chloride to form an allylated derivative with an additional carbon-carbon bond.     

Substituent effects on the photophysical properties of pterin derivatives in acidic and alkaline aqueous solutions

Pterins are heterocyclic compounds with important biological functions, and most of them may exist in two acid-base forms in the pH range between 3 and 13 in aqueous solution. In this work, the photophysical properties of acid and basic forms of six compounds of the pterin family (6-hydroxymethylpterin [HPT], 6-methylpterin [MPT], 6,7-dimethylpterin [DPT], rhamnopterin [RPT], N-methylfolic acid [MFA], and pteroic acid [PA]) have been studied. The effects of the chemical nature of the substituents at position 6 of the pterin moiety and the effects of the pH on the absorption and emission properties are analyzed. The fluorescence characteristics (spectra, quantum yields, lifetimes) of these compounds have been investigated using the single-photon-counting technique. Results obtained for pterin derivatives containing small substituents with 1 carbon atom (HPT, MPT, DPT) and short hydrocarbon chain (4 carbon atoms) (RPT) are different from those found for pterin derivatives containing a p-aminobenzoic acid (PABA) moiety in the substituent (MFA and PA). Fluorescence quantum yields (Phi(F)) of the first group of compounds are relatively high (>/=0.4), whereas MFA and PA exhibit very small Phi(F) values (相似文献   

Aza-analogues of extended tetrathiafulvalenes

The phosphoramidate-like reaction of 1,3-dithiole derived N-(diethoxyphosphinyl)hydrazones with formyl derivatives of 1,3-dithiole affords the longest aza-analogues of extended tetrathiafulvalenes with a polyenic spacer reported to date. Their structural and electrochemical properties are discussed.     

Fundamental studies of mixed-gas inductively coupled plasmas

The effects of adding foreign gases to the central-gas flow or the intermediate-gas flow of an argon inductively coupled plasma are presented. In particular, the influence of up to 16.7% added helium, nitrogen or hydrogen on radially-resolved electron number density, electron temperature, gas-kinetic temperature and calcium ion emission profiles is examined. It is shown that these gases affect not only the fundamental parameters and bulk properties of the plasma, but also how energy is coupled and transported through the discharge and how that energy interacts with the sample. For example, added helium causes an increase in the gas-kinetic temperature, most likely due to the higher thermal conductivity of helium compared to argon but, in general, does not appear to affect significantly either the electron temperature or electron concentration. The shift in the calcium ion emission profile towards lower regions in the discharge with added helium may be attributable to higher droplet desolvation and particle vaporization rates. In contrast, the addition of nitrogen or hydrogen to an Inductively Coupled Argon Plasma (Ar ICP) results in dramatic changes in all three fundamental plasma parameters: electron number density, electron temperature, and gas-kinetic temperature. The net effect of these molecular gases (N₂ or H₂) on calcium ion emission and on the fundamental plasma parameters is shown to be dependent on the amount of gas added to the plasma and whether the gas is introduced as part of the central- or intermediate-gas flow. In general, nitrogen added to the central-gas flow causes a significant reduction in the number of electrons throughout most of the discharge (over an order of magnitude in certain regions), mainly in the central and upper zones of the ICP. A drop of 3000–5000 K in the central channel electron temperature and a smaller drop in the gas-kinetic temperature are also observed when N₂ is added to the central-gas flow. In contrast, the introduction of nitrogen in the intermediate flow causes about a 1 × 10¹⁵ electrons cm⁻³ increase in the electron concentration in the low, toroidal regions of the plasma and an increase in the gas-kinetic temperature of around 1000 K throughout most of the discharge. As seen with the addition of nitrogen to the central-gas flow, the electron temperature is found to increase in the toroidal zones of the plasma when N₂ is added to the intermediate flow. These combined effects cause a 20-fold depression in the calcium ion emission intensity only a 1.7-fold depression when N₂ is added to the central- or intermediate-gas flows, respectively. On the other hand, hydrogen causes a depression in the electron concentration in the upper areas of the plasma when this gas is added to the central flow but increases the number of electrons in the same region when added to the intermediate flow. Hydrogen also causes a dramatic effect on the electron and gas-kinetic temperatures, significantly increasing both of these parameters throughout the discharge. An increase in the calcium ion emission intensity, accompanied by a downward shift, elongation and broadening of the calcium ion emission profile is also observed with H₂ addition.     

A new method to study antioxidant capability: hydrogen transfer from phenols to a prefluorescent nitroxide

[reaction: see text]. Rate constants for hydrogen abstraction from phenols by a prefluorescent-TEMPO probe are reported. The nitroxide is employed as a potential model of peroxyl radicals. The probe works by nitroxide suppression of the fluorescence of the chromophore. The fluorescence is restored when the nitroxide abstracts a hydrogen atom to produce the diamagnetic hydroxylamine. The phenols studied in this project exhibited rate constants between 0.003 and 0.2 M(-1) s(-1). A deuterium isotope effect of 10 for TROLOX confirms that the mechanism is dominated by hydrogen transfer.     

Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.