多机型航班恢复问题研究

主要研究了基于航班延误时间最短的航班行程规划问题,分别建立了最基本的多机型航班恢复问题模型、考虑旅客行程重新规划的航班恢复问题模型.在约束条件下,先在单机型航班恢复的基础上考虑多机型航班恢复,最后考虑基于飞机载客量的多机型航班恢复.构建时空网络模型,结合改进的分支定界法和启发式算法,确定筛选范围,调整不同的影响范围,达到较优的结果.对于多机型航班恢复问题,得到航班总延误时间为12850分钟.接着分析考虑飞机载客量的多机型航班恢复问题,分析建立的模型得到航班总延误时间为约1886650分钟.建立的模型有较好的鲁棒性,且具有较好的实用性.     

纳米结构超疏水表面冷凝现象的三维格子玻尔兹曼方法模拟

采用三维多相流格子玻尔兹曼方法 (lattice Boltzmann method, LBM),对纳米结构超疏水表面液滴的冷凝行为进行模拟研究.通过Laplace定律和光滑表面的本征接触角理论对三维LBM模型进行定量验证.模拟分析了超疏水表面纳米阵列的几何尺寸和润湿性的局部不均匀性对冷凝液滴形核位置和最终润湿状态的影响规律.结果表明,较高的纳米阵列使液滴在纳米结构间隙的上部侧面和底部优先形核长大,通过采用上下不均匀的间隙可避免液滴在底部形核长大,而在上部侧面形核的冷凝液滴在生长过程中向上运动,其润湿状态由Wenzel态转变为Cassie态;较低的纳米阵列使液滴在纳米结构底部优先形核长大,液滴的最终润湿状态为Wenzel态;润湿性不均匀的纳米结构表面使液滴在阵列顶端亲水位置处优先形核长大,成为Cassie态.冷凝液滴在不同几何尺寸的纳米结构表面上的最终润湿状态的模拟结果与文献报道的实验结果符合良好.通过模拟还发现,冷凝液滴在生长过程中的运动行为与液滴统计平均作用力的变化有关.本文的LBM模拟再现了三维空间中液滴的形核、长大和润湿状态转变等物理现象.     

基于TFN-隶属度软化的露天矿岩体质量评价方法研究

为了解露天矿岩体质量,从露天矿某竖向范围的围岩、矿体顶板、矿体和矿体底板四个特征位置进行取样确定一定范围内的露天矿质量.岩石抗压强度R_c、黏聚力C、内摩擦角φ和岩体变形模量E作为评价的指标体系,并形成单因素指标岩体分类的五个级别.通过TFN确定指标的相对权重.提出隶属度软化方式,在确定样本对某级别的隶属度的同时,考虑其与相邻两级别隶属可能性,即隶属度软化,以方便样本的多指标评价.评价最大隶属度级别即是样本所属级别,最终根据各个样本的质量等级和综合评判规则判断露天矿岩体质量.实验表明:提出的方法比RMR、Q和可拓学评价得到的样本质量评级略低,能考虑当地工程经验,并偏于安今.     

Numerical modeling of condensate droplet on superhydrophobic nanoarrays using the lattice Boltzmann method

In the present study,the process of droplet condensation on superhydrophobic nanoarrays is simulated using a multicomponent multi-phase lattice Boltzmann model.The results indicate that three typical nucleation modes of condensate droplets are produced by changing the geometrical parameters of nanoarrays.Droplets nucleated at the top(top-nucleation mode),or in the upside interpillar space of nanoarrays(side-nucleation mode),generate the non-wetting Cassie state,whereas the ones nucleated at the bottom corners between the nanoarrays(bottom-nucleation mode) present the wetting Wenzel state.Time evolutions of droplet pressures at the upside and downside of the liquid phase are analyzed to understand the wetting behaviors of the droplets condensed from different nucleation modes.The phenomena of droplet condensation on nanoarrays patterned with different hydrophilic and hydrophobic regions are simulated,indicating that the nucleation mode of condensate droplets can also be manipulated by modifying the local intrinsic wettability of nanoarray surface.The simulation results are compared well with the experimental observations reported in the literature.     

A multicomponent multiphase lattice Boltzmann model with large liquid–gas density ratios for simulations of wetting phenomena

A multicomponent multiphase(MCMP) pseudopotential lattice Boltzmann(LB) model with large liquid–gas density ratios is proposed for simulating the wetting phenomena. In the proposed model, two layers of neighboring nodes are adopted to calculate the fluid–fluid cohesion force with higher isotropy order. In addition, the different-time-step method is employed to calculate the processes of particle propagation and collision for the two fluid components with a large pseudoparticle mass contrast. It is found that the spurious current is remarkably reduced by employing the higher isotropy order calculation of the fluid–fluid cohesion force. The maximum spurious current appearing at the phase interfaces is evidently influenced by the magnitudes of fluid–fluid and fluid–solid interaction strengths, but weakly affected by the time step ratio.The density ratio analyses show that the liquid–gas density ratio is dependent on both the fluid–fluid interaction strength and the time step ratio. For the liquid–gas flow simulations without solid phase, the maximum liquid–gas density ratio achieved by the present model is higher than 1000:1. However, the obtainable maximum liquid–gas density ratio in the solid–liquid–gas system is lower. Wetting phenomena of droplets contacting smooth/rough solid surfaces and the dynamic process of liquid movement in a capillary tube are simulated to validate the proposed model in different solid–liquid–gas coexisting systems. It is shown that the simulated intrinsic contact angles of droplets on smooth surfaces are in good agreement with those predicted by the constructed LB formula that is related to Young's equation. The apparent contact angles of droplets on rough surfaces compare reasonably well with the predictions of Cassie's law. For the simulation of liquid movement in a capillary tube, the linear relation between the liquid–gas interface position and simulation time is observed, which is identical to the analytical prediction. The simulation results regarding the wetting phenomena of droplets on smooth/rough surfaces and the dynamic process of liquid movement in the capillary tube demonstrate the quantitative capability of the proposed model.     

温度梯度区域熔化作用下熔池迁移的元胞自动机模拟

本文采用耦合凝固和熔化效应的二维元胞自动机(cellular automaton, CA)模型,对温度梯度区域熔化(temperature gradient zone melting, TGZM)效应引起的熔池在固液两相区中的迁移现象进行模拟研究.模拟分析了抽拉速度、熔池初始位置、温度梯度和合金成分等因素对TGZM动力学的影响,并将模拟结果与解析模型的预测结果进行比较验证.通过模拟发现,在温度梯度作用下,熔池总是向着高温方向迁移;当抽拉速度低于或高于临界抽拉速度时,熔池朝向移动的液相线或固相线迁移;对于给定的抽拉速度,位于糊状区内临界位置以上的熔池会迁移进入液相,而位于临界位置以下的熔池会逐步靠近固相线.此外,温度梯度越高,合金成分越低,熔池的迁移速度越快.