Ternary and tetrahedral symmetry in hybrid fluorides, fluoride carbonates and carbonates

Tren amine cations and carbonate anions adopt a ternary symmetry while tetra amine cations are tetrahedral. The symmetry of these constitutive ions influences strongly the nature of the solids which crystallise from solutions. Large fluorinated aluminate polyanions with tetrahedral symmetry appear in the presence of tren amine, while infinite chains of AlF₆ octahedra are observed with tetra amine and that noncentrosymmetric structures are frequently encountered in rare earth fluoride carbonates.     

A new approach for the derivation of bounds for the Jensen difference

There are many useful applications of Jensen's inequality in several fields of science, and due to this reason, a lot of results are devoted to this inequality in the literature. The main theme of this article is to present a new method of finding estimates of the Jensen difference for differentiable functions. By applying definition of convex function, and integral Jensen's inequality for concave function in the identity pertaining the Jensen difference, we derive bounds for the Jensen difference. We present integral version of the bounds in Riemann sense as well. The sharpness of the proposed bounds through examples are discussed, and we conclude that the proposed bounds are better than some existing bounds even with weaker conditions. Also, we present some new variants of the Hermite–Hadamard and Hölder inequalities and some new inequalities for geometric, quasi-arithmetic, and power means. Finally, we give some applications in information theory.     

Ultrasonic-assisted leaching of trace metals from sediments as a function of pH

The effects of ultrasonication on the leaching of trace metals form sediments as a function of pH have been investigated using atomic absorption spectrometry. Cu, Pb, Ni, Zn and Mn were leached from sediments by ultrasonic effect using phthalate buffers at pH values of 2.2-6.0. Parameters influencing leaching, such as leaching time, solution matrix, wet or dry sample and final pH were evaluated. Results from ultrasonic leaching experiments were comparable to those of conventional procedure. In addition, this ultrasonic-assisted leaching method reduces the time required for conventional method approximately from 12 h to 25 min. Depending on the metal and sample type, metal removal increased linearly or exponentially with decreasing pH. The accuracy of the method was tested by comparing obtained results with this of conventional method. The average relative standard deviation (R.S.D.) of ultrasonic-assisted leaching method (ULM) varied between 1.71 and 3.00% for N = 36, depending on the analyte. This technique shows promise for studying chemical and biological availability and uptake/release processes for metals in sediment and soil as a function of pH.     

Concanavalin a immobilized affinity adsorbents for reversible use in yeast invertase adsorption

Concanavalin A (Con A) immobilized poly(2-hydroxyethyl methacrylate) (PHEMA) beads were investigated for specific adsorption of yeast invertase from aqueous solutions. PHEMA beads were prepared by a suspension polymerization technique with an average size of 150-200 microm, and activated by epichlorohydrin. Con A was then immobilized by covalent binding onto these beads. The maximum Con A immobilization was found to be 10 mg/g. The invertase-loading capability of the PHEMA/Con A beads was 107 mg/g. The maximum invertase adsorption capacity on the PHEMA/Con A adsorbents was observed at pH 5.0. The values of the Michaelis constant K(m) of invertase were significantly larger upon adsorption, indicating decreased affinity by the enzyme for its substrate, whereas V(max) was smaller for the adsorbed invertase. Adsorption improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with adsorption. The adsorbed enzyme activity was found to be quite stable in repeated experiments. Storage stability of adsorbed invertase.     

Numerical Study on an RBF-FD Tangent Plane Based Method for Convection–Diffusion Equations on Anisotropic Evolving Surfaces

In this paper, we present a fully Lagrangian method based on the radial basis function (RBF) finite difference (FD) method for solving convection–diffusion partial differential equations (PDEs) on evolving surfaces. Surface differential operators are discretized by the tangent plane approach using Gaussian RBFs augmented with two-dimensional (2D) polynomials. The main advantage of our method is the simplicity of calculating differentiation weights. Additionally, we couple the method with anisotropic RBFs (ARBFs) to obtain more accurate numerical solutions for the anisotropic growth of surfaces. In the ARBF interpolation, the Euclidean distance is replaced with a suitable metric that matches the anisotropic surface geometry. Therefore, it will lead to a good result on the aspects of stability and accuracy of the RBF-FD method for this type of problem. The performance of this method is shown for various convection–diffusion equations on evolving surfaces, which include the anisotropic growth of surfaces and growth coupled with the solutions of PDEs.     

Coumarin-based D–π–A dyes for efficient DSSCs: DFT and TD-DFT study of the π-spacers influence on photovoltaic properties

Research on Chemical Intermediates - A series of D–π–A architectures dyes with Coumarin-based derivatives as difluorenylaminocoumarin (DF) and diphenylaminocoumarin (DP) have been...     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

A thermostated coupled apparatus for the simultaneous determination of adsorption isotherms and differential enthalpies of adsorption at high pressure and high temperature

In order to assess and improve the quality of high pressure and temperature adsorption isotherms and differential enthalpies of adsorption on microporous and mesoporous materials, a specific thermostated device comprising a differential heat flow calorimeter coupled with a home-built manometric system has been built. The differential heat flow calorimeter is a Tian Calvet Setaram C80 model which can be operated isothermally, the manometric system is a stainless steel homemade apparatus. The thermostated coupled apparatus allows measurements for pressure up to 2.5?MPa and temperature from 303 to 423?K. Reliability and reproducibility were established by measuring adsorption isotherms on a benchmark sorbent (Filtrasorb F400). A detailed experimental study of the adsorption of pure carbon dioxide and methane has been made on activated carbons (Filtrasorb F400 and EcoSorb); a new procedure for determining the differential enthalpies of adsorption based on the stepwise method is also proposed. The error in the determination of the amount adsorbed is about 3.6%, and the error in the determination of the differential enthalpies of adsorption is 4%.