排序方式: 共有47条查询结果,搜索用时 15 毫秒
1.
2.
本文研究了储氢合金表面处理,粒度分布,稀土组成和添加剂硼对储氢合金高倍率放电性能的影响及机制的探讨。采用物理方法和化学方法对储氢合金进行表面处理,提高了合金表面电化学反应速度,同时促进了氢原子在合金本体中的扩散,从而改善了合金的活化性能、放电容量和高倍率放电能力。储氢合金粉粒度太粗和太细都使合金电极阻抗增大,导致放电容量和高保率放电能力下降,而且大电流放电平台也较低,选择合适的储氢合金粉粒度分布既可提高合金的活性和放电容量又能改善合金高倍率放电能力。随着合金中La含量的增加和Ce含量的减少,提高了合金的表面活性,使合金的大电流放电性能得到改善。储氢合金中加入元素B,使合金易粉化并形成少量的第二相,不但改善了合金的活性和放电容量而且显著地提高了合金高倍率放电能力。 相似文献
3.
4.
5.
通常研究认为, 苏锡常地区超量开采地下水是产生地面沉降最主要的因素之一。锡山市地下水开采十分强烈, 其地面沉降灾害也最为严重。为了有效地分析研究地面沉降的发生发展过程, 必须获取一定时间间隔内的地面沉降实测值, 全球定位系统 (GPS)就是一种既经济又高效的测量手段。本文在简要介绍了锡山市地质、水文地质及地下水开发利用情况的基础上, 重点阐述了运用GPS测量技术对锡山市地面沉降进行首次实测的情况, 并对其测量结果进行了系统分析, 最后对锡山市地面沉降的发展历史和现状进行了初步讨论。 相似文献
6.
7.
Effects of Depolarization Field and Interfacial Coupling on the Polarization of Ferroelectric Bilayers 下载免费PDF全文
A ferroelectric bilayer model considering depolarization field and interfacial coupling is proposed and the expression of the depolarization field is derived. The spatial profiles of spontaneous polarization and hysteresis loops are calculated using the numerical method with and without considering the depolarization field. The effects of the depolarization field and interfacial coupling on the polarization of second-order ferroelectric bilayers are studied systematically. When interfacial coupling is ferroelectric coupling, the interface spontaneous polarization increases and the area of hysteresis loop becomes larger with increasing coupling. When interfacial coupling is antiferroelectric coupling, the depolarization field makes the central loop become smaller and the shape of the hysteresis loop becomes steep. Meanwhile, as interfacial coupling increases, the outer loops stretch further out horizontally and the size of the central loop widens. 相似文献
8.
9.
Conductive perovskite BaPb03 (BPO) films as a potential electrode material of PZT capacitors used in ferroelectric random access memory are prepared by rf magnetron sputtering. An x-ray diffractometer and standard four probe method are employed to investigate the dependence of growth conditions on crystal structure and conductivity of BPO films. It is found that BPO films with perovskite phase can be obtained at substrate temperatures above 425℃, and the sample with the lowest resistivity is obtained at 450℃ under pure argon atmosphere. Using this BPO film as electrode, ferroelectric properties of BPO/PZT/BPO and Pt/PZT/BPO sandwiched structures are evaluated. Their remanent polarization and coercive field are 36.6 ℃/cm^2 (81.3 k V/cm) and 36.9℃/cm^2 (89.1 kV/cm), respectively. The coercive field of the former structure is lower than that of the latter, but remanent polarizations are almost the same. In addition, the results imply that BPO electrode is helpful to improve the fatigue resistance of PZT. The reasons are discussed. 相似文献
10.
利用Sol-Gel法在Pt/Ti/SiO2/Si衬底上制备出Bi4Ti3O12和Bi3.25La0.75Ti3O12薄膜,研究了La掺杂对Bi4Ti3O12薄膜的晶体结构、铁电性能和疲劳特性的影响,发现La掺杂没有改变Bi4Ti3O12薄膜的基本晶体结构,并且提高了Bi4Ti3O12铁电薄膜的剩余极化值和抗疲劳性能,对La掺杂改善Bi4Ti3O12铁电薄膜性能的机理进行了讨论.
关键词:
铁电性能
4Ti3O12薄膜')" href="#">Bi4Ti3O12薄膜
3.25La0.75Ti3O12薄膜')" href="#">Bi3.25La0.75Ti3O12薄膜
sol-gel法
La掺杂 相似文献