Pore assembled multilayers of charged polypeptides in microporous membranes for ion separation

In this study, highly permeable ion-selective membranes are prepared via immobilization of polyelectrolyte multilayer networks within the inner pore structure of a microporous (pore size = 0.2 microm) support. Electrostatic layer-by-layer assembly is achieved through alternate adsorption of cationic and anionic polyelectrolytes under convective flow conditions. To initiate pore assembly, the first layer consists of covalently bound charged polypeptides (poly(L-glutamic acid) (PLGA) or poly(L-lysine) (PLL)) establishing a charged support for subsequent adsorption. Nonstoichiometric immobilization of charged multilayers within a confined pore geometry leads to an enhanced volume density of ionizable groups in the membrane phase. This overall increase in the effective charge density allows for Donnan exclusion of ionic species (especially divalent co-ions) using microporous materials characterized by permeability values that exceed conventional membrane processes. Multilayer assemblies are fabricated using both PLGA/PLL and synthetic polyelectrolytes (poly(styrenesulfonate)/poly(allylamine)) in an attempt to compare the level of adsorption and separation properties of the resulting materials. The role of salt concentration in the carrier solvent on overall polyelectrolyte adsorption was examined to determine its effect on both solute (Cl-, SO4(2-), As(V)) and water transport. Constriction of the pore size induced by multilayer propagation was monitored through permeability measurements and dextran rejection studies at each stage of the deposition process.     

SciFinder-guided rational design of fluorescent carbon dots for ratiometric monitoring intracellular pH fluctuations under heat shock

Intracellular pH plays a significant role in various biological processes, including cell proliferation, apoptosis, metabolism, enzyme activity and homeostasis. In this work, a novel design strategy for the preparation of pH responsive carbon dots (CDs-pH) for ratiometric intracellular imaging was reported. By using SciFinder database, fluorescent CDs-pH with the required pK_a value of 6.84 were rationally designed, which is vital important for precise sensing of intracellular pH. As a result, the synthesized CDs-pH demonstrated robust ability to test pH fluctuations within the physiological range of 5.4-7.4. The CDs-pH was further utilized for fluorescent ratiometric imaging of pH in living HeLa cells, effectively avoided the influence of autofluorescence from native cellular species. Moreover, real-time monitoring of intracellular pH fluctuation under heat shock was successfully realized. This SciFinder-guided design strategy is simple and flexible, which has a great potential to be used for the development of other types of CDs for various applications.     

Synthesis and characterization of scandium silyl complexes of the type Cp*2ScSiHRR'. sigma-Bond metathesis reactions and catalytic dehydrogenative silation of hydrocarbons

The scandium dihydrosilyl complexes Cp*(2)ScSiH(2)R (R = Mes (4), Trip (5), SiPh(3) (6), Si(SiMe(3))(3) (7); Mes = 2,4,6-Me(3)C(6)H(2), Trip = 2,4,6-(i)()Pr(3)C(6)H(2)) and Cp*(2)ScSiH(SiMe(3))(2) (8) were synthesized by addition of the appropriate hydrosilane to Cp*(2)ScMe (1). Studies of these complexes in the context of hydrocarbon activation led to discovery of catalytic processes for the dehydrogenative silation of hydrocarbons (including methane, isobutene and cyclopropane) with Ph(2)SiH(2) via sigma-bond metathesis.     

In situ soft X-ray studies of ethylene oxidation mechanisms and intermediates on the Pt(111) surface

In situ studies of ethylene oxidation on Pt(111) have been performed using a powerful combination of fluorescence yield soft X-ray methods for temperatures up to 600 K and oxygen pressures up to 0.01 Torr. Absolute carbon coverages have been determined both in steady-state and dynamic catalytic conditions on the Pt(111) surface. Fluorescence yield near-edge spectroscopy (FYNES) and temperature-programmed fluorescence yield near-edge spectroscopy (TP-FYNES) experiments above the carbon K edge were used to identify the structure and bonding of the dominant surface species during oxidation. TP-FYNES experiments of preadsorbed ethylene coverages in oxygen pressures up to 0.01 Torr indicate a stable intermediate is formed over the 215-300 K temperature range. By comparing the intensity of the C-H sigma resonance at the magic angle with the intensity in the carbon continuum, the stoichiometry of this intermediate has been determined explicitly. Based on calibration with known C-H stoichiometries, the intermediate has a C(2)H(3) stoichiometry for oxygen pressures up to 0.01 Torr, indicating oxydehydrogenation occurs before skeletal oxidation. FYNES spectra at normal and glancing incidences were performed to characterize the structure and bonding of this intermediate. Using FYNES spectra of ethylene, ethylidyne, and acetylene as reference standard, this procedure indicates the oxidation intermediate is tri-sigma vinyl. Thus, oxidation of ethylene proceeds through a vinyl intermediate, with oxydehydrogenation preceding skeletal oxidation.     

Reactions of a carbene stabilised indium trihydride complex, [InH3{CN(Mes)C2H2N(Mes)}] Mes = mesityl,with transition metal complexes

The reactivity of the carbene stabilised indium trihydride complex, [InH₃(IMes)] IMes = 1,3-dimesitylimidazol-2-ylidene, toward a variety of transition metal complexes has been investigated. The study has shown that the InH₃ complex can act as a carbene and/or hydride transfer reagent to transition metal centres but does not yield heterobimetallic materials. Two new complexes, [Cp₂Ti(-Cl)₂Zn(IMes)Cl] and [CpNi(H)(IMes)], have resulted from this work, both of which have been spectroscopically and structurally characterised.     

Synthesis, characterization, and preliminary intramolecular energy transfer studies of rigid, emissive, rhenium-linked porphyrin dimers

The reaction of pyridyl functionalized porphyrins with Re(CO)(5)Cl in THF results in the formation of porphyrin dimers which, despite incorporation of rhenium into the assemblies, remain fluorescent. The rigid compounds provide an efficient geometry and/or orbital pathway for singlet energy transfer, rendering these compounds suitable, in principle, for the study of both through-bond and through-space energy transfer. Derivatives containing both metallated and freebase porphyrins connected via the metal corners display efficient porphyrin-porphyrin energy transfer. The photophysical properties of the assemblies have been studied by both steady-state and time-resolved fluorescence techniques, yielding approximate rates and efficiencies for porphyrin-porphyrin energy transfer.     

A comparative study of heavy-atom effects on the room-temperature phosphorescence of biologically important purines

Room-temperature phosphorescence (r.t.p.) of nine biologically important purines on filter paper is studied. The heavy-atom effect leads to a significant enhancement of r.t.p. signals, with the trend being Tl⁺ > Pb²⁺ ? I — ? Sm³⁺ for most purines. Absolute limits of detection range from 40 pg (purine) to 19 ng (theophylline).     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.