Experimental designs and response surface modeling applied for the optimization of metal-cyanide complexes analysis by capillary electrophoresis

The development of capillary zone electrophoresis (CZE) methods for the determination of metal cyanide complexes in real samples showed some problems, such as the low detection signal of Au (CN)2- and the low resolution between Ni(II) and Fe(II) cyanides in gold processing solutions, and the lack of separation of Pt(CN)4(2-) and Pd(CN)4(2-) in the leachates from automobile catalytic converters. To optimize some analytical parameters, the present study thus focused on the application of experimental designs and multiregression models. The following factors were examined by a two-level factorial design: applied voltage, injection time, detection wavelength, buffer ion, ionic strength and buffer modifiers. For optimization of the CZE method, subsequent response-surface experiments with the important factors were made with the two kinds of leaching solutions. Optimal analytical conditions were obtained in each case, giving good detection signals and resolution for the components of the studied leachates.     

High-performance liquid chromatography of amino acids, peptides and proteins CXXV. Molecular dynamics simulation of n-butyl chains chemically bonded to silica-based reversed-phase high-performance liquid chromatography sorbents

The molecular dynamics method has been applied to investigate the conformations of n-butyl ligands immobilised onto an amorphous silica surface analogous to those utilised with silica-based RP-HPLC sorbents. Three systems were constructed which corresponded to ligand densities of 1.64, 2.67 and 3.69 μmol/m². A number of parameters related to the structure of the sorbent materials were derived in order to characterise the molecular properties of each system. These parameters included the hydrocarbon layer thickness, the frequency of gauche conformations, the distance distribution for carbon atoms and the diffusion coefficients of individual atoms in the n-butyl ligands. From these properties, the positions of chains with respect to the surface as well as their mobility were estimated. It was found that at higher densities, the n-butyl chains are predominantly perpendicular to the surface while at low density they are highly tilted or lying almost parallel to the surface. The degree of ligand flexibility decreased with increasing surface density. Mobility of individual carbon atoms as well as chain disorder increased with distance from the surface for all ligand densities. The simulated properties of n-butyl chains immobilised to a silica surface correlated well with results obtained by Fourier transform IR and ¹³C-cross polarisation magic angle spinning NMR experimental methods and statistical predictions of the behaviour of immobilised chains.     

Production,purification, and characterization of a low-molecular-mass xylanase from Aspergillus sp. and its application in baking

An extracellular xylanase produced by a Mexican Aspergillus strain was purified and characterized. Aspergillus sp. FP-470 was able to grow and produce extracellular xylanases on birchwood xylan, oat spelt xylan, wheat straw, and corncob, with higher production observed on corncob. The strain also produced enzymes with cellulase, amylase, and pectinase activities on this substrate. A 22-kDa endoxylanase was purified 30-fold. Optimum temperature and pH were 60 degrees C and 5.5, respectively, and isoelectric point was 9.0. The enzyme has good stability from pH 5.0 to 10.0, retaining >80% of its original activity within this range. Half-lives of 150 min at 50 degrees C and 6.5 min at 60 degrees C were found. K(m) and activation energy values were 3.8 mg/mL and 26 kJ/mol, respectively, using birchwood xylan as substrate. The enzyme showed a higher affinity for 4-O-methyl-D-glucuronoxylan with a K(m) of 1.9 mg/mL. The enzyme displayed no activity toward other polysaccharides, including cellulose. Baking trials were conducted using the crude filtrate and purified enzyme. Addition of both preparations improved bread volume. However, addition of purified endoxylanase caused a 30% increase in volume over the crude extract.     

Study of ab initio molecular data for inelastic and reactive collisions involving the H3+ quasimolecule

The lowest two ab initio potential energy surfaces (PES), and the corresponding nonadiabatic couplings between them, have been obtained for the H3+ system; the molecular data are compared to those calculated with the diatomic in molecules (DIM) method. The form of the couplings is discussed in terms of the topology of the molecular structure of the triatomic. The method of Baer is employed to generate "diabatic" states and the residual nonadiabatic couplings are calculated. The ab initio results for these are markedly different from the corresponding DIM data, and show the need to consider the third PES.     

Enantioselective synthesis of 1-deoxy-d-gulonojirimycin from a phenylglycinol-derived lactam

Cyclocondensation of (R)-phenylglycinol with appropriately γ-substituted δ-oxo acid derivatives provides bicyclic lactams from which the enantioselective synthesis of 1-deoxy-d-gulonojirimycin has been reported.     

Na-montmorillonite hydrates under ethane rich reservoirs: NPzzT and muPzzT simulations

Na-montmorillonite hydrates in presence of ethane molecules are studied by means of hybrid Monte Carlo simulations in the NP(zz)T and muP(zz)T ensembles. The NP(zz)T ensemble allows us to study the interlaminar distance as a function of water and ethane content. These data show clear plateaus for lower ethane contents and mainly for water contents consistent with the formation of a single water layer. In addition, from this ensemble the structure for some of these interlaminar compositions were analyzed. For systems containing few ethane molecules and water enough to complete a single layer, it was observed that ethane mainly situates close to the interlayer midplane and adopts a nearly parallel arrangement to the clay surface. On the other hand, the muP(zz)T ensemble allows us to determine the interlaminar distance and water-ethane content for any specific reservoir. Here, some important findings are the following: the partial exchange of water by ethane molecules that enhances for decreasing the water vapor pressure; the obtention of a practically constant interlaminar space distance as a function of the water vapor pressure; the conservation of ion solvation shells; the enhancement of the water-ethane exchange for burial conditions; and finally, the incapability for a dehydrated clay mineral to swell in a dry and rich ethane atmosphere.     

Propane/propylene separation by selective olefin adsorption on Cu/SBA-15 mesoporous silica

Samples of mesoporous silica, SBA-15, were prepared under hydrothermal conditions and Cu cations were incorporated into the framework by two different impregnation techniques. The corresponding adsorption/desorption isotherms of propylene, propane, and N₂ were measured to evaluate the material's effectiveness in the separation of propane/propylene mixtures. Adsorption uptake of propylene increased and that of propane decreased in Cu containing samples as compared to the uptakes observed in undoped SBA-15 samples. It was demonstrated that the presence of Cu atoms in the adsorbent lattice led to a greater selectivity towards propylene. Furthermore, the highest level of Cu(I) were obtained in samples prepared by equilibrium impregnation, which in turn improved the olefin/paraffin uptake ratio. Under some working conditions, the amount of propylene adsorbed in selected samples is totally reversible while propane uptake was negligible.     

Binuclear Cu2+ complex mediated discrimination between L-glutamate and L-aspartate in water

L-glutamate and L-aspartate selectivity is achieved by the action of two Cu2+ metal ions rightly disposed in a cyclophane-type macrocyclic framework; electrochemical sensing of glutamate has been achieved by adsorption of the copper complexes on graphite electrodes.