Carbon precipitation and diffusion in SiGeC alloys under silicon self-interstitial injection

In this work we investigate the diffusion and precipitation of supersaturated substitutional carbon in 200-nm-thick SiGeC layers buried under a silicon cap layer of 40 nm. The samples were annealed in either inert (N₂) or oxidizing (O₂) ambient at 850 °C for times ranging from 2 to 10 h. The silicon self-interstitial (I) flux coming from the surface under oxidation enhances the C diffusion with respect to the N₂-annealed samples. In the early stages of the oxidation process, the loss of C from the SiGeC layer by diffusion across the layer/cap interface dominates. This phenomenon saturates after an initial period (2–4 h), which depends on the C concentration. This saturation is due to the formation and growth of C-containing precipitates that are promoted by the I injection and act as a sink for mobile C atoms. The influence of carbon concentration on the competition between precipitation and diffusion is discussed. Received: 19 October 2001 / Accepted: 19 December 2001 / Published online: 20 March 2002 / Published online: 20 March 2002     

A non-isothermal Ginzburg–Landau model in superconductivity: Existence,uniqueness and asymptotic behaviour

In this paper we study a Ginzburg–Landau model which describes the behaviour of a superconducting material including thermal effects. We extend the traditional formulation of the problem, by introducing the temperature as an additional state variable. Accordingly, together with the Gor’kov–Eliashberg system, we introduce an evolution equation for the absolute temperature. We examine in detail the case which allows only variations of the concentration of superconducting electrons and of the temperature, neglecting the electromagnetic field. For this problem existence and uniqueness of the solution are shown. Finally we analyze the asymptotic behaviour of the solutions, proving that the system possesses a global attractor.     

Influence of channeling effects on ion distribution and damage profiles during high energy ion implantation in Si

Nitrogen implantation has been performed in silicon [001] crystals in carefully controlled alignment conditions. The channeling effects are clearly evident when implanting in [001] and [011] directions at energies ranging from 0.6 to 1.4 MeV. Both ion distribution and damage profiles are strongly influenced by channeling effects during ion implantation. The angular region around the [001] direction has been also investigated by implanting at small angles with respect to the axis. The same kind of study has been performed by implanting at different angles with respect to the planar (011) direction. The ion distributions (investigated by SIMS) show a strong dependence upon the alignment conditions. Moreover in high energy ion implantation, the lattice damage is located deep inside the crystal, leaving the surface layer almost unperturbed. The channeling effects on the damage production have been investigated by double crystal diffraction (DCD) in the low-dose regime and by RBS-channeling experiments (after implantation at doses greater than 1 × 10¹⁵ cm^–2) and for different ion alignment conditions.A big increase in the ion ranges and a strong reduction in the lattice damage is evident when implanting along major crystal axes. No saturatíon of the lattice damage and of the channelled component of the beam has been detected if the implantation is performed parallel to the [011] axis.     

Oesophageal cancer treated by photodynamic therapy alone or followed by radiation therapy

Photodynamic therapy (PDT) with porphyrins and red light is receiving increasing attention in the management of malignant tumours. At present PDT is primarily indicated for the treatment of superficial or early-stage lesions. At the Department of Radiotherapy and the First Institute of Surgery in Padova (Italy) more than 150 cases of tumours of different types have been treated using this technique. This paper briefly describes 21 cases of superficial oesophageal cancer. A complete response was observed in 11 of 21 cases. Radiation therapy appeared to be very effective as a salvage treatment of non-response patients.     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.     

Ion chromatography characterization of polysaccharides in ancient wall paintings

Specific programming of automated HPLC systems allows total on-line qualification, validation and stability monitoring using the concept of deferred standards. Setting up such a process for routine analyses in an automated HPLC system requires specific autosampler programming as well as specific monitoring software. With an autosampler, a double injection procedure is programmed, the first introducing the sample, and the second, a few minutes deferred, the deferred control standard. Two additional compounds are therefore added to the sample before and during the chromatographic process: the intemal standard for sample quantification and the deferred standard for system control. Specific methodologies are described of how to obtain classical quantitative analysis information as well as system qualification validation stability information. Experiments were performed to develop specified methodologies to monitor the quality of quantitative analysis during the life of the column by using the deferred standard concept to probe the effects of column ageing on separation characteristics.     

1,2-Oxopalladation versus pi-allyl palladium route. A regioconvergent approach to a key intermediate for cyclopentanoids synthesis. New insights into the Pd(II)-catalyzed lactonization reaction

Regioconvergent synthesis of the key lactone 1 from an equimolar mixture of the two olefins 4 and 5 was achieved by unique Pd(II) chemistry. The synthetic versatility of lactone 1 has been demonstrated in the synthesis of iridoids and of the endo-Corey lactone 2, which is a key intermediate for the F(2)-isoprostane synthesis. Upon exposure of the sodium salts of 4 and 5 to a catalytic amount of Pd(OAc)(2) under oxygen, in the presence of AcOH, an isomeric lactone 12 was obtained in addition to the title compound 1. The Pd(II) lactonization was optimized by fine-tuning all the factors participating in the catalytic cycle: solvent, oxidant, co-oxidant, and Pd(II) source. The Hosokawa's heterobimetallic couple emerged as the catalyst of choice. With a Cu(II)-Pd(II) couple, the redox process was transferred to copper, and the formal oxidation state of palladium remained constant during the reaction. By virtue of this new methodology, lactone 1 was obtained in a rewarding 60% yield, along with isomeric lactone 12 in 30% yield. A detailed mechanistic study was carried out in order to elucidate the formation of lactones 1 and 12. Lactone 1 was formed from either olefin 8 or olefin 10; on the other hand, lactone 12 was formed exclusively from olefin 10. An intramolecular 1,2-acyloxypalladiation was invoked for the transformation of 8 into 1, whereas the pi-allyl complexes 13 and 11 were involved in the transformation of olefin 10 into 12 and 1, respectively.     

Homolytic substitutions in indolinone nitroxide radicals—I: Reaction with aroyloxyl radicals

Indolinone nitroxides undergo a homolytic substitution with aroyl oxyl radicals, leading to two isomers, 7-aroyloxy- and 5-aroyloxy-derivative, respectively, whose structures were assigned on the basis of the ESR hfccs and of the ¹H NMR spectra of the corresponding amines. The presence of aroyl oxyl radicals in the reaction medium was demonstrated by thermal decomposition of benzoyl peroxide in the presence of aromatic acids.     

New methods for the preparation of 1-phenyl-trans-cyclohexane-1,2-diol

In contrast with previous reports, it was found that the reaction of 1-phenylcyclohexene with peroxyformic acid is not entirely stereospecific, but gives some trans-1-phenylcyclohexane-1, 2-diol (IV) beside the cis-isomer (III). The reaction of 1-phenylcyclohexene oxide (II) with formic acid yielded a similar mixture of III and IV, while addition of trichloroacetic acid in benzene was entirely cis-stereospecific. Reaction of the epoxide II with potassium hydroxide took place only under very drastic conditions to give a small yield of III, while sodium 2-dimethylaminoethoxide added exclusively in a trans way, leading to the amino ether X, which was easily transformed into the trans-glycol IV. The latter compound was also the main product of the borohydride reduction of 2-hydroxy-2-phenylcyclohexanone (IX). Possible explanations of the observed stereochemical results are discussed.